Release Notes for Cisco IOS Release 11.1--- CiscoPro CPA1000 Series Routers
October 14, 1996
These release notes identify the Cisco Internetwork Operating System (Cisco IOS) Release 11.1 feature sets for CiscoPro CPA1000 series routers. Product numbers for the supported feature sets are as follows:
These release notes include tables that identify feature packs and tables that show the specific features comprising available feature sets for each supported CiscoPro router. These release notes also help you navigate the electronic documentation directly to the Cisco IOS Release 11.1 documentation for CiscoPro products. The CiscoPro Software Installer, delivered on the same CD-ROM as the Cisco IOS feature sets, is designed to work from a PC running Microsoft Windows 95. These release notes also describe how to install the router software feature sets using a PC running Microsoft Windows 3.1.
These release notes contain the following sections:
CiscoPro Feature Pack Descriptions
This section describes the CiscoPro feature packs, listing the software feature sets comprising each set. You can use this information to identify your feature pack set in conjunction with the corresponding information provided in the tables in the section "Installation Tips," page 4. Tables in that section identify which features that are supported for a feature set on a specific platform.
Table 1 identifies each feature pack as specified on the label of the CD containing the router software. It also lists the feature sets comprising the feature pack, giving the DOS and UNIX filenames of the images. The table provides a brief description of each feature set and the router platform on which the feature set runs.
Table 1 : CiscoPro Feature Pack Feature Set Image Filenames
| Feature Sets Included | DOS Filename | UNIX Filename | Description |
|---|---|---|---|
| CPA1000 IP Feature Pack Release 11.1 (model number CPASW10-A-11.1=) | |||
| IP 1003/1004 | JE11150N | cpa1003-y-mz.111-5 | IP feature set for CPA1003 and CPA1004 routers |
| IP 1005 sync | KE11150N | cpa1005-xy-mz.111-5 | IP feature set for CPA1005 routers |
| IP 1005 async | KA11150N | cpa1005-qy-mz.111-5 | IP asynchronous feature set for CPA1005 routers |
| CPA1000 IP/AppleTalk Feature Pack Release 11.1 (model number CPASW10-C-11.1=) | |||
| IP/AT 1003/1004 | Jl11150N | cpa1003-by-mz.111-5 | IP/AppleTalk feature set for CPA1003 and CPA1004 routers |
| IP/AT 1005 | Kl11150N | cpa1005-by-mz.111-5 | IP/AppleTalk feature set for CPA1005 routers |
| CPA1000 IP/IPX Feature Pack Release 11.1 (model number CPASW10-D-11.1=) | |||
| IP/IPX 1003/1004 | JN11150N | cpa1003-ny-mz.111-5 | IP/IPX feature set for CPA1003 and CPA1004 routers |
| IP/IPX 1005 sync | KN11150N | cpa1005-ny-mz.111-5 | IP/IPX synchronous feature set for CPA1005 routers |
| IP/IPX 1005 async | KU11150N | cpa1005-nqy-mz.111-5 | IP/IPX asynchronous feature set for CPA1005 routers |
Memory Requirements and Recommendations
This section includes two tables: Table 2 identifies the memory required to run each feature set on a CiscoPro CPA1000 series router platform; Table 3 describes the memory delivered by default for a particular router series and the memory upgrades available for that series.
You can use Table 2 to identify the memory required for your configuration based on the image you run. You can then check this against Table 3 to determine how much memory is available on the router as the factory default and the upgrades that you can obtain to satisfy your requirements.
