InfoBlast Home

Table of Contents

Release Notes for Cisco  IOS Release  11.3(6)T Software Feature Packs---Cisco AS5200 Access Servers

Release Notes for Cisco  IOS Release  11.3(6)T Software Feature Packs---Cisco AS5200 Access Servers

December 7, 1998

These release notes discuss the Cisco IOS Release 11.3(6)T feature packs for Cisco AS5200 access servers.

These release notes contain the following topics:

Introduction

This section explains how to use this document, describes feature pack components, and has tables that define the aspects of a feature pack.

How to Use These Release Notes

The tables in these release notes contain details about the Cisco feature packs. Use these tables to perform the following tasks before loading a software image onto a router:

    1. Use Table 1, "Feature Pack Product Numbers Quick-Reference List," to identify the software image you want to load.

    2. Use Table 2, "Cisco Feature Pack Image Filenames and Memory Requirements," to identify your feature pack and the memory required for your feature set, based on the image you load.

    3. Use Table 4, "Cisco IOS Software Feature Sets for the Cisco AS5200 Access Server," to identify which features are supported in a feature set image.

    4. Use Table 5, "Cisco AS5200 Memory and Upgrade Options," to check the memory required for your feature set, determine the factory-default memory on the router, and view the available memory upgrades.

What Is a Feature Pack?

This section describes:

Feature Pack Components

A feature pack is a small box that contains the following items:

The heart of a feature pack is the CD-ROM that contains software images and the Router Software Loader (RSL), which is a Windows 95 application that loads an image onto an access router or server. Each feature pack CD-ROM contains at least one Cisco  IOS feature set. The CD booklet, Getting Started with the Router Software Loader, explains how to use the RSL to install the router image. If you cannot use the RSL to load images, you can follow the instructions in the "Installing Software Images Using a TFTP Server Application" section.

Before running the RSL, read the "Installing Software Images Using the RSL" section. If you are loading software on a preconfigured router, you should save the router configuration file on your PC before beginning the image download process, as described in Getting Started with the Router Software Loader.

Product Numbers Quick-Reference List

Table 1 lists the Cisco product numbers of the feature packs supported in this release.

Table 1: Feature Pack Product Numbers Quick-Reference List
Product Number Feature Pack Description

CD52-C-11.3=

Cisco AS5200 IP Feature Pack

CD52-CP-11.3=

Cisco AS5200 IP Plus Feature Pack

CD52-B-11.3=

Cisco AS5200 Desktop Feature Pack

CD52-BP-11.3=

Cisco AS5200 Desktop Plus Feature Pack

CD52-A-11.3=

Cisco AS5200 Enterprise Feature Pack

CD52-AP-11.3=

Cisco AS5200 Enterprise Plus Feature Pack

Feature Pack Overview Table

Table 2 identifies each feature pack as specified on the router software CD-ROM label, describes the feature sets in each feature pack, and lists the following: UNIX and DOS filenames of the images, memory requirements, and RSL installer description.


Table 2: Cisco Feature Pack Image Filenames and Memory Requirements
Model No. and CD-ROM Title Image Included UNIX Image Name DOS Image Name Flash Memory Req'd Main Memory Req'd Boot Flash Memory Req'd Shared Memory Req'd Software Description

CD52-C-11.3=

Cisco AS5200
IP Feature Pack Release 11.3(6)T

RSL Version 7.2

IP

c5200-i-l.113-6.T1

80257306

16 MB

8 MB

8 MB

4 MB

Cisco AS5200
IP Feature Set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

CD52-CP-11.3=

Cisco AS5200
IP Plus Feature Pack
Release 11.3(6)T

RSL Version 7.2

IP Plus

c5200-is-l.113-6.T1

80257006

16 MB

8 MB

8 MB

4 MB

Cisco AS5200
IP Plus feature set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

CD52-B-11.3=

Cisco AS5200
Desktop Feature Pack
Release 11.3(6)T

RSL Version 7.2

Desktop

c5200-d-l.113-6.T1

80257406

16 MB

16 MB

8 MB

4 MB

Cisco AS5200 Desktop feature set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

