Cisco Confidential

Product	Features	Page
Cisco 700 Series	ISDN router 1-port BRI (optional NT1); optional 2 analog telephone ports Supports up to 30 users Integrated 4-port Ethernet hub (on 77x models)	19
Cisco 800 Series	ISDN router with Cisco IOS technologies 1-port BRI (optional NT1) Optional 4-port Ethernet hub and 2 analog telephone ports Advanced security features	22
Cisco 1000 Series	Fixed-configuration desktop access router 1-port Ethernet 1-port BRI (optional NT1) or 1-port sync or async serial	25
Cisco 1400 Series	ADSL routers Either 1-port Ethernet (10BaseT) and 1-port ATM-25 (1401) or 1-port Ethernet (10BaseT) and 1-port ADSL (DMT-2)(1417) Designed for DSL access up to 8 Mbps Part of Cisco's end-to-end DSL solutions	28
Cisco 1600 Series	Modular desktop access router 1- or 2-port Ethernet (10BaseT) 1-port BRI (optional NT1) or 1-port sync or async serial 1 WAN interface card (WIC) slot	30
Cisco 1720	Flexible, secure, modular access router 1-port autosensing 10/100 Fast Ethernet LAN 2 WAN slots Optional integrated firewall, DSU/CSU, ISDN NT-1, VPN tunnel server, and encryption	33
Cisco 2500 Series	Fixed and modular configuration access routers and servers Single or dual LAN; Ethernet or Token Ring Router/hub or access server Single, dual serial, or high-density serial models	36
Cisco 2600 Series	Modular access router, voice data gateway, and dial access server Single or dual LAN (Ethernet, 10/100 Mbps Ethernet, Token Ring and mixed Ethernet, and Token Ring options) Shares WAN interface cards and network modules with Cisco 1600,1720, and 3600 series Wide variety of media support, including async and sync serial, ISDN, channelized T1/E1, Ethernet, analog modems, and ATM	41
Cisco 3300 Series	Carrier-class SONET access device Fully redundant platform Combines SONET reliability and layer three awareness Ethernet interfaces support a variety of service interfaces that can be configured for bridging or routing, and connect to a local LAN via 10BaseT to a hub, switch, or router	46
Cisco 3600 Series	Modular, high-density access router 2-, 4-, and 6-slot models Wide variety of media support, including async and sync serial, ISDN, channelized T1/E1, Ethernet, Fast Ethernet, Token Ring, digital modems, and ATM Voice/fax over IP or Frame Relay	48
Cisco MC3810	Compact, low-cost, multiservice access concentrator 1-port Ethernet and 2-ports serial 6-ports analog or 24/30-ports digital voice Data, voice, and video integration	54
Cisco 4000 Series	Modular, high-density router 3 slots for all models Choice of 100-MHz or 133-MHz processor Wide variety of media support, including async and sync serial, ISDN, channelized T1/E1, Ethernet, Fast Ethernet, Token Ring, FDDI, HSSI, and ATM	57
Cisco AS5200 Series	Hybrid async and ISDN access servers 3 network interface card slots 2-ports PRI (T1/E1) and 2-ports serial 24 to 48 (T1) and 30 to 60 (E1) integrated modems	61


Cisco AS5300 Series	Hybrid async and ISDN access servers 3 network interface card slots 4- and 8-ports PRI (T1/E1) and 4-ports serial Up to 240 integrated modems	61


Cisco AS5300/Voice Gateway	High performance T1/E1 VoIP Gateway 4 T1/E1 ports (96/120 voice/fax channels) One 10/100 Fast Ethernet, and one 10 Base T Ethernet G.711, G.729, G.723.1 voice CODECs, 14.4 Fax Relay	66


Cisco AS5800/ AccessPath	High-end dial products Hybrid asynchronous serial and ISDN line service Accommodate both mobile users and high-bandwidth users	69


Cisco 7100 Series	Central site, integrated VPN router Comprehensive suite of VPN services, including encryption, tunneling, firewall, and bandwidth management Embedded I/O for VPN-centric network environments Service module slot for encryption/compression co-processing	71
Cisco 7200 Series	High-performance, high-density, modular, central site router Fully modular, chassis-based 4- or 6-slot models and choice of three system processors Wide variety of LAN and WAN options, including Ethernet, Fast Ethernet, 100VG-Any LAN, Token Ring, FDDI, serial, ISDN, HSSI, ATM, Packet over DS3/E3	75
Cisco 7500 Series	Premier high-end platform of multiprotocol routers 1- or 2-CyBus models offering 1 or 2 Gbps backplanes 5-, 7-, and 13-slot models Wide variety of LAN and WAN options including Ethernet, Fast Ethernet, 100VG-Any LAN, Token Ring, FDDI, serial, ISDN, HSSI, ATM, packet over DS3/E3	79
Cisco 12000 Series	Scalable gigabit switch router (GSR) Carrier class with 8- or 12-slot models Scalable switching fabric from 10-60 Gbps Optimized for IP	82

Cisco Routers and Access Products Port Matrix

	Cisco 700 Series	Cisco 800 Series	Cisco 1000 Series	Cisco 1400 Series	Cisco 1600 Series	Cisco 1720	Cisco 2500 Series	Cisco 2600 Series	Cisco 3600 Series	Cisco MC3810	Cisco 4000 Series	Cisco AS5200	Cisco AS5300	AS5300/Voice Gateway	Cisco AS5800	Cisco 7100 Series	Cisco 7200 Series	Cisco 7500 Series	Cisco 12000 Series
Fixed Ports Only	X	X	X	X
Fixed & Modular Ports					X	X	X	X		X		X	X	X	X	X
Modular Ports Only									X		X						X	X	X
LAN Ports
10-MB Ethernet	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X
10-MB Ethernet (fiber)									X						X	X	X	X
100-MB Ethernet						X		X	X		X				X	X	X	X
100-MB Eth. (fiber)									X						X	X	X	X
10/100-MB Ethernet						X		X	X				X	X		X
Integrated Eth. Hub	X	X					X
100 VG															X		X	X
Token Ring							X	X	X		X				X	X	X	X
FDDI/CDDI											X				X		X	X
ATM								X	X	X	X				X		X	X	X
Gigabit Ethernet																		X	X
WAN Ports
Sync Serial			X		X	X	X	X	X	X	X	X	X		X		X	X
Sync Serial w/ CSU					X	X	X	X	X	X
ISDN BRI (S/T)	X	X	X		X	X	X	X	X	X	X				X	X	X
ISDN BRI (U)	X	X	X		X	X	X	X	X						X	X	X
ISDN PRI/Ch T1								X	X	X	X	X	X	X	X		X	X
ISDN PRI w/ CSU								X	X	X		X	X	X	X		X	X
Async			X		X	X	X	X	X	X	X
POTS	X	X
Integrated Modems								X	X			X	X		X
HSSI									X		X				X	X	X
DS3											X				X	X	X
ATM OC-3									X		X				X		X	X	X
ATM				X				X	X	X	X				X		X	X	X
ATM - T1/E1								X	X	X
SONET															X		X	X
ADSL				X
Voice Ports
Analog	X	X						X	X	X
Digital								X	X	X			X	X			X

