Cisco Confidential


Product	Features	Page
Cisco LightStream 1010	An ATM switch for campus and enterprise backbones as well as ATM WAN edge deployment Advanced traffic management (ATM) Winner of the Best of LANTIMES award Delivers the performance, scalability, and robustness required for true production ATM deployment	152
Cisco BPX 8600Series	A carrier-class network backbone for service provider environments A standards-based ATM switch that supports broadband, IP, and broadband/narrowband service delivery Integrates cleanly with OSS infrastructures, offering carrier-class reliability, unbeatable port density, and the industry's highest IP scalability	153
Cisco MGX 8220	An integrated or stand-alone solution for concentrating narrowband traffic over a wide-area ATM network backbone Offers the simplest way to deliver leading-edge narrowband services	155
Cisco IGX 8400	A carrier-class network backbone for service provider and large enterprise networks Tightly integrated with Cisco router and access products Supports delivery of broadband and narrowband services with end-to-end high quality of service	157
Cisco MGX 8800 Series	Provides the best of both IP and ATM in a single platform Offers the industry's widest breadth of integrated IP+ATM services and unmatched deployment flexibility Provides both IP and ATM services in a single platform	159

Cisco LightStream 1010 ¹

The Cisco LightStream 1010 offers the sophistication and depth of functionality required for true advanced traffic management (ATM) production. ATM mechanisms support current, bursty, best-effort traffic, while also delivering the QoS guarantees required for applications of the future. Available bit rate (ABR) congestion control support allows the LightStream 1010 to slow traffic sources before congestion becomes excessive, whereas support for the ATM Forum PNNI protocols allows networks of LightStream 1010s to scale to hundreds of nodes while still delivering interoperable, QoS-based routing. Value-added capabilities allow for ATM access lists and load sharing across redundant links. All this sophistication is hidden, however, by the true standards-based, plug-and-play capabilities of the LightStream 1010, and advanced management functions allow for unprecedented levels of network visibility and control.

Key Features

Switch architecture---Fully nonblocking shared-memory switch fabric; field upgradable feature card that implements all advanced switch and traffic management functions
Network management---CWSI 2.1, CiscoView for the Lightstream 1010
High-speed switching architecture---Allows up to 32 OC-3 connections

Specifications


Feature	LightStream 1010
Fixed Ports	None
Modular Slots	5
Supported Interfaces	OC-3 / OC-12 ATM single mode/multimode STM-1 / STM-4 ATM single mode/multimode DS3 4-port/2-port E3 4-port/2-port T1/E1 ATM trunk and T1/E1 circuit emulation ATM 25 Mbps
DRAM	16 MB (default)
Capacity	5 Gbps, 65,536 cells of buffering
Dimensions (HxWxD)	10.5 x 17.2 x 18.1 in.
Connections	Switch to switch: IISP, PNNI User: UNI 3.0/3.1/4.0 SVCs and PVCs, point-to-point and point-to-multipoint, soft PVCs, SVC tunneling over PVPs

For More Information

See the LightStream Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/switch/ls1010/

Cisco BPX 8600 Series Wide-Area Switches ²

The Cisco BPX® 8600 series switches are powerful broadband wide-area switches with advanced IP and ATM capabilities. Designed to meet the demanding, high-traffic needs of a public service provider or large private enterprise, the BPX switch delivers high-performance ATM switching, multiservice adaptation, and aggregation for all types of user traffic.