Table 2 : CiscoPro CPA1000 Series Feature Set Memory Requirements
| Feature Set | Description | Flash Memory Requirements | DRAM Memory
Requirements |
|---|---|---|---|
| CPA1000 IP Feature Pack Release 11.1 | |||
| IP 1003/1004 | IP feature set for CPA1003 and CPA1004 routers | 2 MB (default) | 4 MB (default) |
| IP 1005 sync | IP synchronous feature set for CPA1005 routers | 2 MB (default) | 4 MB (default) |
| IP 1005 async | IP asynchronous feature set for CPA1005 routers | 2 MB (default) | 4 MB (default) |
| CPA1000 IP/AppleTalk Feature Pack Release 11.1 | |||
| IP/AT 1003/1004 | IP/AppleTalk feature set for CPA1003 and CPA1004 routers | 2 MB (default) | 4 MB (default) |
| IP/AT 1005 | IP/AppleTalk feature set for CPA1005 routers | 2 MB (default) | 4 MB (default) |
| CPA1000 IP/IPX Feature Pack Release 11.1 | |||
| IP/IPX 1003/1004 | IP/IPX feature set for CPA1003 and CPA1004 routers | 2 MB (default) | 4 MB (default) |
| IP/IPX 1005 sync | IP/IPX synchronous feature set for CPA1005 routers | 2 MB (default)
|
4 MB (default) |
| IP/IPX 1005 async | IP/IPX asynchronous feature set for CPA1005 routers | 2 MB (default)
|
4 MB (default) |
Table 3 shows the amount of both Flash and main memory delivered by default on a CiscoPro CPA1000 series router. It also lists the available memory upgrades.
Table 3 : CiscoPro Access Default and Memory Upgrade Options
| Default | Upgrade Options |
|---|---|
| 2 MB (Flash) | 4-MB upgrade: CPA010-MEM4F= |
| 4 MB (DRAM) | 8-MB upgrade: CPA010-MEM8D= |
This section describes several solutions to problems you might encounter when using the CiscoPro Software Installer. These solutions are additions to the installer's online help.
router#
config t
router(config)#
config 0x2
router(config)#
exit
router#
reload
Cisco IOS Release 11.1 Feature Sets for CiscoPro Products
This section identifies specific features, within a category of features, supported on a particular router platform. Features marked with "Yes" are supported on the platform; features marked with "--" are not supported. You can use the information given in the tables provided in this section in conjunction with the information provided in the section "CiscoPro Feature Pack Descriptions," page 2, to determine which features a particular feature set supports on a given platform.
Table 4 : Cisco IOS Release 11.1 Feature Sets for CiscoPro CPA1003 and CPA1004 Routers
| Feature | IP1 | IP/IPX1 | IP/AT1 |
|---|---|---|---|
| LAN Support | |||
| IP | Yes | Yes | Yes |
| GRE | Yes | Yes | Yes |
| IPX | -- | Yes | -- |
| AppleTalk Versions 1 and 2 | - | -- | Yes |
| DECnet IV | -- | -- | -- |
| DECnet V | -- | -- | -- |
| OSI CLNS | -- | -- | -- |
| Banyan VINES | -- | -- | -- |
| XNS | -- | -- | -- |
| Apollo Domain | -- | -- | -- |
| Bridging | |||
| Transparent and
translational |
Yes | Yes | Yes |
| Concurrent routing and bridging | -- | -- | -- |
| LAN extension,
host |
-- | -- | -- |
| SRB | -- | -- | -- |
| SRT | -- | -- | -- |
| SR/TLB | -- | -- | -- |
| Multiring | -- | -- | -- |
| Wide Area Support: Services | |||