Memory Information for Distribution Routers

Router	Memory Type	Slots	Default Memory	Max Memory	Default Configuration Notes
700 Series	Flash DRAM	0 1	1 MB 1.5 MB (On board)	1 MB 2 MB
801 - 804	Flash DRAM	1 1	8 MB 4 MB (On board)	12 MB 12 MB	4 MB On board + 4 MB Mini Flash
805	Flash DRAM	1 1	4 MB 8 MB (On board)	12 MB 12 MB	4 MB On board + 4 MB Mini Flash
1000 Series	Flash (PCMCIA) DRAM	1 1	2 MB 8 MB	4 MB 8 MB	Flash is optional
1600 Series	Flash DRAM	1 1	4 MB 8 MB (On board)	16 MB 24 MB
1720	Flash DRAM	1 1	4 MB 16 MB (On board)	16 MB 48 MB	Uses Mini Flash
2500 Series	Flash DRAM	2 1	8 MB 4 MB	16 MB 16 MB	Slot 0 = 8 MB
2600 Series	Flash DRAM	1 2	8 MB 24 MB	16 MB 64 MB	Slot 0 = 8 MB Slot 0 = 16 MB; Slot 1 = 8 MB
3620	Flash (PCMCIA) Flash (SIMM) DRAM	2 2 4	0 8 MB 32 MB	32 MB 32 MB 64 MB	Slot 0 = 8 MB Slot 0 = 16 MB; Slot 1 = 16 MB
3640	Flash (PCMCIA) Flash (SIMM) DRAM	2 2 4	0 8 MB 32 MB	32 MB 32 MB 128 MB	Slot 0 = 8 MB Slot 0 = 16 MB; Slot 1 = 16 MB
3810	Flash DRAM	1 1	8 MB 32 MB	16 MB 32 MB
4500 / 4700	Flash DRAM Shared Boot Helper	2 2 1 1	4 MB 16 MB 4 MB 4 MB	16 MB 32 MB (4500-M) 64 MB (4700-M) 16 MB 16 MB	Slot 0 = 4 MB Slot 0 = 8 MB; Slot 1 = 8 MB (DRAM must be in pairs) Slot 0 = 4 MB
AS5200	Flash DRAM Shared Boot Flash	2 1 2 1	16 MB 8 MB 4 MB 8 MB	16 MB 16 MB 16 MB 8 MB	Slot 0 = 16 MB Slot 0 = 8 MB
AS5300	Flash DRAM Shared Boot Flash	2 2 1 1	8 MB 32 MB 16 MB 8 MB	16 MB 64 MB 16 MB 8 MB	Slot 0 = 8 MB Slot 0 = 32 MB
AS5300/Voice Gateway	Flash DRAM Shared Boot Flash	2 2	16 MB 64 MB 16 MB 8 MB	16 MB 64 MB 16 MB 8 MB	Slot 0 = 8 MB Slot 0 = 32 MB
7100 Series	Flash System SDRAM Packet SDRAM	2 2	40 MB 64 MB 64 MB	110 MB 256 MB 64 MB	Slot 0 = 40 MB Slot 0 = 64 MB
7200 Series	Flash (PCMCIA) Flash (internal) Shared (NPE-100) Shared (NPE-150) Shared (NPE-200) Shared (NPE-300) DRAM (NPE-100, 150, 200) DRAM (NPE-300)	2 1 4 4	16 MB 4 MB 0 1 MB 4 MB 32 MB 32 MB 32 MB	40 MB 4 MB 128 MB 256 MB	Slots 0-3 = 8 MB DIMMs

Router

Memory Type

Slots

Default Memory

Max Memory

Default Configuration Notes

700 Series

Flash

DRAM

1 MB

1.5 MB (On board)

1 MB

2 MB

801 - 804

Flash

DRAM

8 MB

4 MB (On board)

12 MB

4 MB On board + 4 MB Mini Flash

805

Flash

DRAM

4 MB

8 MB (On board)

12 MB

4 MB On board + 4 MB Mini Flash

1000 Series

Flash (PCMCIA)

DRAM

2 MB

8 MB

4 MB

8 MB

Flash is optional

1600 Series

Flash

DRAM

4 MB

8 MB (On board)

16 MB

24 MB

1720

Flash

DRAM

4 MB

16 MB (On board)

16 MB

48 MB

Uses Mini Flash

2500 Series

Flash

DRAM

8 MB

4 MB

16 MB

Slot 0 = 8 MB

2600 Series

Flash

DRAM

8 MB

24 MB

16 MB

64 MB

Slot 0 = 8 MB

Slot 0 = 16 MB; Slot 1 = 8 MB

3620

Flash (PCMCIA)

Flash (SIMM)

DRAM

8 MB

32 MB

64 MB

Slot 0 = 8 MB

Slot 0 = 16 MB; Slot 1 = 16 MB

3640

Flash (PCMCIA)

Flash (SIMM)

DRAM

8 MB

32 MB

128 MB

Slot 0 = 8 MB

Slot 0 = 16 MB; Slot 1 = 16 MB

3810

Flash

DRAM

8 MB

32 MB

16 MB

32 MB

4500 / 4700

Flash

DRAM

Shared

Boot Helper

4 MB

16 MB

4 MB

16 MB

32 MB (4500-M) 64 MB (4700-M)

16 MB

Slot 0 = 4 MB

Slot 0 = 8 MB; Slot 1 = 8 MB (DRAM must be in pairs)

Slot 0 = 4 MB

AS5200

Flash

DRAM

Shared

Boot Flash

16 MB

8 MB

4 MB

8 MB

16 MB

8 MB

Slot 0 = 16 MB

Slot 0 = 8 MB

AS5300

Flash

DRAM

Shared

Boot Flash

8 MB

32 MB

16 MB

8 MB

16 MB

64 MB

16 MB

8 MB

Slot 0 = 8 MB

Slot 0 = 32 MB

AS5300/Voice Gateway

Flash

DRAM

Shared

Boot Flash

16 MB

64 MB

16 MB

8 MB

16 MB

64 MB

16 MB

8 MB

Slot 0 = 8 MB

Slot 0 = 32 MB

7100 Series

Flash

System SDRAM

Packet SDRAM

40 MB

64 MB

110 MB

256 MB

64 MB

Slot 0 = 40 MB

Slot 0 = 64 MB

7200 Series

Flash (PCMCIA)

Flash (internal)

Shared (NPE-100)

Shared (NPE-150)

Shared (NPE-200)

Shared (NPE-300)

DRAM (NPE-100, 150, 200)

DRAM (NPE-300)

16 MB

4 MB

1 MB

4 MB

32 MB

40 MB

4 MB

128 MB

256 MB

Slots 0-3 = 8 MB DIMMs

Cisco Routers and Access Products Overview

Cisco's full line of routers ranges from home office access routers to central site access servers. The scope of Cisco's products supports a significant number of solution scenarios.

Ease of Use

Cisco's router configuration tools make it easy for end users, network administrators, resellers and consultants to install Cisco routers.

Cisco FastStep is an easy-to-use Microsoft Windows 95-, 98-, and NT 4.0-based software tool that simplifies the setup, monitoring, and troubleshooting of Cisco routers for small office and home office users. Cisco FastStep leads the user through a step-by-step, wizards-based procedure that simplifies the configuration of a Cisco router connected to an Internet Service Provider (ISP) or remote corporate network. A user can set up a Cisco 700, 800, or 1600 series router with FastStep software.

FastStep uses a graphical display of the process and a help box to lead the user through setting up the router.

FastStep software is available (no login required) from the CCO Software Center, or on a separate CD-R0M located in every accessory kit for supported products. For more information, see the Cisco FastStep Web site at http://www.cisco.com/go/faststep.

Cisco ConfigMaker is designed to configure a small to medium network of Cisco routers, switches, hubs, and other network devices from a single PC. Cisco ConfigMaker is an easy-to-use Microsoft Windows 95, 98, and NT 4.0-based software tool. Cisco ConfigMaker is designed for resellers, consultants, and network administrators who are proficient in LAN and WAN fundamentals and basic network design.

For fast and efficient configuration of Ethernet networks and WAN connectivity, Cisco ConfigMaker prompts users through the setup process. Online WAN configuration worksheets list important information that the network administrator must obtain from the Internet service provider or WAN service provider before configuring the devices. To configure devices:

The user drags and drops devices and connections from the palette to create a network topology diagram.
Individual devices and connections are configured using the task wizards and information collected using the worksheets.
Configurations are downloaded to the appropriate devices from a standalone PC or over the network.

The ConfigMaker graphical user interface displays a network diagram that shows the network devices in relationship to each other. Wizards are accessed from the Task List, which keeps track of progress.

ConfigMaker supports 800, 1600, 1720, 2500, 2600, 3600, and 4500/4700 routers, switches, and the Cisco IOS Firewall Feature Set. Check documentation for more details on specific modules and models supported. No previous experience with the Cisco IOS® software command line interface is required. ConfigMaker is available (no login required) from the CCO Software Center, or on a separate CD-ROM located in every Software Feature Pack for supported products. For more information, See the Cisco Configmaker Web site at http://www.cisco/go/configmaker.

