April 20, 1998
These release notes discuss the Cisco IOS Release 11.3(2)T feature packs for Cisco AS5200 access servers. These are the product numbers for the supported features packs:
These release notes discuss the following topics:
This section explains the following:
The heart of a Cisco IOS software feature pack is a CD-ROM that contains a software image and Router Software Loader (RSL), a Windows 95 application that loads the image onto the access server/router. Each Cisco IOS Release 11.3 feature pack CD-ROM contains one feature set. For users without Windows 95, images can also be loaded with a Trivial File Transfer Protocol (TFTP) server application, as explained in these release notes.
Each Cisco IOS Release 11.3 software feature pack box contains the following:
This section includes two tables:
You can use Table 1 to identify the memory required for your configuration based on the image you run. You can then check this against Table 2 to determine how much memory is available on the access server as the factory default and the upgrades that you can obtain to satisfy your requirements.
| Model No. | CD-ROM Title | Image Included and UNIX Image Name | DOS Image Name | Flash Memory Req'd | Main Memory Req'd | Boot Flash Memory Req'd | Shared Memory Req'd | RSL Installer Description |
|---|---|---|---|---|---|---|---|---|
| CD52-C-11.3= | Cisco AS5200 IP Feature Pack Release 11.3(2)T | IP
c5200-i-l.113-2.T | 80257302 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 IP feature set 11.3(2)T |
CD52-CP-11.3= | Cisco AS5200 | IP Plus c5200-is-l.113-2.T | 80257002 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 |
CD52-B-11.3= | Cisco AS5200 | Desktop c5200-d-l.113-2.T | 80257402 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 Desktop feature set 11.3(2)T |
CD52-BP-11.3= | Cisco AS5200 | Desktop Plus c5200-ds-l.113-2.T | 80257102 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 Desktop Plus feature set 11.3(2)T |
CD52-A-11.3= | Cisco AS5200 | Enterprise c5200-j-l.113-2.T | 80257202 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 Enterprise feature set 11.3(2)T |
CD52-AP-11.3= | Cisco AS5200 | Enterprise Plus c5200-js-l.113-2.T | 80256902 |
16 MB |
8 MB |
8 MB |
4 MB | Cisco AS5200 Enterprise Plus feature set 11.3(2)T |
| Type of Memory | Default | Upgrade Options |
|---|---|---|
| Flash | 16 MB | 8-MB to 16-MB (Dual Bank) upgrade: MEM-1X16-AS52 |
| Flash Bootflash | 8 MB | 4-MB to 8-MB upgrade: MEM-8BF-52= |
| DRAM | 8 MB | 8-MB to 16-MB upgrade: MEM-16M-52 |
| Shared DRAM | 4 MB | 4-MB to 8-MB upgrade: MEM-8S-52 4-MB to 16-MB upgrade: MEM-16M-52 |
The Cisco IOS software is packaged into "feature sets" (also called "software images"). There are many different feature sets available, and each feature set contains a specific subset of Cisco IOS features. The feature set matrix is used to see the overall feature set organization.
The feature set matrix (see Table 3) shows the new feature set organization and lists which feature sets are available on the Cisco AS5200 for Cisco IOS Release 11.3(2)T. The matrix uses the following symbols:
| Feature Set Matrix Symbol | Description |
|---|---|
| Basic | This feature is offered in the basic feature set. |
| Plus | This feature is offered in the Plus feature set |
| Encrypt | This feature is offered in the encryption feature sets, which consist of 40-bit (Plus 40) or 56-bit (Plus 56) data encryption feature sets. |
| Standard Feature Sets | Cisco AS5200 Access Servers |
|---|---|
| IP | Basic, Plus |
| Desktop (IP/IPX/AppleTalk/DEC) | Basic, Plus |
| Enterprise | Basic, Plus |
Cisco IOS images with strong encryption (including but not limited to 56-bit DES) are subject to U.S. Government export controls, and have a limited distribution. Images to be installed outside the U.S. require an export license. Customer orders might be denied or subject to delay due to U.S. Government regulations. Contact your sales representative or distributor for more information, or send e-mail to export@cisco.com.