| HDLC | Yes | Yes | Yes |
| PPP | Yes | Yes | Yes |
| Frame Relay | -- | -- | -- |
| ISDN | Yes | Yes | Yes |
| X.25 | -- | -- | -- |
| LAP-B | -- | -- | -- |
| SMDS | -- | -- | -- |
| SW56 | -- | -- | -- |
| IPXWAN 2.0 | -- | -- | -- |
| ATM-DXI | -- | -- | -- |
| Wide Area Support: Optimization | |||
| Compression | Yes | Yes | Yes |
| Dial-on-demand | Yes | Yes | Yes |
| Bandwidth-on-demand | Yes | Yes | Yes |
| Dial backup | Yes | Yes | Yes |
| Custom queuing | Yes | Yes | Yes |
| Priority queuing | Yes | Yes | Yes |
| Weighted fair queuing | Yes | Yes | Yes |
| Snapshot routing | Yes | Yes | Yes |
| IP: Host Services | |||
| Telnet | Yes | Yes | Yes |
| ARP | Yes | Yes | Yes |
| FTP | Yes | Yes | Yes |
| NTP | -- | -- | -- |
| IP: Routing Protocols | |||
| RIP v1, v2 | Yes | Yes | Yes |
| IGRP | Yes | Yes | Yes |
| Enhanced IGRP | Yes | Yes | Yes |
| OSPF | -- | -- | -- |
| BGP | -- | -- | -- |
| EGP | -- | -- | -- |
| ES-IS | -- | -- | -- |
| IS-IS | -- | -- | -- |
| NHRP | -- | -- | -- |
| PIM | -- | -- | -- |
| IP multicast | -- | -- | -- |
| Policy-based routing | -- | -- | -- |
| HSRP | -- | -- | -- |
| Other Routing | |||
| IPX RIP | -- | Yes | -- |
| IPX NLSP | -- | -- | -- |
| AT RTMP | -- | -- | Yes |
| AT AURP | -- | -- | -- |
| AT SMRP | -- | -- | -- |
| VINES SRTP | -- | -- | -- |
| IBM Support | |||
| SRB/RSRB | -- | -- | -- |
| DLSw+ | -- | -- | -- |
| SNA and NetBios WAN
optimization |
-- | -- | -- |
| SDLC | -- | -- | -- |
| SDLLC | -- | -- | -- |
| STUN | -- | -- | -- |
| QLLC | -- | -- | -- |
| Bisync | -- | -- | -- |
| FR SNA support - RFC 1490 | -- | -- | -- |
| BAN for SNA FR support | -- | -- | -- |
| TG/COS | -- | -- | -- |
| DSPU | -- | -- | -- |
| APPN | -- | -- | -- |
| Management | |||
| AutoInstall | -- | -- | -- |
| CDP | Yes | Yes | Yes |
| SNMP | Yes | Yes | Yes |
| RMON: events & alarms | -- | -- | -- |
| RMON: 9 groups | -- | -- | -- |
| Auto modem config. | -- | -- | -- |
| NetView native service point | -- | -- | -- |
| Security | |||
| Access lists | Yes | Yes | Yes |
| Access security | Yes | Yes | Yes |
| TACACS+ | -- | -- | -- |
| Radius | -- | -- | -- |
| MD5 routing authentication | -- | -- | -- |
| Lock and key | Yes | Yes | Yes |
| MAC security for hublets | -- | -- | -- |
| Kerberized login | -- | -- | -- |
| Protocol Translation | |||
| Telnet | -- | -- | -- |
| rlogin | -- | -- | -- |
| LAT | -- | -- | -- |
| TN3270 | -- | -- | -- |
| X.25 | -- | -- | -- |
| PPP | -- | -- | -- |
| Remote Node: Access Protocols | |||
| SLIP | --- | --- | --- |
| CSLIP | --- | --- | --- |
| PPP | --- | --- | --- |
| CPPP | --- | --- | --- |
| NetBEUI over PPP | -- | -- | -- |
| IPXCP | -- | -- | -- |
| NASI | -- | -- | -- |
| ATCP | -- | -- | -- |
| ARAP 1.0/2.0 | -- | -- | -- |
| Remote Node: Access Services | |||
| DHCP | -- | -- | -- |
| IP address pooling | -- | -- | -- |
| Async master interfaces | -- | -- | -- |
| MacIP | -- | -- | -- |
| IPX on virtual async
interfaces |
-- | -- | -- |
| ARAP on virtual async
interfaces |
-- | -- | -- |
| LPD | -- | -- | -- |
| Menus | -- | -- | -- |