CD52-BP-11.3=

Cisco AS5200
Desktop Plus Feature Pack
Release 11.3(6)T

RSL Version 7.2

Desktop Plus

c5200-ds-l.113-6.T1

80257106

16 MB

16 MB

8 MB

4 MB

Cisco AS5200 Desktop Plus feature set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

CD52-A-11.3=

Cisco AS5200
Enterprise Feature Pack Release 11.3(6)T

RSL Version 7.2

Enterprise

c5200-j-l.113-6.T1

80257206

16 MB

16 MB

8 MB

4 MB

Cisco AS5200 Enterprise feature set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

CD52-AP-11.3=

Cisco AS5200
Enterprise Plus Feature Pack Release 11.3(6)T

RSL Version 7.2

Enterprise Plus

c5200-js-l.113-6.T1

80256906

16 MB

16 MB

8 MB

4 MB

Cisco AS5200 Enterprise Plus feature set
Release 11.3(6)T1

MICA Modem Portware

mica-modem-
portware.2.5.1.0.bin

80310301

MICA Modem Portware
Version 2.5.1.0

Microcom Modem Firmware

mcom-modem-code.
5.0.40.bin

80306201

Microcom Modem Firmware
Version 5.0.40

Feature Set Tables

The Cisco IOS software is packaged in feature sets (also called software images) depending on the platform. Each feature set contains a specific set of Cisco IOS features. This section shows the feature set matrix and the features supported by each feature set.

The following list shows which feature sets are supported on the Cisco AS5200 series access servers. These feature sets only apply to Cisco  IOS Release  11.3 T:

The feature set matrices (see Table 3 and Table 4) show the new feature set organization and list which feature sets are available on the Cisco AS5200 access servers for Cisco  IOS Release  11.3 T. The tables use the following terms:


Table 3:
Standard
Feature Sets 		Cisco  AS5200

IP

Basic, Plus

Desktop

Basic, Plus

Enterprise

Basic, Plus

Feature Set Matrix for AS5200

To determine what features are available with each feature set (software image), see Table 4. The table summarizes the features you can use when running a specific feature set on the Cisco  AS5200 access servers for Cisco IOS Release 11.3 T. Table 4 uses these terms:

Feature Set
Matrix Term 		Description

Yes

This feature is offered.

No

This feature is not offered.

In

The "In" column lists the Cisco IOS release that first introduces a feature. For example, (2) means a feature is introduced in 11.3(2)T. If a cell is empty in this column, the feature was included in the initial, base release.


Table 4: Cisco IOS Software Feature Sets for the Cisco AS5200 Access Server
Feature Set
 Feature In1 IP IP Plus Desktop Desktop
Plus 		Enterprise Enterprise
Plus
 IBM Support

APPN High Performance Routing

No

No

No

No

No

No

APPN MIB Enhancements

No

No

No

No

No

No

APPN over Ethernet LAN Emulation

No

No

No

No

No

No

APPN Scalability Enhancements

No

No

No

No

No

No

Bisync Enhancements, includes:

  • Bisync 3780 Support

  • BSC Extended Addressing

  • Block Serial Tunneling (BSTUN) over Frame Relay

No

No

No

No

Yes

Yes

Cisco MultiPath Channel (CMPC)

No

No

No

No

No

No

DLSw+ Enhancements, includes:

  • Backup Peer Extensions for Encapsulation Types

  • DLSw+ Border Peer Caching

  • DLSw+ MIB Enhancements

  • DLSw+ SNA Type of Service

  • LLC2-to-SDLC Conversion between PU4 Devices

  • NetBIOS Dial-on-Demand Routing

  • UDP Unicast Enhancement

No

No

No

No

Yes

Yes

FRAS Enhancements, includes:

  • FRAS Boundary Network Node Enhancement

  • FRAS Dial Backup over DLSw+

  • FRAS DLCI Backup

  • FRAS Host

  • FRAS MIB

  • SRB over Frame Relay

No

No

No

No

Yes

Yes

SRB over FDDI on Cisco 4000, 4500, and 4700 Series Routers

No

No

No

No

No

No

RIF Passthru in DLSw+

(3)

No

No

No

No

Yes

Yes

TN3270 LU Nailing

No

No

No

No

No

No

TN3270 Server Enhancements

No

No

No

No

No

No

Token Ring LANE

No

No

No

No

No

No

Tunneling of Asynchronous Security Protocols

No

No

No

No

Yes

Yes

Internet

DRP Server Agent

Yes

Yes

Yes

Yes

Yes

Yes

DRP Server Agent Enhancements

(2)

Yes

Yes

Yes

Yes

Yes

Yes

 IP Routing

Easy IP (Phase 1)

No

Yes

No

Yes

No

Yes

Hot Standby Router Protocol (HSRP) over ISL in Virtual LAN Configurations

No

No

No

No

No

No

IP Enhanced IGRP Route Authentication

Yes

Yes

Yes

Yes

Yes

Yes

IP Type of Service and Precedence for GRE Tunnels (CSCdj88415)

(4)

Yes

Yes

Yes

Yes

Yes

Yes

TCP Enhancements, includes:

  • TCP Selective Acknowledgment

  • TCP Timestamp

Yes

Yes

Yes

Yes

Yes

Yes

 LAN Support

AppleTalk Access List Enhancements

No

No

Yes

Yes

Yes

Yes

DECnet Accounting

No

No

Yes

Yes

Yes

Yes

IPX Named Access Lists

No

No

Yes

Yes

Yes

Yes

IPX SAP-after-RIP

No

No

Yes

Yes

Yes

Yes

NLSP Enhancements

No

No

No

No

Yes

Yes

NLSP Multicast Support

No

No

Yes

Yes

Yes

Yes

 Management

Cisco Call History MIB Command Line Interface

Yes

Yes

Yes

Yes

Yes

Yes

Cisco IOS Internationalization

Yes

Yes

Yes

Yes

Yes

Yes

Entity MIB, Phase 1

Yes

Yes

Yes

Yes

Yes

Yes

SNMPv2C

Yes

Yes

Yes

Yes

Yes

Yes

Virtual Profiles

Yes

Yes

Yes

Yes

Yes

Yes

VPDN MIB and Syslog Facility

(3)

No

Yes

No

Yes

Yes

Yes

 Multimedia

IP Multicast Load Splitting across Equal-Cost Paths

Yes

Yes

Yes

Yes

Yes

Yes

IP Multicast over ATM Point-to-Multipoint Virtual Circuits

No

No

No

No

No

No

IP Multicast over Token Ring LANs

No

No

No

No

No

No

PIM Version 2

Yes

Yes

Yes

Yes

Yes

Yes

Stub IP Multicast Routing

Yes

Yes

Yes

Yes

Yes

Yes

Quality of Service

RTP Header Compression

Yes

Yes

Yes

Yes

Yes

Yes

Security

Named Method Lists for AAA Authorization and Accounting

(3)

Yes

Yes

Yes

Yes

Yes

Yes

Additional Vendor-Proprietary RADIUS Attributes

(3)

Yes

Yes

Yes

Yes

Yes

Yes

Automated Double Authentication

(3)

Yes

Yes

Yes

Yes

Yes

Yes

Double Authentication

Yes

Yes

Yes

Yes

Yes

Yes

Encrypted Kerberized Telnet

No

No

No

No

No

No

HTTP Security

Yes

Yes

Yes

Yes

Yes

Yes

MS-CHAP Support

(3)

No

No

No

No

Yes

Yes

Per-User Configuration

Yes

Yes

Yes

Yes

Yes

Yes

Reflexive Access Lists

Yes

Yes

Yes

Yes

Yes

Yes

TCP Intercept

No

No

No

No

Yes

Yes

Vendor-Proprietary RADIUS Attributes

Yes

Yes

Yes

Yes

Yes

Yes

 Switching

AppleTalk Routing over ISL and IEEE 802.10 in Virtual LANs

No

No

No

No

No

No

CLNS and DECnet Fast Switching over PPP

No

No

No

No

Yes

Yes

DECnet/VINES/XNS over ISL, includes:

  • Banyan VINES Routing over ISL Virtual LANs

  • DECnet Routing over ISL Virtual LANs

  • XNS Routing over ISL Virtual LANs

No

No

No

No

Yes

Yes

Fast-Switched Policy Routing

Yes

Yes

Yes

Yes

Yes

Yes

IPX Routing over ISL Virtual LANs

No

No

No

No

No

No

VIP Distributed Switching Support for IP Encapsulated in ISL

No

No

No

No

No

No

 Terminal Services

Telnet Extensions to Dialout2

Yes

Yes

Yes

Yes

Yes

Yes

Virtual Templates for Protocol Translation

No

Yes

No

Yes

Yes

Yes

 WAN Optimization

ATM MIB Enhancements

No

No

No

No

No

No

PAD Enhancements

No

Yes

No

Yes

Yes

Yes

PAD Subaddressing

Yes

Yes

Yes

Yes

Yes

Yes

 WAN Services

Always On/Dynamic ISDN (AO/DI)

(3)

No

No

No

No

Yes

Yes

Bandwidth Allocation Control Protocol

Yes

Yes

Yes

Yes

Yes

Yes

Dialer Watch

(2)

Yes

Yes

Yes

Yes

Yes

Yes

Frame Relay Enhancements

Yes

Yes

Yes

Yes

Yes

Yes

Frame Relay MIB Extensions

Yes

Yes

Yes

Yes

Yes

Yes

Frame Relay Router ForeSight

Yes

Yes

Yes

Yes

Yes

Yes

ISDN Advice of Charge

Yes

Yes

Yes

Yes

Yes

Yes

ISDN Caller ID Callback

Yes

Yes

Yes

Yes

Yes

Yes

ISDN NFAS

Yes

Yes

Yes

Yes

Yes

Yes

Layer 2 Forwarding---Fast Switching

No

Yes

No

Yes

Yes

Yes

Leased Line ISDN at 128 kbps

No

No

No

No

No

No

MS Callback

(2)

Yes

Yes

Yes

Yes

Yes

Yes

Microsoft Point-to-Point Compression (MPPC)

(3)

Yes

Yes

Yes

Yes

Yes

Yes

Multiple ISDN Switch Types

(3)

Yes

Yes

Yes

Yes

Yes

Yes

National ISDN Switch Types for BRI and PRI Interfaces (NI2)

(3)

Yes

Yes

Yes

Yes

Yes

Yes

PPP over ATM

No

No

No

No

No

No

Stackable Home Gateway

(3)

No

Yes

No

Yes

Yes

Yes

Telnet Extensions for Dialout

Yes

Yes

Yes

Yes

Yes

Yes

X.25 Enhancements

Yes

Yes

Yes

Yes

Yes

Yes

X.25 on ISDN

Yes

Yes

Yes

Yes

Yes

Yes

X.25 Switching between PVCs and SVCs

Yes

Yes

Yes

Yes

Yes

Yes

X.28 Emulation

Yes

Yes

Yes

Yes

Yes

Yes

1The "In" column lists the Cisco IOS release that first introduces a feature.
2All platforms with integrated MICA modems will support dialout in future releases.

System Requirements

This section describes the following:

Memory Requirements

Table 5 lists the memory delivered by default and the available memory upgrades.