Key Features

Support for integrated IP and ATM services
Virtual Switch Interface allows for multiple controllers to enable new services
Supports MPLS to enable services such as highly scalable IP Virtual Private Networks with Quality of Service guarantees
Up to 1,000,000 cells buffering per interface card allocated per virtual path/virtual connection (VP/VC)
Supports up to 16 classes of service
ABR virtual source/virtual destination (VS/VD) traffic management per ATM Forum Specification V.4.0
Virtual trunking
All components are optionally redundant to 100 percent system redundancy
SONET APS for OC-3c/STM-1 and OC-12c/STM-4 BXM modules
Network management:
- In-band and out-of-band network management supported
- SNMP and MIB support for configuration and monitoring
- Trivial File Transport Protocol (TFTP) support for bulk statistics collection
- Interfacing to network management is provided through one 802.3 attachment unit interface (AUI) interface for local connection to StrataView Plus® and two asynchronous control/printer ports
Automatically reroutes connections in the event of a link failure
Per-virtual connection control capabilities manage queuing, rate scheduling, statistics collection, and fair allocation of bandwidth
Advanced class-of-service (CoS) management enables managers to tailor individual connections to meet service level guarantees for IP, ATM, and Frame Relay traffic

Specifications


Feature	Cisco BPX 8600 Series Wide-Area Switch
Fixed Ports	None
Modular Slots	15 slots (2 slots reserved for redundant control and switch modules, 1 slot reserved for alarm status monitor (ASM) module, 12 slots for general-purpose interface modules)
Broadband ATM Interfaces	Conformance to ATM Forum Specification V.3.1 and TM 4.0 T3/DS-3 (44.736 Mbps) per TA-TY-000773 and direct mapping per ITU-T G.804 E3 per ITU-T Rec. G.804 OC-3c (155 520 Mbps) with SONET framing per Bellcore GR-253, ANSI 1.105 STM-1 (155.520 Mbps) with SDH framing per ITU-T Rec. G.707-G.709 OC-12c (622.08 Mbps) SONET per Bellcore GR-253, ANSI T1.105 STM-4 (622.08 Mbps) with SDH framing per ITU-T Rec. G.707-G.709
Maximum Configuration	24 OC-12/STM-4 ports; 96 0C-3c/STM-1 ports; 144 T3/E3 ports; 1280 T1/E1 ports 30,000 ports (at 64 kbps, DS-0) Scalable multishelf architecture
Crosspoint Switch Fabric	19.2 Gbps switch capacity 12 800/1600-Mbps switch ports that can support up to OC-12c/STM-4 cell rate
PVC Service Classes	Constant bit rate (CBR) Real time variable bit rate (RT-VBR) Non-real time variable bit rate (NRT-VBR) Unspecified bit rate (UBR) Available bit rate (ABR)
Broadband Network Interfaces	Conformance to ATM Forum Specification V.3.1and TM4.0 T3/DS3 (44.736 Mbps) E3 (34.368 Mbps) OC-3c (155.520 Mbps) SONET STM-1 (155.520 Mbps) SDH OC-12c (622 Mbps) SONET STM-4 (622 Mbps) SDH
Dimensions (HxWxD)	8620: 22.75 x 17.72 x 27 in. 8650: 28 x 17.72 x 27 in. 8680: 22.75 x 17.72 x 27 in.

For More Information

See the Cisco BPX 8600 web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/wan/bpx/

Cisco MGX 8220 Edge Concentrator ³

The MGX 8220 edge concentrator concentrates narrowband traffic for Cisco BPX 8600 series and LS 1010 switches, Cisco 7500 series routers, and other vendors' ATM switches. Single-platform service creation allows you to quickly deploy innovative narrowband Frame Relay, ATM, Internet, SNA, video, and circuit emulation for transport over the network backbone. Traffic can be aggregated from as many as 80 T1 or E1 ports onto a single port of a trunk card, slashing cost per port and providing unmatched scalability. Standards-based and designed for carrier-class environments, the MGX 8220 offers the simplest way to deliver leading-edge narrowband services, integrating cleanly with your provisioning, billing, monitoring, and reporting infrastructure.