| CHAT scripts | -- | -- | -- |
| Terminal Services | |||
| Telnet | -- | -- | -- |
| rlogin | -- | -- | -- |
| X.25 PAD | -- | -- | -- |
| Mop | -- | -- | -- |
| LAT | -- | -- | -- |
| TN3270 | -- | -- | -- |
| XRemote | -- | -- | -- |
| Interface Support: LAN | |||
| Ethernet AUI | -- | -- | -- |
| Ethernet 10BaseT | Yes | Yes | Yes |
| 4/16-Mbps TRing | -- | -- | -- |
| FDDI | -- | -- | -- |
| Interface Support: WAN | |||
| Sync. serial | -- | -- | -- |
| Async. serial | -- | -- | -- |
| ISDN BRI | Yes | Yes | Yes |
| Channelized T1/E1/ISDN PRI | -- | -- | -- |
| G.703 | -- | -- | -- |
| ATM | -- | -- | -- |
| HSSI | -- | -- | -- |
Table 5 : Cisco IOS Release 11.1 Feature Sets for CiscoPro CPA1005 Routers
| Feature | IP1 | IP/IPX1 | IP/AT1 |
|---|---|---|---|
| LAN Support | |||
| IP | Yes | Yes | Yes |
| GRE | Yes | Yes | Yes |
| IPX | -- | Yes | -- |
| AppleTalk Versions 1 and 2 | -- | -- | Yes |
| DECnet IV | -- | -- | -- |
| DECnet V | -- | -- | -- |
| OSI CLNS | -- | -- | -- |
| Banyan VINES | -- | -- | -- |
| XNS | -- | -- | -- |
| Apollo Domain | -- | -- | -- |
| Bridging | |||
| Transparent and
translational |
Yes | Yes | Yes |
| Concurrent routing and bridging | -- | -- | -- |
| LAN extension host | -- | -- | -- |
| SRB | -- | -- | -- |
| SRT | -- | -- | -- |
| SR/TLB | -- | -- | -- |
| Multiring | -- | -- | -- |
| Wide Area Support: Services | |||
| HDLC | Yes | Yes | Yes |
| PPP | Yes | Yes | Yes |
| Frame Relay | Yes | Yes | Yes |
| ISDN | -- | -- | -- |
| X.25 | Yes | -- | -- |
| LAP-B | Yes | -- | -- |
| SMDS | Yes | Yes | Yes |
| SW56 | Yes | Yes | Yes |
| IPXWAN 2.0 | -- | -- | -- |
| ATM-DXI | -- | -- | -- |
| Wide Area Support: Optimization | |||
| Compression | Yes | Yes | Yes |
| Dial-on-demand | Yes | Yes | Yes |
| Bandwidth-on-demand | Yes | Yes | Yes |
| Dial backup | Yes | Yes | Yes |
| Custom queuing | Yes | Yes | Yes |
| Priority queuing | Yes | Yes | Yes |
| Weighted fair queuing | Yes | Yes | Yes |
| Snapshot routing | -- | -- | -- |
| IP: Host Services | |||
| Telnet | Yes | Yes | Yes |
| ARP | Yes | Yes | Yes |
| FTP | Yes | Yes | Yes |
| NTP | -- | -- | -- |
| IP: Routing Protocols | |||
| RIP v1, v2 | Yes | Yes | Yes |
| IGRP | Yes | Yes | Yes |
| Enhanced IGRP | Yes | Yes | Yes |
| OSPF | -- | -- | -- |
| BGP | -- | -- | -- |
| EGP | -- | -- | -- |
| ES-IS | -- | -- | -- |
| IS-IS | -- | -- | -- |
| NHRP | -- | -- | -- |
| PIM | -- | -- | -- |
| IP multicast | -- | -- | -- |
| Policy-based routing | -- | -- | -- |
| HSRP | -- | -- | -- |
| Other Routing | |||
| IPX RIP | -- | Yes | -- |
| IPX NLSP | -- | -- | -- |
| AT RTMP | -- | -- | Yes |
| AT AURP | -- | -- | -- |
| AT SMRP | -- | -- | -- |
| VINES SRTP | -- | -- | -- |
| IBM Support | |||
| SRB/RSRB | -- | -- | -- |
| DLSw+ | -- | -- | -- |
| SNA & NetBIOS WAN optimization | -- | -- | -- |
| SDLC | -- | -- | -- |
| SDLLC | -- | -- | -- |
| STUN | -- | -- | -- |
| QLLC | -- | -- | -- |
| Bisync | -- | -- | -- |
| FR SNA support - RFC 1490 | -- | -- | -- |
| BAN for SNA FR support | -- | -- | -- |
| TG/COS | -- | -- | -- |