Table 5: Cisco AS5200 Memory and Upgrade Options
Type of Memory Default Upgrade Options

Flash

16 MB

8-MB to 16-MB (Dual Bank) upgrade: MEM-1X16-AS52

Boot Flash

8 MB

4-MB to 8-MB upgrade: MEM-8BF-52=

DRAM

8 MB

8-MB to 16-MB upgrade: MEM-16M-52

Shared DRAM

4 MB

4-MB to 8-MB upgrade: MEM-8S-52
4-MB to 16-MB upgrade: MEM-16S-52

Hardware Supported

The following LAN interfaces are supported on the Cisco AS5200:

The following WAN data rates are supported on the Cisco AS5200:

The following WAN interfaces are supported on the Cisco AS5200:

Software Compatibility

The feature packs described in these release notes contain Cisco IOS Release 11.3(6)T software images, some earlier images, and Router Software Loader (RSL) Version 7.2. Before running RSL, read the "Installing Software Images Using the RSL" section.

Determining Your Software Release

To view the version of Cisco IOS software that is running on your Cisco AS5200 access server, log in to the access server and enter the show version user EXEC command:

router> show version



 An output begins similar to the following. The Cisco IOS version appears in the second line. 


Cisco Internetwork Operating System Software 
IOS (tm) AS5200 (C5200-IS-L), Version 11.3(6)T, RELEASE SOFTWARE



 The output includes more information including processor revision numbers, memory amounts, hardware IDs, and partition information.


 Modem Code Installation

 
 If you are running Microsoft Windows 95 on a PC, we recommend using the RSL to download modem code. For detailed steps, refer to the RSL online help topic "Downloading Modem Files." If you are running Windows  NT, UNIX, or Macintosh, use a TFTP or RCP to download modem code. TFTP server instructions are in the document titled "Downloading Modem Code."


 Both RSL and TFTP instructions for downloading modem code are available at the follow URL:
http://www.cisco.com/public/sw-center/sw-access.shtml
Click  on the link "Cisco Channel Modem Software Upgrade."


 For complete information about firmware download, refer to "Installing 56K 12-Port Modules in Cisco  AS5200 Universal Access Servers," which is available at http://www.cisco.com  (click on Products & Ordering and then Documentation). The section "Decisions about Downloading 56K Modem Code" contains background information, and the section "Downloading Modem Code for Releases Requiring a Single File" contains download procedures for Cisco IOS Release 11.3(6)T. 


 See the sections "Cisco Connection Online" and "Documentation CD-ROM" for information on accessing customer documentation.


 Installation Notes

 
 This section provides solutions to problems you might encounter when using the RSL to load Cisco  IOS software on a router. It also describes special cases that might require you to use an alternative to the RSL.


 Installing Software Images Using the RSL


 This section describes some solutions to problems you might encounter when using the RSL. These solutions are additions to the RSL online help.


 Recovering From a Connection Error


 This installation tip provides a possible recovery solution if you are unable to connect to your access server or router. You can ignore this section if you are not experiencing a connection error.


 In some cases, you might receive the following error message while connecting to the target access server:


"Failed to configure the router to enable the Cisco IOS software image and configuration 
file upload and download operations. You may want to check the router to make sure that 
the selected interface exists."



 If you encounter this message, try increasing the Short Timeout value in the Options dialog box from the default 25 seconds, especially if one of the following situations applies:



Note Increasing the Short Timeout value might increase the time it takes for RSL to connect to the target access server.




 Restoring the Startup Configuration


 In some cases, RSL is unable to restore the startup configuration. If this happens, take the following steps:



Step 1	 Ensure that all cables are properly attached to both the access server and the PC.



Step 2	 Restart RSL and connect using the Preconfigured router option.



Step 3	 When asked if you want to overwrite the existing startup configuration file, choose no.



Step 4	 When asked if you want to continue, choose yes.



Step 5	 When the router is connected, select Download Router Configuration in the Router Software  Loader dialog box.



Step 6	 Select the appropriate file, and click the radio button beside Copy configuration to the router nonvolatile memory.


 The access server should now contain the startup configuration it had before the initial RSL connection. You can now exit RSL.



Note In the previous situation, the access server's configuration register (config-register 0xnnnn) is not restored. 




Note If you press Ctrl-Alt-Delete to terminate RSL, the access server's configuration and configuration register are not restored. However, in this case the configuration file is not deleted from the PC, so it can be restored using the previous steps.