To determine what features are available with each feature set, see Table 4. The table summarizes what features you can use when running a specific feature set on the Cisco AS5200 access server for Cisco IOS Release 11.3(2)T. The feature set table uses the following symbols:
| Feature Set Table Symbol | Description |
|---|---|
| Basic | This feature is offered in the feature set. |
| -- | This feature is not offered in the feature set. |
| Plus | This feature is offered in the Plus feature set |
| Encrypt | This feature is offered in the Encryption feature sets, which consist of 40-bit (Plus 40) or 56-bit (Plus 56) data encryption feature sets. |
| Features | IP Routing | Desktop (IP/IPX/AppleTalk/DEC) | Enterprise |
|---|---|---|---|
| LAN Support | |||
Apollo Domain | -- | -- | Yes |
| AppleTalk 1 and 21 | -- | Yes | Yes |
Banyan VINES | -- | -- | Yes |
Concurrent routing and bridging (CRB) | Yes | Yes | Yes |
DECnet IV | -- | Yes | Yes |
DECnet V | -- | -- | Yes |
GRE | Yes | Yes | Yes |
| Integrated routing and bridging (IRB)2 | Yes | Yes | Yes |
IP | Yes | Yes | Yes |
LAN extension host | Yes | Yes | Yes |
Multiring | Yes | Yes | Yes |
| Novell IPX3 | -- | Yes | Yes |
OSI | -- | -- | Yes |
Source-route bridging (SRB) | -- | -- | Yes |
Transparent and translational bridging | Yes | Yes | Yes |
XNS | -- | -- | Yes |
| WAN Services | |||
Combinet Packet Protocol (CPP) | Yes | Yes | Yes |
Dialer profiles | Yes | Yes | Yes |
Frame Relay | Yes | Yes | Yes |
Frame Relay SVC Support (DTE) | -- | -- | Yes |
Frame Relay traffic shaping | Yes | Yes | Yes |
Half bridge/half router for CPP and PPP | Yes | Yes | Yes |
HDLC | Yes | Yes | Yes |
IPXWAN 2.0 | -- | Yes | Yes |
| ISDN4 | Yes | Yes | Yes |
Multichassis Multilink PPP (MMP) | -- | -- | Yes |
| PPP5 | Yes | Yes | Yes |
SMDS | Yes | Yes | Yes |
Switched 56 | Yes | Yes | Yes |
Virtual Private Dial-up Network (VPDN) | -- | Yes | Yes |
| X.256 | Yes | Yes | Yes |
| WAN Optimization | |||
Bandwidth-on-demand | Yes | Yes | Yes |
Custom and priority queuing | Yes | Yes | Yes |
Dial backup | Yes | Yes | Yes |
Dial-on-demand | Yes | Yes | Yes |
| Header7, link and payload compression8 | Yes | Yes | Yes |
Snapshot routing | Yes | Yes | Yes |
Weighted fair queuing | Yes | Yes | Yes |
| IP Routing | |||
BGP | Yes | Yes | Yes |
| BGP49 | Yes | Yes | Yes |
EGP | Yes | Yes | Yes |
Enhanced IGRP | Yes | Yes | Yes |
Enhanced IGRP Optimizations | Yes | Yes | Yes |
ES-IS | -- | -- | Yes |
IGRP | Yes | Yes | Yes |
IS-IS | -- | -- | Yes |
Named IP Access Control List | Yes | Yes | Yes |
Network Address Translation (NAT) | Plus | Plus | Plus |
NHRP | Yes | Yes | Yes |
On Demand Routing (ODR) | Yes | Yes | Yes |
OSPF | Yes | Yes | Yes |
OSPF Not-So-Stubby-Areas (NSSA) | Yes | Yes | Yes |
OSPF On Demand Circuit (RFC 1793) | Yes | Yes | Yes |
PIM | Yes | Yes | Yes |
Policy-based routing | Yes | Yes | Yes |
RIP | Yes | Yes | Yes |
RIP Version 2 | Yes | Yes | Yes |
| Other Routing | |||
AURP | -- | Yes | Yes |
IPX RIP | -- | Yes | Yes |
NLSP | -- | Yes | Yes |
RTMP | -- | Yes | Yes |