Key Features

Redundancy:
- 1:1 optional common equipment redundancy
- 9:1 optional subscriber interface redundancy
Network management:
- Simple Network Management Protocol (SNMP) configuration and monitoring
- Trivial File Transfer Protocol (TFTP) software download
- TFTP statics collection
- CiscoView
Supports a wide range of narrowband and mid-band services:
- Frame Relay UNI/NNI
- High speed Frame Relay
- ATM Frame UNI
- ATM UNI/NNI (T1/E1 ATM UNI and n x T1/E1 IMA)
- SNA
- Circuit Emulation
- Frame forwarding for PPP, X.21, and X.25 transport

Specifications


Feature	MGX 8220
Fixed Ports	None
Modular Slots	16 slots: 10 slots available for function modules 6 slots reserved for common control cards - 2 for common control (ASC) (1 reserve, 1 hot standby) - 2 for service trunking (1 active, 1 hot standby) - 2 for SRM (1 active, 1 hot standby)
Subscriber Interfaces	T1/E1 Frame Relay (fractional and channelized) High-speed Frame Relay ATM Frame UNI n x T1/E1 IMA UNI T1/E1 ATM T1/E1 Circuit Emulation (UDT and SDT) SNA/SDLC Bisync
Trunk Interfaces	T3/E3 SONET STS-OC-3/STM-1 IMA (n x T1/E1)
Connection Management	Permanent virtual circuits (PVCs) or switched virtual circuits (SVCs)
Switching	320-Mbps ATM cell bus
Power Requirements	-48 VDC or 110/220 VDC 400 watts Redundant power feeds
Capacity	640 Mbps ATM cell bus
Dimensions (HxWxD)	8.75 x 17.45 x 20 in. 19 in. rack mountable

For More Information

See the Cisco MGX 8220 web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/wan/mgx/

Cisco IGX 8400 Series ⁴

The IGX 8400 series wide-area switches provide the backbone required to deliver today's enterprise data, voice, fax, and video applications. The IGX 8400 series switches fully integrate with other Cisco WAN switching, access and customer premise equipment (CPE) products to offer an end-to-end networking solution that maximizes operational efficiencies and reduces costs.

Key Features

Multiservice integration---supports all applications, reducing network operation costs and increasing WAN bandwidth savings due to statistical multiplexing; consolidates multiple WAN infrastructures; provides flexibility for deploying voice over IP, ATM, or Frame Relay
Bandwidth efficiency---maximizes efficiency of expensive WAN circuits for data, voice and video traffic, thereby reducing recurring bandwidth costs
Performance and QoS guarantees---delivers high performance and full control over network resources with per-VC queuing, per-VC rate scheduling, and multiple classes of service (COS) to guarantee QoS levels for the individual applications; supports all applications, according to their specific requirements, using advanced traffic management and CoS features
Flexible, scalable network design---available as the IGX 8410 with eight slots, the IGX 8420 with 16 slots, or the IGX 8430 with 32 slots, the IGX 8400 series offers the greatest flexibility to meet a wide range of enterprise needs
Seamless integration of existing IGX 8400, BPX 8600, and MGX 8220 networks
End-to-End Integration---extends WAN backbone to branch offices, providing the same high service levels regardless of location; provides value-added interworking between existing Cisco routers and LAN switches for seamless traffic flow between LAN/campus and WAN environments; reduces operational efforts with integrated network management systems

Specifications


Feature	Cisco IGX 8410/8420/8430/SES
Number of Slots	IGX 8410: 8 slots (2 slots reserved for redundant processor modules) IGX 8420: 16 slots (2 slots reserved for redundant processor modules) IGX 8430: 32 slots (2 slots reserved for redundant processor modules) SES: 7 slots (2 slots reserved for redundant processor modules; some service modules take up half a slot, while others take a full slot)
ATM Interfaces	2-port OC-3c/STM-1 SMF/MMF 4-port OC-3c/STM-1 SMF/MMF/Electrical 3- or 6-port T3/E3 4- or 8-port nxT1/E1 (IMA)
Frame Relay Interfaces	4- or 8-port T1/E1 12-port V.35/X.21 4-port HSSI 2-port T3/E3* 2-port Channelized T3*
Voice Interfaces	1-port T1/E1/J1 (CAS and CCS) Compression: G.726, G.728, G.729, G.729a Silent suppression Echo cancellation Fax and modem detection Fax Relay
Circuit Data and Circuit Emulator Interfaces	4-or 8-port EIA/TIA-232 4-port V.35, EIA/TIA-449 SNA/SDLC, BSC, HDLC/X.25 frame forwarding 8-port T1/E1* 2-port T3/E3*
Dimensions (HxWxD)	IGX 8410: 24.4 x 19.9 x 27.1 in. IGX 8420: 32 x 19.9 x 27.1 in. IGX 8430: 55 x 19.9 x 27.1 in. SES: 12.2 x 17.7 x 28.3 in.