 Helpful Hints


 The following information about RSL operations can help you with the installation process:



 Installing Software Images Using a TFTP Server Application


 We recommend using the Router Software Loader application to install the software images; however, the CD-ROM is designed to work with a PC running Microsoft Windows  95. For other operating systems, an alternative is available using a TFTP server application to install access server software. You can perform this procedure using a PC (running Microsoft Windows 95 or Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the copy tftp flash or copy rcp flash command to download the software to the access server.


 First, obtain a TFTP application or a remote copy protocol (rcp) application to set up your computer as a TFTP server or an rcp server. You can use the RSL or the TFTP server included on the feature pack CD-ROM to install the software only if you are using a PC running Windows 95. For other operating systems, a number of TFTP or rcp applications are available from independent software vendors or as shareware from public sources on the World Wide Web.


 Installation Process


 This section describes how to use TFTP on a PC to install the access server software on a PC. 



Note To use an RCP application, follow this same procedure, but substitute RCP for TFTP in the instructions; for example, use the copy rcp flash command instead of the copy tftp flash command.




Step 1	 Install any TFTP server application on the PC. (The PC application included on the feature pack CD-ROM is for Microsoft Windows 95 only.)



Step 2	 Launch the TFTP server application on the PC, usually by double-clicking the application icon or its .exe filename. 



Step 3	 Set up the PC as a TFTP server by using the TFTP server application setup or configuration facility.


 Most TFTP server applications include a setup facility that allows you to specify the PC as a server. For example, from the TFTP menu of one application, you can select Settings to display a panel that includes a check box beside the word Server. To configure the local PC as a server, click this check box. 


 The TFTP server also allows the selection of a "root" directory. You must select the directory in which the Cisco  IOS files reside, for example, d:\cpswinst\images.


Step 13, you remain connected to the access server. (If you use Telnet, you lose connection to the access server.)



  • Establish a Telnet session from the PC to the access server.
    




Step 5	 Connect your PC Ethernet port to the access server Ethernet port. Use an Ethernet crossover cable. 


    

    
Note Use straight-through cables if you are connecting via a 10BaseT hub or a 100BaseT hub.

    



 For systems without a LAN interface, make sure that the access server and the PC have IP connectivity through the available interface (that is, the access server and PC can ping each other with IP traffic).


    

    
Note We recommend that you back up the access server configuration before upgrading the access server software. 

    




Step 6	 Enter the following commands to enter privileged mode, change the config-reg to 0x2101, and reload:


    router> enable
    
Password: <password>
    
router# configure terminal
    
config-reg 0x2101
    
ctrl-Z
    
router# reload
    
 
    



 The access server will reload in bootstrap mode, which is necessary for copying images into Flash memory.



Step 7	 Enter the following commands to enter enable mode and copy the new software image from the PC (set up as a TFTP server) to the access server:


    (boot)> enable
    
Password: <password>
    
(boot)#
    



 (boot)# copy tftp flash


 In the next series of steps, you download the Cisco IOS Release 11.3 images that you want installed on your access server.



Step 8	 When prompted, enter the IP address of your PC, as in the following example:


 Address or name of remote host [255.255.255.255]? 172.16.1.1


 This is the IP address of your local PC, not that of the access server. 



Step 9	 When prompted, enter the filename of the Cisco IOS Release 11.3 image to be copied to the access server, as in the following example:


 Source file name? 80257306.bin


 This example specifies the DOS image name of the IP feature set for a Cisco  AS5200 access server, as listed in Table 1. 



Step 10	 In response to the prompt, enter the destination UNIX image filename, and press Enter.


 This is the name of the image file on the access server, not the full path name of the image on the CD-ROM attached to the PC. Refer to Table 2 in the section, "System Requirements" for the UNIX image filename.


    Destination file name [80257306.bin]? c5200-i-1.113-6.T
    
 
    




Step 11	 Enter yes in response to the prompt asking if you want to erase the existing image copy resident in the access server Flash memory before copying the new one:


 Erase flash device before writing? [confirm] yes


 The entire copying process takes several minutes and differs from network to network.