Bandwidth Optimization

Cisco IOS technologies deliver bandwidth optimization with these features:

Multichassis Multilink PPP---A Cisco IOS value-added feature that allows you to stack multiple Cisco NASs and configure them as a single, logical dial-in entity for multilink PPP; allows multilink member links to terminate to separate physical NASs while still being treated by the IOS as a single multilink bundle, thereby allowing the administrator to share NAS links to the PSTN more cost effectively (no need to provision separate NASs for multilink users)
Bandwidth Allocation Protocol (BACP)---an enhancement for PPP that allows the administrator to control the admission of new links in a multilink PPP bundle
Callback---a wide range of support for MS callback, ISDN callback, PPP standard callback, Caller ID callback, and Dialer callback
Dial-on-demand routing (DDR)---minimizes ownership cost by allowing a router to automatically initiate and close a circuit-switched session
Bandwidth on demand (BOD)---dynamically increases network throughput by allowing a router to automatically establish a new, load-sharing connection to the destination, in response to a definable load level
Snapshot routing---a routing update mechanism that minimizes ownership costs by eliminating the need for configuring and maintaining large static tables, allowing dynamic routing protocols to be used on DDR lines
Virtual bandwidth reservation and priority queuing---enhances throughput by reserving bandwidth and prioritizing traffic based on the type of application, its source, or its destination
IPX® Protocol spoofing---optimizes Novell networking by responding to a server's Watchdog requests on behalf of a remote client
Cisco IOS compression solutions---accomplished with header compression for TCP/IP, per-interface compression (one set of dictionaries per hardware link), and per-virtual circuit compression (one set of dictionaries per compressed virtual circuit)

Security

Cisco's powerful suite of security technologies includes:

Network Address Translation (NAT) and Port Address Translation (PAT)---hides private topology and IP addresses from an external network
Digital Signature Standard (DSS) and digital certification---positively authenticates users or devices
IPSec---enables secure communications of data over public networks
Time-based Access Control Lists (ACLs)---to implement access lists based on the time of day
Terminal Access Controller Access Control System Plus (TACACS+) and Remote Access Dial-in User Service (RADIUS)---gives complete network access security for dial-in connections
Password Authentication Protocol (PAP)---allows a remote node to establish its identity using a two-way handshake
Challenge Handshake Authentication Protocol (CHAP)---allows a remote node to establish its identity using a three-way handshake
Calling line identification---uses calling line identification to compare the ISDN number of a calling device against a list of known callers
Access lists---checks source address of packets (standard access lists) and checks source and destination addresses and other parameters (extended access lists)
Context-based access control (CBAC)---provides secure, application-based stateful filtering for the most popular protocols and a wide variety of advanced applications; available in the Cisco IOS Firewall feature set

Multimedia Features

Cisco IOS network services that support multimedia applications with multimedia and multicast capabilities include:

RSVP---dynamically reserves end-to-end bandwidth for delay-sensitive IP traffic
IP Multicast-Protocol Independent Multicast (PIM)---a multicast protocol that can be used in conjunction with all unicast IP routing protocols
Internet Group Management Protocol (IGMP)---indicates to the router if any hosts on a given physical network belong to a multicast group
AppleTalk Simple Multicast Routing Protocol (SMRP)---provides connectionless, best-effort delivery of multicast datagrams

Quality of Service

Cisco IOS quality-of-service network services readily support bandwidth- intensive traffic:

Resource Reservation Protocol (RSVP)---establishes priority bandwidth allocation
Weighted Fair Queuing (WFQ)---adds new levels of control to previous queuing methods
Random Early Detection (RED)---monitors traffic levels on very large networks to prevent congestion and guarantee priority traffic delivery
Cisco IOS technologies that manage resource allocation include PIM, Private Network-Network Interface (PNNI), and available bit rate (ABR)

Cisco 700 Series

The Cisco 700 series ISDN router provides affordable, fast Internet access for every PC in a small office. It is recommended for small offices and home offices of up to five users.

Small offices that want to provide Internet access for every PC can use a single Cisco 700 and ISDN line, instead of multiple modems or TAs and multiple phone lines. Companies who choose to upgrade to ISDN with a Cisco 700 series router will increase the speed of their traditional analog modem connection by a factor of five.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 761M, 762M, 765M, 766M	Built-in NT1 for U.S. and Canada (Cisco 762M, 766M) Two plain old telephone service (POTS) interfaces to allow standard telephone, fax, or modem to share ISDN line (Cisco 765M, 766M)
Cisco 771M, 772M, 775M, 776M	Internet access for home offices A cost-effective, unmanaged hub Built-in NT1 for U.S. and Canada (Cisco 772M, 776M) Two POTS interfaces to allow standard telephone, fax, or modem to share ISDN line (Cisco 775M, 776M)
Cisco 761M-1CAPI, 775M-1CAPI	CAPI 2.0 applications and access to leading Internet Service Providers and online services including faxing, e-mail, and banking

Key Features

FastStep v1.2 wizard-based software enables efficient installation of Cisco 700 series routers connected to a PC running Windows 95 or NT
Optional 4-port hub and 2 POTS ports for all-in-one device supporting fax, phone, and up to 30 PCs (recommended for up to 5 users)
PAP, CHAP, PPP dialback, caller ID, and access lists provide more security than a modem or TA
Dynamic Host Configuration Protocol (DHCP) relay agent and server for dynamic addressing of attached workstations
NAT creates private network with hidden addresses
Two B-channels for phone or data with automatic B-channel aggregation with Multilink PPP; X.25 supported over the D channel
Reduces recurring ISDN usage charges with bandwidth optimization features such as compression, Bandwidth-on-Demand, Dial-on-Demand, and X.25 over D channel

Specifications

Cisco 760 Series

Feature	Cisco 761M	Cisco 762M	Cisco 765M	Cisco 766M
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)
Fixed WAN Ports (connections)	1-port ISDN BRI (S/T)	1-port ISDN BRI (U)	1-port ISDN BRI (S/T) 2-port POTS	1-port ISDN BRI (U) 2-port POTS
Modular Slots	None	None	None	None
Processor Speed (type)	25-MHz (80386)	25-MHz (80386)	25-MHz (80386)	25-MHz (80386)
Flash Memory	1 MB	1 MB	1 MB	1 MB
DRAM Memory	1.5 MB (default) 2 MB (max)	1.5 MB (default) 2 MB (max)	1.5 MB (default) 2 MB (max)	1.5 MB (default) 2 MB (max)
Dimensions (HxWxD)	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.
Service Category	1	1	1	1

Cisco 770 Series

Feature	Cisco 771M	Cisco 772M	Cisco 775M	Cisco 776M
Fixed LAN Ports (connections)	4-port Ethernet hub (10BaseT)	4-port Ethernet hub (10BaseT)	4-port Ethernet hub (10BaseT)	4-port Ethernet hub (10BaseT)
Fixed WAN Ports (connections)	1-port ISDN BRI (S/T)	1-port ISDN BRI (U)	1-port ISDN BRI (S/T) 2-port POTS	1-port ISDN BRI (U) 2-port POTS
Modular Slots	None	None	None	None
Processor Speed (type)	25-MHz (80386)	25-MHz (80386)	25-MHz (80386)	25-MHz (80386)
Flash Memory	1 MB	1 MB	1 MB	1 MB
DRAM Memory	1.5 MB (default) 2 MB (maximum)	1.5 MB (default) 2 MB (maximum)	1.5 MB (default) 2 MB (maximum)	1.5 MB (default) 2 MB (maximum)
Dimensions (HxWxD)	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.	1.6 x 8.3 x 9 in.
Service Category	1	1	1	1

Competitive Products

3Com: Office Connect LAN Modem
AVM: ISDN cards with KENI or Network Distributed ISDN software; ISDN cards with NetWare MultiProtocol Router for ISDN or MPR for ISDN Router Manager
Bay: Nautica 200 or 250
Bay: NetGear RT328 or RH348
Intel: Express ER8011
Netopia: R3100-UP or R3100U
Zyxel: Presige 100, 1001H, or 128 Plus

Cisco IOS Software and Memory Requirements

The Cisco 700 Series ships with the latest version of Cisco IOS software. No Feature Packs are needed.

Distribution Part Numbers and Ordering Information


Cisco 700 Series Router Chassis¹
CISCO761M	1-port 10bT, 1-port BRI (S/T)
CISCO762M-US	1-port 10bT, 1-port BRI (U) w/ NT-1
CISCO765M-US	1-port 10bT, 1-port BRI (S/T), 2 POTS ports
CISCO766M-US	1-port 10bT, 1-port BRI (U) w/ NT-1, 2 POTS ports
CISCO771M	4-port 10bT Hub, 1-port BRI (S/T)
CISCO772M	4-port 10bT Hub, 1-port BRI (U) w/ NT-1
CISCO775M	4-port 10bT Hub, 1-port BRI (S/T), 2 POTS ports
CISCO776M	4-port 10bT Hub, 1-port BRI (U) w/ NT-1, 2 POTS ports
CISCO761M-1CAPI	1-port 10bT, 1-port BRI (S/T), 1-user CAPI
CISCO775M-1CAPI	4-port 10bT Hub, 1-port BRI (S/T), 2 POTS ports, 1-user CAPI
Cisco 700 Series Memory Options
MEM760-512D=	Cisco 700 Series 0.5 MB DRAM Memory
Cisco 700 Series Software Upgrades for CISCO761M-1CAPI and CISCO775M-1CAPI
CD700-1CAPI-4.4=	Cisco 700 1-user Remote CAPI Software
CD700-5CAPI-4.4=	Cisco 700 5-user Remote CAPI Software
Cisco 700 Series Accessories
CAB-760-CON=	Cisco 700 Series Console Cable
Cisco 700 Series Basic Maintenance
CON-SNT-PKG1	Cisco 700 Series SMARTnet (8 x 5 x NBD)

¹For the latest part number and pricing information, see the Distribution Product Reference Guide Web site: http://www.cisco.com/dprg. (Only available in some countries at this time; worldwide rollout in place.)