| DSPU | -- | -- | -- |
| APPN | -- | -- | -- |
| Management | |||
| AutoInstall | -- | -- | -- |
| CDP | Yes | Yes | Yes |
| SNMP | Yes | Yes | Yes |
| RMON: events & alarms | -- | -- | -- |
| RMON: 9 groups | -- | -- | -- |
| Auto modem config. | -- | -- | -- |
| NetView native service point | -- | -- | -- |
| Security | |||
| Access lists | Yes | Yes | Yes |
| Access security | Yes | Yes | Yes |
| TACACS+ | -- | -- | -- |
| RADIUS | -- | -- | -- |
| MD5 routing authentication | -- | -- | -- |
| Lock and key | Yes | Yes | Yes |
| MAC security for hublets | -- | -- | -- |
| Kerberized login | -- | -- | -- |
| Protocol Translation | |||
| Telnet | -- | -- | -- |
| rlogin | -- | -- | -- |
| LAT | -- | -- | -- |
| TN3270 | -- | -- | -- |
| X.25 | -- | -- | -- |
| PPP | -- | -- | -- |
| Remote Node: Access Protocols | |||
| SLIP | -- | -- | -- |
| CSLIP | -- | -- | -- |
| PPP | -- | -- | -- |
| CPPP | -- | -- | -- |
| NetBEUI over PPP | -- | -- | -- |
| IPXCP | -- | -- | -- |
| NASI | -- | -- | -- |
| ATCP | -- | -- | -- |
| ARAP 1.0/2.0 | -- | -- | -- |
| Remote Node: Access Services | |||
| DHCP | -- | -- | -- |
| IP address pooling | -- | -- | -- |
| Async master interfaces | -- | -- | -- |
| MacIP | -- | -- | -- |
| IPX on virtual async interfaces | -- | -- | -- |
| ARAP on virtual async interfaces | -- | -- | -- |
| LPD | -- | -- | -- |
| Menus | -- | -- | -- |
| CHAT scripts | -- | -- | -- |
| Terminal Services | |||
| Telnet | -- | -- | -- |
| rlogin | -- | -- | -- |
| X.25 PAD | -- | -- | -- |
| Mop | -- | -- | -- |
| LAT | -- | -- | -- |
| TN3270 | -- | -- | -- |
| XRemote | -- | -- | -- |
| Interface Support: LAN | |||
| Ethernet AUI | -- | -- | -- |
| Ethernet 10BaseT | Yes | Yes | Yes |
| 4/16-Mbps TRing | -- | -- | -- |
| FDDI | -- | -- | -- |
| Interface Support: WAN | |||
| Sync. serial | Yes | Yes | Yes |
| Async. serial | -- | -- | -- |
| ISDN BRI | -- | -- | -- |
| Channelized T1/E1/ISDN PRI | -- | -- | -- |
| G.703 | -- | -- | -- |
| ATM | -- | -- | -- |
| HSSI | -- | -- | -- |
Installing the Router Software Feature Sets Using Microsoft Windows 3.1
In addition to the router software, the CD-ROM also contains the CiscoPro Software Installer, which you can use to download the software to the router. The CiscoPro Software Installer is designed to work with a PC running Microsoft Windows 95. The booklet included with the CD-ROM explains how to perform this simple process. However, you cannot use the CiscoPro Software Installer on a system running Microsoft Windows 3.1.
This section describes an alternative method you can use to install the router software from the CD-ROM onto the router using a PC running Microsoft Windows 3.1. The process requires that you first obtain a Trivial File Transfer Protocol (TFTP) application or a remote copy protocol (rcp) application, which you can use to set up your PC as a TFTP server or an rcp server. You can use either the copy TFTP flash or copy rcp flash command to download the router software images to the router from a system running Microsoft Windows 3.1.