 During the transfer process, the software displays messages indicating that it has accessed the file you have specified and is loading it. 


 The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully. A checksum verification of the image occurs after the image is written to Flash memory. 



Step 12	 Enter the following commands to change the config-reg back to 0x2102. This will force the access server to reload to the image running from Flash memory.


    (boot)# configure terminal
    
config-reg 0x2102
    
(boot)(config)#
    
(boot)(config)# end
    
(boot)#
    
 
    
 
    




Step 13	 Enter the reload command to reload the access server:


    (boot)# reload
    



 


 After reload is complete, the access server should be running the desired Cisco  IOS image. Use the show  version command to verify.


 Documentation Updates

 
 Due to a production problem, many source-route bridging commands were omitted from the printed version of the Cisco IOS Software Command Summary (78-4746-xx, DOC-CIOSCS11.3=). For complete documentation of all source-route bridging commands, refer to the Bridging and IBM Networking Command Reference (78-4743-xx). You can also obtain the most current documentation on the Documentation CD-ROM or Cisco Connection Online (CCO).


 Related Documentation

 
 This section describes the documentation related to the Cisco AS5200, typically including hardware installation guides, software installation guides, Cisco IOS configuration and command references, system error messages, and feature modules that are updates to the Cisco IOS documentation set. Documentation is available as printed manuals or electronic documents, except for the feature modules that are available online only. 


 The most up-to-date documentation can be found on the Web via Cisco Connection Online (CCO) and on the latest Documentation CD-ROM. These electronic documents might contain updates and modifications made after the paper documents were printed. For information on CCO, refer to the "Cisco Connection Online" section later in this document. For more information on to the CD-ROM, refer to the "Documentation CD-ROM" section later in this document. 


 Hardware-Specific Documentation


 The following Cisco AS5200 documents are available: 


  • Cisco AS5200 Universal Access Server Software Configuration Guide
    

  • Cisco AS5200 Universal Access Server Installation Guide
    

  • Cisco AS5200 Manager Guide
    

  • Modem/Terminal Adapter Information
    

  • Regulatory compliance and safety information
    

  • Documentation for spare parts
    



 To access Cisco AS5200 documentation on CCO, follow this path:


 Products and Ordering: Cisco Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200.


 To access Cisco AS5200 documentation on the Documentation CD-ROM, follow this path:


 Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco  AS5200.


 Cisco IOS Software Documents


 Cisco IOS software documentation is listed below. Software documentation consists of the Cisco  IOS configuration guides and command references and also includes several supporting documents. These documents are shipped with your order in electronic form on the Documentation CD-ROM, unless you specifically ordered the printed version of the documents.


 The Cisco IOS configuration guides, command references, and chapter topics are as follows:


  