For More Information

See the Cisco 700 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/700/

Cisco 800 Series

The Cisco 800 series router provides enhanced network security and reliability through the power of Cisco IOS software tailored for small offices and telecommuters. It is recommended for small offices of up to 20 users, connecting every user to the Internet or to the corporate LAN with one ISDN line. Those who will especially benefit from the Cisco 800 series routers are companies who have invested in Cisco IOS software at the head-end and want to add telecommuters; service providers who offer value-added services to small offices; and VARs who are familiar with Cisco IOS software and want a fast, profitable way to service small office customers.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 801	1 Ethernet and 1 ISDN Basic Rate Interface (BRI) S/T (for outside North America)
Cisco 802	1 Ethernet and 1 ISDN BRI U (for North America)
Cisco 803	4-port shared Ethernet hub, 2 analog POTS, and 1 ISDN BRI S/T (for outside North America)
Cisco 804	4-port shared Ethernet hub, 2 analog POTS, and 1 ISDN BRI U (for North America)
Cisco 805	Frame Relay, leased line (up to 512 kbps), or async dial-up access to the Internet

Key Features

Supports Cisco IOS software---the industry standard software that powers the Internet
Enhanced security with access control lists, PAT/NAT, PAP/CHAP, MS-CHAP, Lock and Key, Generic Routing Encapsulation (GRE) tunneling, and optional Cisco IOS Firewall Feature Pack and IPSec encryption
Enhanced network reliability with advanced routing protocols such as EIGRP for IP
Optional integrated 4-port hub and 2 analog POTs (802 and 804) for low cost of ownership with all-in-one capability with data, phone, and fax over one ISDN line
Reduces recurring ISDN usage charges on Cisco 801-804 with bandwidth optimization features such as compression, Bandwidth-on-Demand, Dial-on-Demand, Always-On-Dynamic-ISDN (AODI), and X.25 over D channel
Ease of use with FastStep v2.0 and ConfigMaker installation and monitoring software, color-matching cables, and dynamic IP addressing

Specifications

Feature	Cisco 801	Cisco 802	Cisco 803	Cisco 804	Cisco 805
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	4-port Ethernet hub (10BaseT)	4-port Ethernet hub (10BaseT)	1-port Ethernet (10BaseT)
Fixed WAN Ports (connections)	1-port ISDN BRI (S/T)	1-port ISDN BRI (U) NT-1	1-port ISDN BRI (S/T) 2-port POTS	1-port ISDN BRI (U) NT-1 2-port POTS	1-port serial (up to 512 kbps)
Modular Slots	None	None	None	None	None
Processor Speed (type)	33 MHz (MPC 850)	33 MHz (MPC 850)	33 MHz (MPC 850)	33 MHz (MPC 850)	33 MHz (MPC 850)
Flash Memory	8 MB (default) 12 MB (maximum)	8 MB (default) 12 MB (maximum)	8 MB (default) 12 MB (maximum)	8 MB (default) 12 MB (maximum)	4 MB (default) 12 MB (maximum)
DRAM Memory	4 MB (default) 12 MB (maximum)	4 MB (default) 12 MB (maximum)	4 MB (default) 12 MB (maximum)	4 MB (default) 12 MB (maximum)	8 MB (default) 16 MB (maximum)
Power Supply	External	External	External	External	External
Dimensions (HxWxD)	2.0 x 9.9 x 8.3 in.	2.0 x 9.9 x 8.3 in.	2.0 x 9.9 x 8.3 in.	2.0 x 9.9 x 8.3 in.	2.0 x 9.9 x 8.3 in.
Service Category	1	1	1	1	1

Competitive Products

3Com: Office Connect Remote 511/521
Ascend: Pipeline 75/85
Bay: Nautica 200
Intel: Express 8100

Cisco IOS Software and Memory

In distribution, the Cisco 801 - 804 ship with	In distribution, the Cisco 805 ships with
8-MB Flash memory	4-MB Flash memory
4-MB DRAM memory	8-MB DRAM memory

To run the Cisco IOS Feature Packs, you need, at a minimum, the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required DRAM Memory Required

CD08-C-12.0.5=

IP for 801-805

12.0(5)T or 12.0(4)Xm

801 - 804: 8 MB

805: 4 MB

801 - 804: 4 MB

805: 8 MB

CD08-CP-12.0.5=

IP Plus for 801-805

12.0(5)T or 12.0(4)Xm

801 - 804: 8 MB

805: 4 MB

801 - 804: 4 MB

805: 8 MB

CD08-BP-12.0.5=

IP/IPX Plus for 801-805

12.0(5)T or 12.0(4)Xm

801 - 804: 8 MB

805: 4 MB

801 - 804: 4 MB

805: 8 MB

CD08-CH-12.0.5=

IP/FW for 801-805

12.0(5)T or 12.0(4)Xm

801 - 804: 8 MB

805: 4 MB

801 - 804: 4 MB

805: 8 MB

CD08-BHP-12.0.5=

IP/FW Plus for 801-804

12.0(5)T or 12.0(4)Xm

8 MB

4 MB

CD08-CHL-12.0.5=

IP/FW Plus IPSec56 for 801-804

12.0(5)T or 12.0(4)Xm

8 MB

4 MB

CD08-BHL-12.0.5=

IP/IPX/FW Plus IPSec56 for 801-804

12.0(5)T or 12.0(4)Xm

8 MB

4 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required
CD08-C-12.0.5=	IP for 801-805	12.0(5)T or 12.0(4)Xm	801 - 804: 8 MB 805: 4 MB	801 - 804: 4 MB 805: 8 MB
CD08-CP-12.0.5=	IP Plus for 801-805	12.0(5)T or 12.0(4)Xm	801 - 804: 8 MB 805: 4 MB	801 - 804: 4 MB 805: 8 MB
CD08-BP-12.0.5=	IP/IPX Plus for 801-805	12.0(5)T or 12.0(4)Xm	801 - 804: 8 MB 805: 4 MB	801 - 804: 4 MB 805: 8 MB
CD08-CH-12.0.5=	IP/FW for 801-805	12.0(5)T or 12.0(4)Xm	801 - 804: 8 MB 805: 4 MB	801 - 804: 4 MB 805: 8 MB
CD08-BHP-12.0.5=	IP/FW Plus for 801-804	12.0(5)T or 12.0(4)Xm	8 MB	4 MB
CD08-CHL-12.0.5=	IP/FW Plus IPSec56 for 801-804	12.0(5)T or 12.0(4)Xm	8 MB	4 MB
CD08-BHL-12.0.5=	IP/IPX/FW Plus IPSec56 for 801-804	12.0(5)T or 12.0(4)Xm	8 MB	4 MB

Distribution Part Numbers and Ordering Information


Cisco 800 Series Routers¹
CISCO801	1-port 10bT, 1-port BRI (S/T), IP s/w
CISCO802	1-port 10bT, 1-port BRI (U) w/ NT-1, IP s/w
CISCO803	4-port 10bT Hub, 1-port BRI (S/T), 2-port POTS, IP s/w
CISCO804	4-port 10bT Hub, 1-port BRI (U) w/ NT-1, 2-port POTS, IP s/w
CISCO805	1-port 10bT, 1-port serial, IP s/w
Cisco 800 Series Software Feature Packs
CD08-C-12.0.5=	IP for Cisco 801-805
CD08-CP-12.0.5=	IP Plus for Cisco 801-805
CD08-BP-12.0.5=	IP/IPX Plus for Cisco 801-805
CD08-CH-12.0.5=	IP/FW for Cisco 801-805
CD08-BHP-12.0.5=	IP/FW Plus for Cisco 801-804
CD08-CHL-12.0.5=	IP/FW Plus IPSec56 for Cisco 801-804
CD08-BHL-12.0.5=	IP/IPX/FW Plus IPSec56 for Cisco 801-804
Cisco 800 Series Memory Options
MEM800-4F=	Cisco 800 Series, 4 MB Flash Mini-Card
MEM800-8F=	Cisco 800 Series, 8 MB Flash Mini-Card
MEM800-4D=	Cisco 800 Series, 4 MB DRAM DIMM
MEM800-8D=	Cisco 800 Series, 8 MB DRAM DIMM
Cisco 800 Series Accessories
PWR-800-WW1=	Cisco 800 Series, AC Power Supply Spare
PWR-805-WW1=	Cisco 805 Series, AC Power Supply Spare
Cisco 800 Series Basic Maintenance
CON-SNT-PKG1	SMARTnet Maintenance (8x5xNBD)