SMRP | -- | Yes | Yes |
SRTP | -- | -- | Yes |
| Multimedia and Quality of Service | |||
Generic traffic shaping | Yes | Yes | Yes |
Random Early Detection (RED) | Yes | Yes | Yes |
Resource Reservation Protocol (RSVP) | Yes | Yes | Yes |
| Management | |||
AutoInstall | Yes | Yes | Yes |
Automatic modem configuration | Yes | Yes | Yes |
HTTP Server | Yes | Yes | Yes |
Modem Management | Plus | Plus | Plus |
| RMON events and alarms10 | Yes | Yes | Yes |
RMON full | Plus | Plus | Plus |
SNMP | Yes | Yes | Yes |
Telnet | Yes | Yes | Yes |
| Security | |||
Access lists | Yes | Yes | Yes |
Access security | Yes | Yes | Yes |
Extended access lists | Yes | Yes | Yes |
Kerberized login | -- | -- | Yes |
Kerberos V client support | -- | -- | Yes |
Lock and key | Yes | Yes | Yes |
MAC security for hubs | Yes | Yes | Yes |
MD5 routing authentication | Yes | Yes | Yes |
RADIUS | Yes | Yes | Yes |
| TACACS+11 | Yes | Yes | Yes |
| IBM Support | |||
APPN | -- | -- | -- |
BAN for SNA Frame Relay support | Plus | Plus | Yes |
Bisync | Plus | Plus | Yes |
Caching and filtering | Plus | Plus | Yes |
| DLSw+ 12 | Plus | Plus | Yes |
Downstream PU concentration (DSPU) | Plus | Plus | Yes |
Frame Relay SNA support (RFC 1490) | Plus | Plus | Yes |
Native Client Interface Architecture (NCIA) Server | Plus | Plus | Yes |
NetView Native Service Point | Plus | Plus | Yes |
QLLC | Plus | Plus | Yes |
Response Time Reporter (RTR) | Plus | Plus | Yes |
SDLC integration | Plus | Plus | Yes |
DLSw (RFC 1795) | Plus | Plus | Yes |
SDLC transport (STUN) | Plus | Plus | Yes |
SDLC-to-LAN conversion (SDLLC) | Plus | Plus | Yes |
SNA and NetBIOS WAN optimization | Plus | Plus | Yes |
| SRB/RSRB13 | Plus | Plus | Yes |
SRT | Plus | Plus | Yes |
TG/COS | -- | -- | Yes |
TN3270 | -- | -- | Yes |
| Protocol Translation | |||
LAT | -- | -- | Yes |
Rlogin | -- | -- | Yes |
| Remote Node14 | |||
ARAP 1.0/2.0 | -- | Yes | Yes |
Asynchronous master interfaces | Yes | Yes | Yes |
ATCP | -- | Yes | Yes |
CPPP | Yes | Yes | Yes |
CSLIP | Yes | Yes | Yes |
DHCP | Yes | Yes | Yes |
IP pooling | Yes | Yes | Yes |
IPX and ARAP on virtual async interfaces | -- | -- | Yes |
IPXCP | -- | Yes | Yes |
MacIP | -- | Yes | Yes |
NASI | -- | -- | Yes |
NetBEUI over PPP | Yes | Yes | Yes |
SLIP | Yes | Yes | Yes |
| Terminal Services15 | |||
| LAT15 | -- | -- | Yes |
Rlogin | Yes | Yes | Yes |
Telnet | Yes | Yes | Yes |
TN3270 | -- | -- | Yes |
X.25 PAD | Yes | Yes | Yes |
Xremote | -- | -- | Yes |
If you are running Microsoft Windows 95 on a PC, we recommend using the RSL to download modem code. For detailed steps, refer to the RSL online help topic "Downloading Modem Files." If you are running Windows NT, UNIX, or Macintosh, use a TFTP or RCP to download modem code. TFTP server instructions are in the document titled "Another Way to Download Modem Code."
Both RSL and TFTP instructions for downloading modem code are available at the follow URL:
http://www.cisco.com/public/sw-center/sw-access.shtml
Click on the link "Cisco Channel Modem Software Upgrade."