Books
Chapter Topics



  • Configuration Fundamentals Configuration Guide
    

  • Configuration Fundamentals Command Reference
    



 Configuration Fundamentals Overview


 Cisco IOS User Interfaces


 File Management


 Interface Configuration


 System Management




  • Network Protocols Configuration Guide, Part 1
    

  • Network Protocols Command Reference, Part 1
    



 IP Addressing


 IP Services


 IP Routing Protocols




  • Network Protocols Configuration Guide, Part 2
    

  • Network Protocols Command Reference, Part 2
    



 AppleTalk


 Novell IPX




  • Network Protocols Configuration Guide, Part 3
    

  • Network Protocols Command Reference, Part 3
    



 Apollo Domain


 Banyan VINES


 DECnet


 ISO CLNS


 XNS




  • Wide-Area Networking Configuration Guide
    

  • Wide-Area Networking Command Reference
    



 ATM


 Frame Relay


 SMDS


 X.25 and LAPB




  • Security Configuration Guide
    

  • Security Command Reference
    



 AAA Security Services


 Security Server Protocols


 Traffic Filtering


 Network Data Encryption


 Passwords and Privileges


 Neighbor Router Authentication


 IP Security Options




  • Dial Solutions Configuration Guide
    

  • Dial Solutions Command Reference
    



 Dial Business Solutions and Examples


 Dial-In Port Setup


 DDR and Dial Backup


 Remote Node and Terminal Service


 Cost-Control and Large-Scale Dial Solutions


 VPDN




  • Cisco IOS Switching Services Configuration Guide
    

  • Cisco IOS Switching Services Command Reference
    



 Switching Paths for IP Networks


 Fast Switching


 Autonomous Switching


 NetFlow Switching


 Optimum Switching


 Virtual LAN (VLAN) Switching and Routing


 Inter-Switch Link Protocol Encapsulation


 IEEE 802.10 Encapsulation


 LAN Emulation




  • Bridging and IBM Networking Configuration Guide
    

  • Bridging and IBM Networking Command Reference
    



 Transparent Bridging


 Source-Route Bridging


 Remote Source-Route Bridging


 DLSw+


 STUN and BSTUN


 LLC2 and SDLC


 IBM Network Media Translation


 DSPU and SNA Service Point


 SNA Frame Relay Access Support


 APPN


 NCIA Client/Server Topologies


 IBM Channel Attach




  • Cisco IOS Software Command Summary
    

  • Dial Solutions Quick Configuration Guide
    

  • System Error Messages
    

  • Debug Command Reference
    



 















Note The Cisco Management Information Base (MIB) User Quick Reference publication is no longer being published. For the latest list of MIBs supported by Cisco, see the Cisco Network Management Toolkit on Cisco Connection Online. On CCO, go to Software and Support: Software Center: Network Management Products: Cisco Network Management Toolkit: Cisco MIBs.



 Service and Support

 
 For service and support for a product purchased from a reseller, contact the reseller. Resellers offer a wide variety of Cisco service and support programs, which are described in the section "Service and Support" in the information packet that shipped with your product.



Note If you purchased your product from a reseller, you can access CCO as a guest. CCO is Cisco Systems' primary real-time support channel. Your reseller offers programs that include direct access to CCO services.



 For service and support for a product purchased directly from Cisco, use CCO.


 Software Configuration Tips on the Cisco TAC Home Page


 The following URL contains links to access helpful tips on configuring your Cisco products:


 http://www.cisco.com/kobayashi/serv_tips.shtml
  

 This URL is subject to change without notice. If it changes, point your web browser to http://www.cisco.com/,  and follow this path: Software & Support, Technical Tips (button on left margin).


 "Hot Tips" are popular tips and hints gathered from the Cisco Technical Assistance Center (TAC). Most of these documents are available from the TAC FAX-on-demand service. To access FAX-on-demand and receive documents at your FAX machine from the USA, call 888-50-CISCO (888-502-4726). From other areas, call 415-596-4408.


 The following sections are provided from the Technical Tips page:


  • Field Notices---Designed to provide notification of any critical issues regarding Cisco products. These include problem descriptions, safety or security issues, and hardware defects.
    

  • Hardware---Technical Tips related to specific hardware platforms.
    

  • Internetworking Features---Tips on using and deploying Cisco IOS software features and services.
    

  • Sample Configurations---Actual configuration examples complete with topology and annotations.
    

  • Software Products---such as MultiNet & Cisco Suite 100, Network Management, and Cisco IOS Software Bulletins.
    

  • Special Collections---Other Helpful Documents, Frequently Asked Questions, Security Advisories, References & RFCs, and Case Studies.
    



 Cisco Connection Online

 
 Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.


 Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.


 CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.


 You can access CCO in the following ways:



 For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.



Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800  553-2447, 408  526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800  553-6387, 408  526-7208, or cs-rep@cisco.com.



 Documentation CD-ROM 

 
 Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com,  http://www-china.cisco.com,  or http://www-europe.cisco.com.
  

 If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.








Copyright 1989-1998 
 © 
Cisco Systems Inc.

InfoBlast Homepage