This section provides steps that describe how to install the router software using a Microsoft Windows 3.1 PC with a TFTP application. To install the software using an rcp application, follow the same procedure and substitute rcp for TFTP in the instructions. You must also substitute the copy rcp flash command for the copy TFTP flash command in Step 6.
Command Reference Pages for TFTP and rcp
This section includes reference pages providing detailed information about the copy rcp flash and copy tftp flash commands. This information supplements the information provided in the steps described earlier in the section"Installing the Router Software Feature Sets Using Microsoft Windows 3.1," page 12.
To copy a file from a network server to the router or to another destination using rcp, use the copy rcp flash EXEC command.
Syntax Description
Command Mode
EXEC
Usage Guidelines
The rcp protocol requires that a client send the remote username of an rcp request to the server. When you issue the copy rcp flash command, by default the Cisco IOS software sends the username associated with the current teletype (TTY), if that name is valid. For example, if the user is connected to the router through Telnet and the user was authenticated through the username command, then the software sends that username as the remote username.
If the TTY username is invalid, the software uses the host name as the both the remote and local usernames. To specify a different remote username to be sent to the rcp server, use the ip rcmd remote-username command. You can also specify the path of an existing directory along with the remote username.
If you copy a system image from a personal computer used as a file server, the remote host computer must support the remote shell (rsh) protocol.
Use the copy rcp flash to copy a system image from a network server to the router's internal Flash memory using rcp. The Cisco IOS software prompts for the address of the rcp server and rcp filename. When you issue this command, the system provides an option to erase existing Flash memory before writing onto it. The entire copying process takes several minutes and differs from network to network.
Examples
The following example shows how to use the copy rcp flash command. The interface might differ slightly on other systems. This example copies a system image named file1 from the netadmin1 directory on the remote server named SERVER1.CISCO.COM with an IP address of 131.108.101.101 to Flash memory. To ensure that enough Flash memory is available to accommodate the system image to be copied, the Cisco IOS software allows you to erase the contents of Flash memory first.
If the partition is read-only and has dual Flash memory bank support in boot ROMs, the session continues as follows:
The file will be copied into the partition given earlier by the user:
If the partition is read/write, the session continues as follows:
The file will be copied into the partition given earlier by the user:
Related Commands
boot config
To copy a file from a TFTP server to the router or to another destination, use the copy tftp flash EXEC command.
Syntax Description
Command Mode
EXEC
Usage Guidelines
The system prompts for the address of the TFTP server and TFTP filename if you do not provide them at the command line. When copying to internal Flash memory, the system provides an option to erase existing internal Flash memory before writing onto it. The entire copying process takes several minutes and differs from network to network.
Examples
The following example shows sample output of copying a system image named file1 into Flash memory:
If the partition is read-only and has dual Flash memory bank support in boot ROMs, the session continues as follows:
The file will be copied into the partition given earlier by the user:
If the partition is read/write, the session continues as follows:
The file will be copied into the partition given earlier by the user:
Related Commands
copy flash tftp
Additional Release Note Information
For detailed information about this software release, see the Enterprise release notes located on the Cisco Connection Documentation, CiscoPro Solutions CD-ROM. Information that pertains to this feature pack includes the following:
Using Cisco IOS Release 11.1 Electronic Documentation
This section provides general information about the Cisco IOS software documentation delivered on the Cisco Connection Documentation CD-ROM that is included with your feature packs. This section also tells you how to navigate through the electronic documentation hierarchy. It discusses the following topics:
About the Cisco IOS Software Documentation
Cisco IOS online software documentation is organized into three main categories:
Navigating the Electronic Documentation
This section explains how to navigate from the "Cisco Connection Documentation" home page to the "Cisco IOS Configuration Guides and Command References" page.