For More Information

See the Cisco 800 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/800/

Cisco 1000 Series

The Cisco 1000 series of compact, fixed-configuration desktop routers provides low-cost, high-speed connectivity for branch and small offices. These products offer a range of synchronous and asynchronous WAN options to address a variety of needs and fit seamlessly into any networking environment.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 1003	Inexpensive, easy-to-install and manage, multiprotocol routing for small remote sites ISDN (BRI S/T) port, 10BaseT Ethernet port, console port, and slot for a Flash RAM card Software features that extend to support IP, IPX, and AppleTalk routing
Cisco 1004	The same features as Cisco 1003, plus an integrated NT1 device, reducing the number of devices needed to connect to ISDN lines in North America
Cisco 1005	Inexpensive, fixed configuration, easy to install and manage, multiprotocol routing for small remote sites Serial port with synchronous speeds up to 2.048 Mbps, 10BaseT Ethernet port, console port, and slot for Flash RAM card Software features that extend to support IP, IPX, and AppleTalk routing

Key Features

Support for Cisco IOS software
Integration with enterprise networks that are based on asynchronous serial lines, leased lines, Frame Relay, Switched 56, and X.25 services (Cisco 1005) or ISDN (Cisco 1003 and 1004)
Flash Memory (PC Card) and primary memory upgrade capability for easy software image maintenance
Products tailored for easy inventory, installation, operation, and maintenance
Setup with Cisco ConfigMaker, a free tool for configuring a network of routers
With CiscoWorks Windows, provides centralized router management and remote maintenance

Specifications

Feature	Cisco 1003 ISDN Router	Cisco 1004 ISDN Router	Cisco 1005 Serial Router
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)
Fixed WAN Ports (connections)	1-port ISDN BRI (S/T)	1-port ISDN BRI (U)	1-port sync serial (DB-60)
Modular Slots	None	None	None
Processor Speed (type)	25 MHz (MC68360)	25 MHz (MC68360)	25 MHz (MC68360)
Flash Memory	2 MB (default) 4 MB card optional	2 MB (default) 4 MB card optional	2 MB (default) 4 MB card optional
DRAM Memory	8 MB (default)	8 MB (default)	8 MB (default)
Dimensions (HxWxD)	1.75 x 8 x 8.3 in.	1.75 x 8 x 8.3 in.	1.75 x 8 x 8.3 in.
Service Category	2	2	2

Cisco IOS Software and Memory Requirements

The Cisco 1000 Series in distribution ships with:

2-MB Flash memory
8-MB DRAM memory

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required
CD10-C-11.3=	IP only	11.3 (5)	2 MB	4 MB
CD10-A/B/E-11.3=	IP/IPX/AT	11.3 (5)	2 MB	8 MB
CD10-AP-11.3=	IP/IPX/AT Plus	11.3 (5)	2 MB	8 MB
CD10-AW-11.3=	IP/IPX/AT/ Plus 40	11.3 (5)	2 MB	8 MB
CD10-AY-11.3=	IP/IPX/AT/ Plus 56	11.3 (5)	2 MB	8 MB

Distribution Part Numbers and Ordering Information


Cisco 1000 Series Chassis¹
CISCO1003-CH	1-port 10bT, 1-port BRI (S/T)
CISCO1004-CH	1-port 10bT, 1-port BRI (U) w/ NT1
CISCO1005-CH	1-port 10bT, 1-port Serial, IP s/w
Cisco 1000 Series Software Feature Packs
CD10-C-11.3=	Cisco 1000 Series, IP only Feature Pack
CD10-A/B/E-11.3=	Cisco 1000 Series, IP/IPX/AT Feature Pack
CD10-AP-11.3=	Cisco 1000 Series, IP/IPX/AT Plus Feature Pack
CD10-AW-11.3=	Cisco 1000 Series, IP/IPX/AT Plus with 40-Bit Encryption Feature Pack
CD10-AY-11.3=	Cisco 1000 Series, IP/IPX/AT Plus with 56-Bit Encryption Feature Pack
Cisco1000 Series Memory Options
MEM-1000-2MF=	Cisco 1000 Series, 2 MB Flash Card
MEM-1000-4MF=	Cisco 1000 Series, 4 MB Flash Card
MEM-1000-8MD=	Cisco 1000 Series, 8 MB DRAM SIMM
Cisco 1000 Series Accessories
CAB-1000-CON=	Cisco 1000 Series, Console Cable
Cisco 1000 Series Basic Maintenance
CON-SNT-PKG2	Cisco 1000 Series SMARTnet (8 x 5 x NBD)

For More Information

See the Cisco 1000 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/1000/

Cisco 1400 Series ¹

For small businesses or small branch offices that need to connect seamlessly to the Internet or to corporate networks, the Cisco 1400 Series routers provide high-performance connectivity from Ethernet to DSL-based WAN infrastructures. The Cisco 1401 ATM25 WAN router provides high-performance connectivity from Ethernet to ATM cell-based WAN infrastructure and allows an external demarcation point as required by telcos. The Cisco 1417 provides direct connectivity to market-leading DSLAM products that support the ANSI T1.413 standard (such as the Alcatel ASAM, for example). The 1400 series is part of Cisco's end-to-end DSL solutions.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 1401	Flexibility in connecting to several different flavors of legacy xDSL modems (ADSL, HDSL, or SDSL). Allows for connectivity to an ATM cell-based WAN infrastructure. ATM25 interface provides an external demarcation point as required by many telcos and can be combined with an external ATM 25 asymmetric DSL (ADSL) modem to provide high-speed Internet/intranet access up to 8 Mbps.
Cisco 1417	Connection to DSL access multiplexors (DSLAMs) which implement the ANSI ADSL DMT Issue-2 specification, such as the Alcatel DMT Issue 2 DSLAMs. Features an integrated ADSL DMT Issue 2 ATU-R, with integrated ATM capabilities.

Key Features

DSL for high-speed Internet/intranet access
Powered by Cisco IOS software, the industry's most robust, scalable, and feature-rich internetworking software
Quality of Service (QoS) for high-performance applications such as Video-on-Demand (VoD), desktop video conferencing, and distance learning
Advanced security with optional integrated IOS Firewall software
VPN-capable router with IPSec and encryption

Specifications

Feature	Cisco 1401	Cisco 1417
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT), RJ-45	1-port Ethernet (10BaseT), RJ-45
Fixed WAN Ports (connections)	1-port ATM-25	1-port ADSL (DMT-2), RJ-11
Processor Speed (type)	33 MHz (68360)	33 MHz (68360)
Flash Memory	4 MB (default); 16 MB (maximum)	4 MB (default); 16 MB (maximum)
DRAM Memory	16 MB (default); 16 MB (maximum)	16 MB (default); 16 MB (maximum)
Dimensions (HxWxD)	1.9 x 11.5 x 10.56 in.	1.9 x 11.5 x 10.56 in.

Competitive Products

Ascend: Cell Pipe 50A
Cayman: ADSL 3220
Efficient: Speed Stream 5660
Flowpoint: Smart Switch Router 250 (also sold under Alcatel and Cabletron brands)
Zyxel: Prestige 641

For More Information

See the Cisco 1400 Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/1400/

Cisco 1600 Series

The Cisco 1600 is the proven choice for flexible Internet/intranet access for small branch offices and small businesses. In addition to one fixed WAN port and one Ethernet port, the Cisco 1600 models support one WAN interface card, which allows customers to add or change WAN ports as needed. WAN options include ISDN, leased lines (T1/E1), Frame Relay, Switched 56, Switched Multimegabit Data Service (SMDS), and X.25.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 1601 R	One serial port with synchronous performance up to T1/E1 speeds for Frame Relay, leased line, Switched 56, SMDS, and X.25 WAN services, or async performance up to 115.2 kbps Higher speeds than ISDN or Switched 56 kbps
Cisco 1602 R	A 56-kbps serial port (Frame Relay, leased line, Switched 56, SMDS, and X.25) Low-cost integrated channel service unit (CSU)/data service unit (DSU) at 56 kbps Ability to get CSU/DSU diagnostics information and configuration remotely via Cisco IOS command-line interface
Cisco 1603 R and 1604 R	ISDN (BRI) and ISDN leased-line connectivity Built-in NT1 for U.S. and Canada (Cisco 1604)
Cisco 1605 R	Two Ethernet ports to isolate internal secure LAN from perimeter LAN (exposed to Internet) Single flexible WAN connection (any WAN interface card)

Key Features

Support for Cisco IOS software
Modular WAN interface card slot for adding and changing WAN connections for flexibility and investment protection
Optional firewall and virtual private network software
Optional integrated DSU/CSU up to T1 speed and integrated NT1 for North America
Flash Memory (PC Card) and primary memory upgrade capability for easy software image maintenance
FastStep configuration utility, GUI-based software for easy setup and troubleshooting
Setup with Cisco ConfigMaker, a free tool for configuring a network of routers