* Requires SES

For More Information

See the Cisco IGX 8400 web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/wan/igx/

Cisco MGX 8800 Series Wide-Area Edge Switches ⁵

The Cisco MGX 8800 series wide-area edge switch offers the industry's widest breadth of integrated IP+ATM services and unmatched deployment flexibility. Now, service providers can provision today's revenue-generating leased-line, Frame Relay, ATM, and Internet services while enabling deployment of integrated VPN, managed intranet, electronic commerce, voice, and video services over a packet infrastructure. The MGX 8800 edge switch provides the best of both worlds---IP and ATM---in a single platform, to enable service providers to reduce capital and operational costs by eliminating the need to build multiple overlay networks. No matter what demands the market makes, the Cisco MGX 8800 delivers the scalability and widest range of service interfaces to meet the demand.

Key Features

Scalable from 1.2 to 45 Gbps of nonblocking throughput with single chassis
Flexible IP+ATM multiservice platform
Integration of digital cross connect, ATM/FR switching, voice switching, and IP routing in a single platform
Highest reliability, availability, and serviceability in the industry
Managed by Cisco's IP+ATM service management tools
All components are optionally redundant to 100-percent system redundancy, including the control processor switching fabric, network interfaces, service interfaces, critical backplane signals, power supplies, power modules, and cooling fans

Specifications


Feature	Cisco MGX 8800
Fixed Ports	None
Modular Slots	32 single-height (16 double-height) function module slots Single-height slots can be in-service converted to double-height slots by removal of midrail dividers 2 double-height slots reserved for redundant processor switch modules 4 single-height (2 double-height) slots reserved for optional value-added service resource modules 24 single-height (12 double-height) slots for service modules
Network Interfaces	OC-48c/STM-16 OC-12c/STM-4 OC-3c/STM-1 T3 E3 Channelized T3 (down to DS0) n x T1/E1 T1/E1 Channelized T1 (DS0 and nx DS0) Channelized E1 (DS0 and nx DS0) HSSI, X.21, V.35 Ethernet Fast Ethernet Fiber Distributed Data Interface (FDDI)
Services	IP VPNs Voice Frame Relay PPP access Cell relay Frame Relay-to-ATM network interworking Frame Relay-to-ATM service interworking Circuit Emulation Complete suite of Cisco IOS-based protocols and services
Node Synchronization	Internal Stratum-3 clock source External T1/E1 BITS source External source received inband over the network (synchronization to software-programable primary and secondary sources with automatic switchover)
Dimensions (H x W x D)	29.75 x 17.72 x 21.5 in.

For More Information

See the Cisco MGX 8800 web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/wan/mgx8800/

¹For ordering information on this product, contact your Cisco Account Team.
²For ordering information on this product, contact your Cisco Account Team.
³For ordering information on this product, contact your Cisco Account Team.
⁴For ordering information on this product, contact your Cisco Account Team.
⁵For ordering information on this product, contact your Cisco Account Team.

Table of Contents

ATM Products

ATM Products

ATM Products at a Glance

Cisco LightStream 1010 ¹

Key Features

Specifications

For More Information

Cisco BPX 8600 Series Wide-Area Switches ²

Key Features

Specifications

For More Information

Cisco MGX 8220 Edge Concentrator ³

Key Features

Specifications

For More Information

Cisco IGX 8400 Series ⁴

Key Features

Specifications

For More Information

Cisco MGX 8800 Series Wide-Area Edge Switches ⁵

Key Features

Specifications

For More Information