For complete information about firmware download, refer to "Installing 56K 12-Port Modules in Cisco AS5200 Universal Access Servers," which is available at http://www.cisco.com. The section "Decisions about Downloading 56K Modem Code" contains background information, and the section "Downloading Modem Code for Releases Requiring a Single File" contains download procedures for Cisco IOS Release 11.3(2)T.
See the sections "Cisco Connection Online" and "Documentation CD-ROM" for information on accessing customer documentation.
The Router Software Loader application contained on the feature pack CD-ROM is designed to work with a PC running Microsoft Windows 95. Refer to the booklet included with the CD-ROM for instructions to install the software images.
This section describes several solutions to problems you might encounter when using RSL. These solutions are additions to the RSL online help.
This installation tip provides a possible recovery solution in the event that you are unable to connect to your access server or router. You can skip this section unless you are experiencing a connection error.
In some cases, you might receive the following error message while connecting to the target access server:
"Failed to configure the router to enable the Cisco IOS software image and configuration file upload and download operations. You may want to check the router to make sure that the selected interface exists."
If you encounter this message, try increasing the Short Timeout value, which is set to 25 seconds, in the Options dialog box, especially if one of the following situations applies:
In some cases, RSL is unable to restore the startup configuration. If this happens, take the following steps:
Step 1 Ensure that all cables are properly attached to both the access server and the PC.
Step 2 Restart RSL and connect using the Preconfigured router option.
Step 3 When asked if you want to overwrite the existing startup configuration file, choose NO.
Step 4 When asked if you want to continue, choose YES.
Step 5 When connected, select Download Router Configuration in the Router Software Loader dialog box.
Step 6 Select the appropriate file, and click Copy configuration to the router's nonvolatile memory.
The access server should now contain the startup configuration it had before the initial RSL connection. You can now exit RSL.
The following information about RSL operations can help you with the installation process:
The Router Software Loader application contained on the feature pack CD-ROM is designed to work with a PC running Microsoft Windows 95. The booklet included with the CD-ROM explains how to perform this simple and recommended install process. However, an alternative is available using a TFTP server application to install router software.
This section explains how to use a TFTP server application as an alternative to using the RSL to install the router software from the CD-ROM. You can perform this procedure using a PC (running Microsoft Windows 95 or Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the copy tftp flash or copy rcp flash command to download the software to the access server.
First obtain a TFTP application or a remote copy protocol (RCP) application to set up your computer as a TFTP server or an RCP server. You can use the RSL or the TFTP server included on the feature pack CD-ROM to install the software only if you are using a PC running Windows 95. For other operating systems, a number of TFTP or RCP applications are available from independent software vendors or as shareware from public sources on the World Wide Web.
This section describes how to use TFTP on a PC to install the access server software.
Step 1 Install any TFTP server application on the PC. (The PC application included on the feature pack CD-ROM is for Microsoft Windows 95 only.)
Step 2 Launch the TFTP server application on the PC, usually by double-clicking the application icon or its .exe filename.
Step 3 Set up the PC as a TFTP server by using the TFTP server application setup or configuration facility.
Most TFTP server applications include a setup facility that allows you to specify the PC as a server. For example, from the TFTP menu of one application, you can select Settings to display a panel that includes a check box beside the word Server. To configure the local PC as a server, click this check box.
The TFTP server also allows the selection of a "root" directory. You must select the directory in which the Cisco IOS files reside, for example, d:\cpswinst\images.
 to the access server by using one of these methods:</P>
<UL>
<P><LI>Connect the PC com port to the access server console port.</P>
</UL>
<DL>
<DT><DD>This is the recommended method.When you reload the access server with the new image in <A HREF=)
Step 13, you remain connected to the access server. (If you use Telnet, you lose connection to the access server.)
Step 5 Connect your PC Ethernet port to the access server Ethernet port. Use an Ethernet crossover cable.
For systems without a LAN interface, make sure that the access server and the PC have IP connectivity through the available interface (that is, the access server and PC can ping each other with IP traffic).
Step 6 Enter the following commands to enter privileged mode, change the config-reg to 0x2101, and reload:
The access server will reload in bootstrap mode, which is necessary for copying images into Flash memory.
Step 7 Enter the following commands to enter enable mode and copy the new software image from the PC (set up as a TFTP server) to the access server:
(boot)# copy tftp flash
In the next series of steps, you download the Cisco IOS Release 11.3 images that you want installed on your access server.