Specifications

Feature	Cisco 1601 R	Cisco 1602 R	Cisco 1603 R	Cisco 1604 R	Cisco 1605 R
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	1-port Ethernet (10BaseT)	2-ports Ethernet (10BaseT)
Fixed WAN Ports (connections)	1-port sync/async serial	1-port sync serial, 56 kbps 4-wire DSU/CSU	1-port ISDN BRI (S/T)	1-port ISDN BRI (U)	None
WAN Card Slots	1	1	1	1	1
WAN Interface Card Modules	1-port ISDN BRI (S/T) 1-port ISDN BRI (U) 1-port sync/async serial 1-port serial w/ 56/64 CSU 1-port serial w/ FT1/T1 CSU	Same as Cisco 1601 R	1-port ISDN BRI (S/T) for leased line 1-port sync/async serial 1-port serial w/ 56/64 CSU 1-port serial w/ FT1/T1 CSU	1-port ISDN BRI (S/T) for leased line 1-port sync/async serial 1-port serial w/ 56/64 CSU 1-port serial w/ FT1/T1 CSU	Same as Cisco 1601 R
Processor Speed	33 MHz (68360)	33 MHz (68360)	33 MHz (68360)	33 MHz (68360)	33 MHz (68360)
Flash Memory	4 MB (default) 16 MB (max)	Same as Cisco 1601 R	Same as Cisco 1601 R	Same as Cisco 1601 R	Same as Cisco 1601 R
DRAM Memory	8 MB (default) 24 MB (max)	Same as Cisco 1601 R	Same as Cisco 1601 R	Same as Cisco 1601 R	Same as Cisco 1601 R
Dimensions (HxWxD)	2.19 x 11.15 x 8.67 in.	2.19 x 11.15 x 8.67 in.	2.19 x 11.15 x 8.67 in.	2.19 x 11.15 x 8.67 in.	2.19 x 11.15 x 8.67 in.
Service Category	2	2	2	2	2

Competitive Products

3Com: NETBuilder 1xx, 22x, 422
Ascend: Pipeline 130, 220
Bay: AN, Nautica Clam

Cisco IOS Software and Memory Requirements

The Cisco 1600 Series in distribution ships with:

4-MB Flash memory
8-MB DRAM memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required¹ DRAM Memory Required1

CD16-C-12.0=

IP only

12.0(3) or 12.0(3)T

4 MB

8 MB

CD16-CP-12.0=

IP Plus

12.0(3) or 12.0(3)T

4 MB

10 MB

CD16-CW-12.0=

IP Plus 40

12.0(3) or 12.0(3)T

4 MB

10 MB

CD16-CY-12.0=

IP Plus 56

12.0(3) or 12.0(3)T

4 MB

10 MB

CD16-CL-12.0=

IP Plus IPSec 56

12.0(3) or 12.0(3)T

4 MB

12 MB

CD16-CH-12.0=

IP/Firewall

12.0(3) or 12.0(3)T

4 MB

8 MB

CD16-CHL-12.0=

IP/Firewall Plus IPSec 56

12.0(3) or 12.0(3)T

4 MB

12 MB

CD16-B-12.0=

IP/IPX

12.0(3) or 12.0(3)T

4 MB

8 MB

CD16-BPH-12.0=

IP/IPX/Firewall Plus

12.0(3) or 12.0(3)T

4 MB

10 MB

CD16-Q-12.0=

IP/IPX/AT/IBM

12.0(3) or 12.0(3)T

4 MB

12 MB

CD16-QHL-12.0=

IP/IPX/AT/IBM/Firewall Plus IPSec 56

12.0(3) or 12.0(3)T

6 MB

16 MB

CD16-QP-12.0=

IP/IPX/AT/IBM Plus

12.0(3) or 12.0(3)T

6 MB

16 MB

¹Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required¹	DRAM Memory Required1
CD16-C-12.0=	IP only	12.0(3) or 12.0(3)T	4 MB	8 MB
CD16-CP-12.0=	IP Plus	12.0(3) or 12.0(3)T	4 MB	10 MB
CD16-CW-12.0=	IP Plus 40	12.0(3) or 12.0(3)T	4 MB	10 MB
CD16-CY-12.0=	IP Plus 56	12.0(3) or 12.0(3)T	4 MB	10 MB
CD16-CL-12.0=	IP Plus IPSec 56	12.0(3) or 12.0(3)T	4 MB	12 MB
CD16-CH-12.0=	IP/Firewall	12.0(3) or 12.0(3)T	4 MB	8 MB
CD16-CHL-12.0=	IP/Firewall Plus IPSec 56	12.0(3) or 12.0(3)T	4 MB	12 MB
CD16-B-12.0=	IP/IPX	12.0(3) or 12.0(3)T	4 MB	8 MB
CD16-BPH-12.0=	IP/IPX/Firewall Plus	12.0(3) or 12.0(3)T	4 MB	10 MB
CD16-Q-12.0=	IP/IPX/AT/IBM	12.0(3) or 12.0(3)T	4 MB	12 MB
CD16-QHL-12.0=	IP/IPX/AT/IBM/Firewall Plus IPSec 56	12.0(3) or 12.0(3)T	6 MB	16 MB
CD16-QP-12.0=	IP/IPX/AT/IBM Plus	12.0(3) or 12.0(3)T	6 MB	16 MB

Distribution Part Numbers and Ordering Information


Cisco 1600 Series Router Chassis¹
CISCO1601-R	Cisco 1601 R Ethernet/Serial Modular Router
CISCO1602-R	Cisco 1602 R Ethernet/ISDN-BRI Modular Router w/56k DSU 4-wire
CISCO1603-R	Cisco 1603 R Ethernet/ISDN-BRI Modular Router
CISCO1604-R	Cisco 1604 R Eth/BRI Modular Router w/ NT1
CISCO1605-R	Cisco 1605 R Dual Ethernet/WAN Interface Card Slot Router
Cisco 1600 Series WAN Interface Cards (WICs)
WIC-1B-S/T=	1-port BRI (S/T) WAN Interface Card (Dial & Leased Line)
WIC-1B-U=	1-port BRI (U) w/ NT-1 WAN Interface Card (Dial & Leased Line)
WIC-1B-S/T-LL=	1-port BRI Leased Line WAN Interface Card (1603/1604 only)
WIC-1DSU-56K4=	1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
WIC-1DSU-T1=	1-port Serial w/ T1/FrT1 DSU/CSU WAN Interface Card
WIC-1T=	1-port Serial WAN Interface Card
Cisco 1600 Series Software Feature Packs
CD16-C-12.0=	Cisco 1600 Series, IP only Feature Pack
CD16-CP-12.0=	Cisco 1600 Series, IP Plus Feature Pack
CD16-CW-12.0=	Cisco 1600 Series, IP Plus 40 Feature Pack
CD16-CY-12.0=	Cisco 1600 Series, IP Plus 56 Feature Pack
CD16-CL-12.0=	Cisco 1600 Series, IP Plus IPSec 56 Feature Pack
CD16-CH-12.0=	Cisco 1600 Series, IP/Firewall Feature Pack
CD16-CHL-12.0=	Cisco 1600 Series, IP/Firewall Plus IPSec 56 Feature Pack
CD16-B-12.0=	Cisco 1600 Series, IP/IPX Feature Pack
CD16-BHP-12.0=	Cisco 1600 Series, IP/IPX/Firewall Plus Feature Pack
CD16-Q-12.0=	Cisco 1600 Series, IP/IPX/AT/IBM Feature Pack
CD16-QHL-12.0=	Cisco 1600 Series, IP/IPX/AT/IBM/Firewall Plus IPSec 56 Feature Pack
CD16-QP-12.0=	Cisco 1600 Series, IP/IPX/AT/IBM Plus Feature Pack
Cisco1600 Series Memory Options
MEM1600-4FC=	Cisco 1600 Series, 4 MB Flash Card
MEM1600-6FC=	Cisco 1600 Series, 6 MB Flash Card
MEM1600-8FC=	Cisco 1600 Series, 8 MB Flash Card
MEM1600-12FC=	Cisco 1600 Series, 12 MB Flash Card
MEM1600-16FC=	Cisco 1600 Series, 16 MB Flash Card
MEM1600-2D=	Cisco 1600 Series, 2 MB DRAM SIMM
MEM1600-4D=	Cisco 1600 Series, 4 MB DRAM SIMM
MEM1600-8D=	Cisco 1600 Series, 8 MB DRAM SIMM
MEM1600-16D=	Cisco 1600 Series, 16 MB DRAM SIMM
Cisco 1600 Series Accessories
CAB-1600-CON=	Cisco 1600 Series, Console Cable
PWR-1600-WW1=	Cisco 1600 Series, AC Power Supply (Worldwide)
WIC-BLANK-PANEL=	Blank WAN Interface Card (WIC) Panel
Cisco 1600 Series Basic Maintenance
CON-SNT-PKG2	Cisco 1600 Series SMARTnet Maintenance