When you get to the "Cisco IOS Release 11.1" page (Step 4 that follows), you can access any of the Cisco IOS Release 11.1 documentation. Step 4 gives a brief description of the various documents you can access through the "Cisco IOS Release 11.1" page. Step 5 directs you to select the bulleted item "Cisco IOS Configuration Guides and Command References" from the "Cisco IOS Release 11.1" page. You can select any of the bulleted items to navigate to other documents. This set of steps uses the "Cisco IOS Configuration Guides and Command References" link as an example to illustrate how to get to a specific document.
To navigate through the electronic documentation to the "Cisco IOS Configuration Guides and Command References" page, follow these steps:
Each module consists of a configuration guide and command reference. The first chapter of each document of a set is called "About the Cisco IOS Software Documentation." Each chapter includes a section called "Cisco IOS Software Documentation Organization," which provides a documentation roadmap and describes the structure and content of the guides and references. You should read this chapter to familiarize yourself with the overall structure and organization of the documentation so you can more readily find information you need to set up, configure, and maintain the router to support your particular feature set.
To navigate through the electronic documentation to the "Cisco IOS Configuration Guides and Command References" page, follow these steps:
For service and support for a product purchased from a reseller, contact the reseller. Resellers offer a wide variety of Cisco service and support programs, which are described in the section "Service and Support" in the information packet that shipped with your chassis.
For service and support for a product purchased directly from Cisco, use CCO.
CCO is Cisco Systems' primary, real-time support channel. SMARTnet customers and partners can self-register on CCO to obtain additional content and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously---a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact ccohelp@cisco.com. For additional information, contact ccoteam@cisco.com.
Please use CCO to obtain general information about Cisco Systems, Cisco products, or upgrades. If CCO is not accessible, contact 800 553-6387, 408 526-7208, or csrep@cisco.com.
Use straight-through cables if you are connecting by means of a 10Base-T hub.
copy tftp flash
Address or name of remote host [255.255.255.255]?
131.108.1.1
Source file name?
d:\images\cisco.mz
Destination file name [d:\images\cisco.mz]?
cisco.mz
Erase flash device before writing? [confirm]
yes
#
reload
flash
Specifies internal Flash memory as the destination of the copy operation.
Router1# configure terminal
Router1(config)# rcmd remote-username netadmin1
Router(config)# Ctrl-Z
Router# copy rcp flash
System flash directory, partition 2:
File Length Name/status
1 984 file1 [deleted]
2 984 file1
[2096 bytes used, 8386512 available, 8388608 total]
Address or name of remote host [255.255.255.255]? 131.108.101.101
Source file name? file1
Destination file name [file1]?
Accessing file 'file1' on 131.108.101.101...
Loading dirt/ssangiah/file1 .from 131.108.101.101 (via Ethernet0): ! [OK]
Erase flash device before writing? [confirm]
Flash contains files. Are you sure you want to erase? [confirm]
Copy 'file1' from server
as 'file1' into Flash WITH erase? [yes/no] yes
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
Loading file1 from 131.108.101.101 (via Ethernet0): !
[OK - 984/8388608 bytes]
Verifying checksum... OK (0x14B3)
Flash copy took 0:00:01 [hh:mm:ss]
Router# copy rcp flash
System flash partition information:
Partition Size Used Free Bank-Size State Copy-Mode
1 4096K 2048K 2048K 2048K Read Only RXBOOT-FLH
2 4096K 2048K 2048K 2048K Read/Write Direct
[Type ?<no> for partition directory; ? for full directory; q to abort]
Which partition? [default = 2]
**** NOTICE ****
Flash load helper v1.0
This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.
If you are logged in via telnet, this connection will terminate.
Users with console access can see the results of the copy operation.
---- ******** ----
Proceed? [confirm]
System flash directory, partition 1:
File Length Name/status
1 3459720 master/igs-bfpx.100-4.3
[3459784 bytes used, 734520 available, 4194304 total]
Address or name of remote host [255.255.255.255]? 131.108.1.1
Source file name? master/igs-bfpx-100.4.3
Destination file name [default = source name]?
Loading master/igs-bfpx.100-4.3 from 131.108.1.111: !