Step 8 When prompted, enter the IP address of your PC, as in the following example:
Address or name of remote host [255.255.255.255]? 172.16.1.1
This is the IP address of your local PC, not that of the access server.
Step 9 When prompted, enter the filename of the Cisco IOS Release 11.3 image to be copied to the access server, as in the following example:
Source file name? 80257302.bin
This example specifies the DOS image name of the IP feature set for a Cisco AS5200 access server, as listed in Table 1.
Step 10 In response to the prompt, enter the destination UNIX image filename, and press Enter.
This is the name of the image file on the access server, not the full path name of the image on the CD-ROM attached to the PC. Refer to Table 1 in the section, "Cisco Feature Packs and Memory Requirements" for the UNIX image filename.
Destination file name [80257302.bin]? c5200-i-1.113-2.T
Step 11 Enter yes in response to the prompt asking if you want to erase the existing image copy resident in the access server Flash memory before copying the new one:
Erase flash device before writing? [confirm] yes
The entire copying process takes several minutes and differs from network to network.
During the transfer process, the software displays messages indicating that it has accessed the file you have specified and is loading it.
The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully. A checksum verification of the image occurs after the image is written to Flash memory.
Step 12 Enter the following commands to change the config-reg back to 0x2102. This will force the access server to reload to the image running from Flash memory.
Step 13 Enter the reload command to reload the access server:
(boot)# reload
After reload is complete, the access server should be running the desired Cisco IOS image. Use the show version command to verify.
All documents mentioned in this section are available as printed manuals or electronic documents. (See the section "Online Navigation" for more information on accessing electronic documentation.)
The following documentation is related to these release notes:
The following documents are specific to the Cisco AS5200 access server:
The following documents apply to the Cisco AS5200 access server:
For details about the features introduced in these release notes, refer to the Feature Guide for
Cisco IOS Release 11.3 T.
The Cisco IOS configuration guides, command references, and chapter topics are as follows:
| Books | Chapter Topics |
|---|---|
|
Access Server and Router Product Overview User Interface System Images and Configuration Files Using ClickStart, AutoInstall, and Setup Interfaces System Management |
|
Network Access Security Terminal Access Security Accounting and Billing Traffic Filters Controlling Router Access Network Data Encryption with Router Authentication |
|
Terminal Lines and Modem Support Network Connections AppleTalk Remote Access SLIP and PPP XRemote LAT Telnet TN3270 Protocol Translation Configuring Modem Support and Chat Scripts X.3 PAD Regular Expressions |
|
ATM Dial-on-Demand Routing (DDR) Frame Relay ISDN LANE PPP for Wide-Area Networking SMDS X.25 and LAPB |
|
IP IP Routing |
|
AppleTalk Novell IPX |
|
Apollo Domain Banyan VINES DECnet ISO CLNS XNS |
|
Transparent Bridging Source-Route Bridging Remote Source-Route Bridging DLSw+ STUN and BSTUN LLC2 and SDLC IBM Network Media Translation DSPU and SNA Service Point Support SNA Frame Relay Access Support APPN NCIA Client/Server Topologies IBM Channel Attach |
|
|
The following URL contains links to access helpful tips to configure your Cisco products:
http://www.cisco.com/kobayashi/serv_tips.shtml
This URL is subject to change without notice. If it does change, point your web browser to http://www.cisco.com/ and follow this path: Software & Support, Technical Tips (button on left margin).
"Hot Tips" are popular tips and hints gathered from Cisco's Technical Assistance Center (TAC). Most of these documents are also available from the TAC's Fax-on-Demand service. To access Fax-on-Demand and receive documents at your fax machine, call 888-50-CISCO (888-502-4726). From international areas, call 415-596-4408.
The following sections are provided from the Technical Tips page:
You can access Cisco IOS software documentation, such as printed manuals and configuration notes, either at Cisco Connection Online (CCO) on the World Wide Web or on the Cisco Documentation CD-ROM.
Additional information about CCO and the Documentation CD-ROM is in the sections "Cisco Connection Online" and "Documentation CD-ROM" at the end of these release notes.
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to the Cisco customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM is available as a single unit or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.