For More Information

See the Cisco 1600 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/1600/

Cisco 1720 Access Router

The Cisco 1720 access router delivers a flexible, integrated solution for small/medium businesses and small branch offices that want to deploy secure Internet, intranet, and extranet access. The Cisco 1720 is a fully modular solution that provides the access router, optional high-speed encryption, a VPN tunnel server, IPSec, and a dynamic firewall. This "all-in-one" solution enables you to minimize your setup costs and reduce the ongoing time and expense required to manage the network.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 1720	An integrated routing solution that delivers optimized security and flexibility in a desktop form factor for small/medium businesses or small branch offices interested in deploying Internet, intranet, and extranet access Modular WAN slots to support future growth by providing upgradeable WAN services and higher densities of WAN connections Features and performance to support new world services including VPNs and broadband technologies Support for encrypted WAN performance greater than 128 kbps Router configurations that require two ISDN BRI interfaces An autosensing 10/100 Mbps Fast Ethernet LAN connection to provide easy upgrade to Fast Ethernet

Sell This Product

When a Customer Needs These Features

Cisco 1720

An integrated routing solution that delivers optimized security and flexibility in a desktop form factor for small/medium businesses or small branch offices interested in deploying Internet, intranet, and extranet access
Modular WAN slots to support future growth by providing upgradeable WAN services and higher densities of WAN connections
Features and performance to support new world services including VPNs and broadband technologies
Support for encrypted WAN performance greater than 128 kbps
Router configurations that require two ISDN BRI interfaces
An autosensing 10/100 Mbps Fast Ethernet LAN connection to provide easy upgrade to Fast Ethernet

Key Features

Cisco IOS software
Two modular WAN slots that support the same data WIC cards as the Cisco 1600, 2600, and 3600 for flexibility and investment protection
Support for up to four serial interfaces or two ISDN BRI
One autosensing 10/100 Mbps Fast Ethernet LAN connection
One auxiliary (AUX) port for dial-up management or low-speed asynchronous connections (up to 112.5 kbps)
An expansion slot on the motherboard to support future hardware-assisted encryption
Optional integrated DSU/CSU up to T1 speed and integrated NT1 for North America
Optional integrated Cisco IOS Firewall and virtual private network software for encryption, tunneling, and quality of service

Specifications

Feature	Cisco 1720
Fixed LAN Ports (connections)	1-port autosensing 10/100 Mbps Ethernet (10/100BaseT)
Fixed WAN Ports	None
Modular WAN Slots	2
WAN Interface Cards (WICs)	1-port serial sync/async 2-port serial sync/async 2-port low-speed serial (up to 128 kbps) 1-port ISDN BRI S/T 1-port ISDN BRI U with integrated NT-1 1-port serial with integrated 56/64 kbps DSU/CSU 1-port serial with integrated T1/Fractional T1 DSU/CSU
Voice Interface Cards (VICs)	None
Processor Speed (type)	50 MHz (Motorola MPC860T Power QUICC)
Flash Memory	4 MB (default): 16 MB (max)
DRAM Memory	16 MB (default); 48 MB (max)
Dimensions (HxWxD)	3.1 x 11.2 x 8.7 in.
Service Category	4

Competitive Products

3Com: OfficeConnect NETBuilder
Ascend: Pipeline 130
Bay: AN
Freegate: Multiservice Internet Gateway

Cisco IOS Software and Memory Requirements

In distribution the Cisco 1720 ships with

4-MB Flash memory
16-MB DRAM memory

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required
CD17-C-12.0x=	IP only	12.0 (1)XA	4 MB	16 MB
CD17-CH-12.0x=	IP/Firewall	12.0 (1)XA	4 MB	16 MB
CD17-CHL-12.0x=	IP/Firewall Plus IPSec 56	12.0 (1)XA	4 MB	20 MB
CD17-B-12.0x=	IP/IPX	12.0 (1)XA	4 MB	16 MB
CD17-Q-12.0x=	IP/IPX/AT/IBM	12.0 (1)XA	4 MB	20 MB

Distribution Part Numbers and Ordering Information


Cisco 1720 Router Chassis¹
CISCO1720	1-port 10/100 (autosensing), 2 WAN slots, IP s/w
Cisco 1720 Software Feature Packs
CD17-C-12.0X=	Cisco 1700 Series, IP only Feature Pack
CD17-CH-12.0X=	Cisco 1700 Series, IP/Firewall Feature Pack
CD17-B-12.0X=	Cisco 1700 Series, IP/IPX Feature Pack
CD17-Q-12.0X=	Cisco 1700 Series, IP/IPX/AT/IBM Feature Pack
CD17-QHK2-12.0=	Cisco 1700 Series, IP/IPX/AT/IBM/FW Plus 3DES Feature Pack
CD17-BHP-12.0=	Cisco 1700 Series, IP/IPX/Firewall PLUS Feature Pack
CD17-CW-12.0=	IP Plus 40 Feature Pack
CD17-CY-12.0=	IP Plus 56 Feature Pack
CD17-CP-12.0=	IP Plus Feature Pack
CD17-CK2-12.0=	IP Plus IPSec 3DES Feature Pack
CD17-QHL-12.0=	IP/IPX/AT/IBM/Firewall PLUS IPSec 56 Feature Pack
Cisco 1720 Memory Options
MEM-1700-4MFC=	Cisco 1700 Series, 4 MB Mini-Flash Card
MEM-1700-8MFC=	Cisco 1700 Series, 8 MB Mini-Flash Card
MEM-1700-16MFC=	Cisco 1700 Series, 16 MB Mini-Flash Card
MEM-1700-4D=	Cisco 1700 Series, 4 MB DRAM DIMM
MEM-1700-8D=	Cisco 1700 Series, 8 MB DRAM DIMM
MEM-1700-16D=	Cisco 1700 Series, 16 MB DRAM DIMM
MEM-1700-32D=	Cisco 1700 Series, 32 MB DRAM DIMM
MEM1700-4U8MFC=	Cisco 1700 series, 4MB to 8MB Mini-Flash Card Upgrade
Cisco 1720 WAN Interface Cards (WICs)
WIC-2T	2-port Serial WAN Interface Card
WIC-2A/S	2-port Async/Sync Serial WAN Interface Card
WIC-1DSU-T1	1-port T1/Fr T1 w/ (DSU/CSU) WAN Interface Card
WIC-1DSU-56K	1-port 4-Wire 56/64 Kbps w/ (DSU/CSU) WAN Interface Card
WIC-1B-U	1-port BRI w/ NT-1 WAN Interface Card (dial and leased line)
WIC-1B-S/T	1-port BRI (S/T) WAN Interface Card (dial and leased line)
Cisco 1720 Basic Maintenance
CON-SNT-PKG4	Cisco 1720 Series SMARTnet Maintenance

For More Information

See the Cisco 1720 Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/1700/

Cisco 2500 Series

The Cisco 2500 series of routers, the world's most popular brand of branch office router, provides a wide variety of models to suit a broad range of data-networking needs. These routers are typically fixed configuration with at least two of the following interfaces: Ethernet Token Ring, synchronous serial, asynchronous serial, ISDN BRI, and 10Base-T hub ports. Two modular models are also available.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 2500 Series	Data-only network requirement
Cisco 2501, 2502, 2503, 2504	Multiprotocol routing between WANs and LANs A single Ethernet LAN and dual serial ports (Cisco 2501, 2503) A single Token Ring LAN and dual serial ports (Cisco 2502, 2504) An ISDN BRI S/T interface (Cisco 2503, 2504)
Cisco 2513, 2514, 2515	Dual LAN configuration for network segmentation or security (physical firewall) A single Ethernet port, a single Token Ring port, and dual serial ports (Cisco 2513) Dual Ethernet ports and dual serial ports (Cisco 2514) Dual Token Ring and dual serial ports (Cisco 2515)
Cisco 2505, 2507, 2516	Multiprotocol routing with integrated 10BaseT hubs and dual serial ports An ISDN BRI S/T interface (Cisco 2516)
Cisco 2509, 2511, 2512, AS2509-RJ, AS2511-RJ	An access server combining a terminal server, protocol translator, and a router in a single device One Ethernet LAN and dual serial ports One Token Ring and two synch serial ports (Cisco 2512) 8- or 16-port asynchronous External cable assembly (Cisco 2509, 2511) RJ-11 jacks integrated in unit (AS2509-RJ, AS2511-RJ)
Cisco 2520, 2521, 2522, 2523	WAN aggregation routers that can be used as communication servers A single Ethernet LAN, ISDN BRI S/T, and dual sync/multiple sync/async serial ports (Cisco 2520, 2522) A single Token Ring LAN, ISDN BRI S/T, and dual sync/multiple sync/async serial ports (Cisco 2521, 2523) High-density asynchronous ports (Cisco 2522, 2523)
Cisco 2524, 2525	Modular WAN connectivity for flexibility to support Switched 56, fractional T1/T1, sync serial, and ISDN