Erase flash device before writing? [confirm]
Flash contains files. Are you sure? [confirm]
Copy 'master/igs-bfpx.100-4.3' from TFTP server
as 'master/igs-bfpx.100-4.3' into Flash WITH erase? [yes/no] yes
System flash directory, partition 2:
File Length Name/status
1 3459720 master/igs-bfpx.100-4.3
[3459784 bytes used, 734520 available, 4194304 total]
Address or name of remote host [255.255.255.255]? 131.108.1.1
Source file name? master/igs-bfpx.100-4.3
Destination file name [default = source name]?
Accessing file 'master/igs-bfpx.100-4.3' on ABC.CISCO.COM...
Loading master/igs-bfpx.100-4.3 from 131.108.1.111: !
Erase flash device before writing? [confirm]
Flash contains files. Are you sure? [confirm]
Copy 'master/igs-bfpx.100-4.3' from TFTP server
as 'master/igs-bfpx.100-4.3' into Flash WITH erase? [yes/no] yes
boot system flash
cd
copy flash rcp
ip rcmd remote-username
verify flash
flash
Specifies internal Flash memory as the destination of the copy operation.
Router# copy tftp flash
System flash directory, partition 2:
File Length Name/status
1 984 file1 [deleted]
2 984 file1
[2096 bytes used, 8386512 available, 8388608 total]
Address or name of remote host [255.255.255.255]? 223.255.254.254
Source file name? file1
Destination file name [file1]?
Accessing file 'file1' on 223.255.254.254...
Loading dirt/ssangiah/file1 .from 223.255.254.254 (via Ethernet0): - [OK]
Erase flash device before writing? [confirm]
Flash contains files. Are you sure you want to erase? [confirm]
Copy 'file1' from server
as 'file1' into Flash WITH erase? [yes/no] yes
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
Loading file1 from 223.255.254.254 (via Ethernet0): !!!!...
[OK - 984/8388608 bytes]
Verifying checksum... OK (0x14B3)
Flash copy took 0:00:01 [hh:mm:ss]
Router# copy tftp flash
System flash partition information:
Partition Size Used Free Bank-Size State Copy-Mode
1 4096K 2048K 2048K 2048K Read Only RXBOOT-FLH
2 4096K 2048K 2048K 2048K Read/Write Direct
[Type ?<no> for partition directory; ? for full directory; q to abort]
Which partition? [default = 2]
**** NOTICE ****
Flash load helper v1.0
This process will accept the copy options and then terminate
the current system image to use the ROM based image for the copy.
Routing functionality will not be available during that time.
If you are logged in via telnet, this connection will terminate.
Users with console access can see the results of the copy operation.
---- ******** ----
Proceed? [confirm]
System flash directory, partition 1:
File Length Name/status
1 3459720 master/igs-bfpx.100-4.3
[3459784 bytes used, 734520 available, 4194304 total]
Address or name of remote host [255.255.255.255]? 131.108.1.1
Source file name? master/igs-bfpx-100.4.3
Destination file name [default = source name]?
Loading master/igs-bfpx.100-4.3 from 131.108.1.111: !
Erase flash device before writing? [confirm]
Flash contains files. Are you sure? [confirm]
Copy 'master/igs-bfpx.100-4.3' from TFTP server
as 'master/igs-bfpx.100-4.3' into Flash WITH erase? [yes/no] yes
System flash directory, partition 2:
File Length Name/status
1 3459720 master/igs-bfpx.100-4.3
[3459784 bytes used, 734520 available, 4194304 total]
Address or name of remote host [255.255.255.255]? 131.108.1.1
Source file name? master/igs-bfpx.100-4.3
Destination file name [default = source name]?
Accessing file 'master/igs-bfpx.100-4.3' on ABC.CISCO.COM...
Loading master/igs-bfpx.100-4.3 from 131.108.1.111: !
Erase flash device before writing? [confirm]
Flash contains files. Are you sure? [confirm]
Copy 'master/igs-bfpx.100-4.3' from TFTP server
as 'master/igs-bfpx.100-4.3' into Flash WITH erase? [yes/no] yes
verify
verify flash