Key Features

Proven technology with a full suite of Cisco IOS software
Setup with Cisco ConfigMaker, a free tool for configuring a network of routers
With CiscoWorks Windows, allows remote management and maintenance from a central location

Specifications

Cisco 2500 Series---All Models

Feature	Specifications
Processor Speed (type)	20 MHz (68030)
Flash Memory	8-MB dual Flash bank option (default) 16 MB (max)


DRAM Memory	4 MB, upgrades to 8 or 16 MB
Power Supply	AC, with optional DC or redundant power supply (RPS)

Cisco 2500 Series---Single LAN Routers (fixed configurations)

Feature	Cisco 2501	Cisco 2502	Cisco 2503	Cisco 2504
Fixed LAN Ports	1-port Ethernet	1-port Token Ring	1-port Ethernet	1-port Token Ring
Fixed WAN Ports	2-port sync serial	2-port sync serial	2-port sync serial 1-port ISDN BRI (S/T)	2-port sync serial 1-port ISDN BRI (S/T)
Slots	None	None	None	None
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	4	4	⁴	4

Cisco 2500 Series---Router/Hub Combinations (fixed configurations)

Feature	Cisco 2505	Cisco 2507	Cisco 2516
Fixed LAN Ports	8-port Ethernet hub	16-port Ethernet hub	14-port Ethernet hub
Fixed WAN Ports (connections)	2-port sync serial	2-port sync serial	2-port sync serial 1-port ISDN BRI (S/T)
Slots	None	None	None
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	4	4	5

Cisco 2500 Series---Access Servers (fixed configurations)

Feature	Cisco 2509	AS 2509-RJ	Cisco 2511	AS 2511-RJ	Cisco 2512
Fixed LAN Ports (connections)	1-port Ethernet	1-port Ethernet	1-port Ethernet	1-port Ethernet	1-port Token Ring
Fixed WAN Ports (connections)	2-port sync serial 8-port async	1-port sync serial 8-port async	2-port sync serial 16-port async	1-port sync serial 16-port async	2-port sync serial
Slots	None	None	None	None	None
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	4	4	4	4	4

Cisco 2500 Series---High-Density Serial Routers (fixed configurations)

Feature	Cisco 2520	Cisco 2521	Cisco 2522	Cisco 2523
Fixed LAN Ports	1-port Ethernet	1-port Token Ring	1-port Ethernet	1-port Token Ring
Fixed WAN Ports (connections)	2-port high-speed sync serial 1-port ISDN BRI (S/T) 2-port low-speed sync/async serial	Same as Cisco 2520	2-port sync serial 1-port ISDN BRI (S/T) 8-port sync/async serial	Same as Cisco 2522
Slots	None	None	None	None
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	4	4	4	5

Cisco 2500 Series---Dual LAN Routers (fixed configurations)

Feature	Cisco 2513	Cisco 2514	Cisco 2515
Fixed LAN Ports	1-port Ethernet 1-port Token Ring	2-port Ethernet	2-port Token Ring
Fixed WAN Ports	2-port sync serial	2-port sync serial	2-port sync serial
Slots	None	None	None
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	4	4	5

Cisco 2500 Series---Single LAN Routers (modular configurations)

Feature	Cisco 2524	Cisco 2525
Fixed LAN Ports	1-port Ethernet	1-port Token Ring
Fixed WAN Ports	None	None
LAN Modules	None	None
WAN Modules	1-port ISDN BRI (S/T) or 1-port ISDN BRI (U) Plus any two of the following: 1-port 2-wire Switched 56 DSU/CSU 1-port 4-wire 56K/64K DSU/CSU 1-port fractional/full T1 DSU/CSU 1-port sync serial (5-in-1 cable adapter)	Same as Cisco 2524
Dimensions (HxWxD)	1.75 x 17.5 x 10.56 in.	1.75 x 17.5 x 10.56 in.
Service Category	5	5

Competitive Products

3Com: SuperStack NETBuilder
Bay Networks: Advanced Node (AN)
IBM: 2210

Cisco IOS Software and Memory

The 2500 Series in distribution ships with:

8-MB Flash memory
4-MB DRAM memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required¹ DRAM Memory Required1

CD25-C-11.3(9)=

IP only

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

4 MB

4 MB

4 MB

CD25-CH-11.3(9)=

IP/Firewall

11.3(9)T

8 MB

6 MB

CD25-CP-11.3(9)=

IP Plus

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

4 MB

4 MB

4 MB

CD25-CY-11.3(9)=

IP Plus 56

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

4 MB

4 MB

4 MB

CD25-CL-11.3(9)=

IP Plus IPSec 56

11.3(9)T

8 MB

4 MB

CD25-B-11.3(9)=

IP/IPX/AT/DEC

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

4 MB

4 MB

4 MB

CD25-BP-11.3(9)=

IP/IPX/AT/DEC Plus

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

6 MB

6 MB

6 MB

CD25-AP-11.3(9)=

Enterprise Plus

11.2(18)

11.3(9)

11.3(9)T

8 MB

16 MB

16 MB

6 MB

6 MB

6 MB

CD25-AL-11.3(9)=

Enterprise Plus IPSec 56

11.3(9)T

16 MB

8 MB

CD25-E-11.3(9)=

Remote access server

11.2(18)

11.3(9)

11.3(9)T

8 MB

8 MB

8 MB

4 MB

6 MB

6 MB

¹Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.

Distribution Part Numbers and Ordering Information


Cisco 2500 Series Router Chassis¹
CISCO2501-CH	1-port Ethernet AUI, 2-port Serial, IP s/w
CISCO2502-CH	1-port Token Ring, 2-port Serial, IP s/w
CISCO2503-CH	1-port Ethernet AUI, 2-port Serial, 1-port BRI (S/T), IP s/w
CISCO2504-CH	1-port Token Ring, 2-port Serial, 1-port BRI (ST), IP s/w
CISCO2505-CH	8-port 10bT hub, 2-port Serial, IP s/w
CISCO2507-CH	16-port 10bT hub, 2-port Serial, IP s/w
CISCO2513-CH	1-port Ethernet AUI, 1-port Token Ring, 2-port Serial, IP s/w
CISCO2514-CH	2-port Ethernet AUI, 2-port Serial, IP s/w
CISCO2515-CH	2-port Token Ring, 2-port Serial, IP s/w
CISCO2516-CH	14-port 10bT hub, 2-port Serial, 1-port BRI (S/T), IP s/w
CISCO2520-CH	1-port Ethernet AUI, 2-port Serial, 1-port BRI (S/T), 2-port Async/Sync Serial, IP s/w
CISCO2521-CH	1-port Token Ring, 2-port Serial, 1-port BRI (S/T), 2-port Async/Sync Serial, IP s/w
CISCO2522-CH	1-port Ethernet AUI, 2-port Serial, 1-port BRI (S/T), 8-port Async/Sync Serial, IP s/w
CISCO2523-CH	1-port Token Ring, 2-port Serial, 1-port BRI (S/T), 8-port Async/Sync Serial, IP s/w
CISCO2524-CH	1-port Ethernet AUI, 3 slots (1 for BRI Mod, 2 for Serial Mods), IP s/w
CISCO2525-CH	1-port Token Ring, 1 BRI slot, 2 Serial slots, IP s/w
Cisco 2524/2525 WAN Modules
SM25-BRI-S/T=	1-port BRI (S/T) Module
SM25-BRI-U=	1-port BRI (U) w/ NT-1 Module
SM25-56K2=	1-port Serial w/ 2-Wire 56Kbps DSU/CSU Interface Module
SM25-56K4=	1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU Interface Module
SM25-T1=	1-port Serial w/ FrT1/T1 DSU/CSU Module
SM25-5IN1=	1-port Serial 5-in-1 Interface Module
Cisco 2500 Series Access Router Chassis
CISCO2509-CH	1-port Ethernet AUI, 2-port Serial, 8-port Async Serial, IP s/w
AS2509-RJ-CH	1-port Ethernet AUI (RJ-45), 1-port Serial, 8-port Async Serial, IP s/w
CISCO2511-CH	1-port Ethernet AUI, 2-port Serial, 16-port Async Serial, IP s/w
AS2511-RJ-CH	1-port Ethernet AUI (RJ-45), 1-port Serial, 16-port Async Serial, IP s/w
Cisco 2500 Series Software Feature Packs
CD25-C-11.3=	Cisco 2500 Series, IP only Feature Pack
CD25-CH-11.3=	Cisco 2500 Series, IP/Firewall Feature Pack
CD25-CP-11.3=	Cisco 2500 Series, IP Plus Feature Pack
CD25-CY-11.3=	Cisco 2500 Series, IP Plus 56 Feature Pack
CD25-CL-11.3=	Cisco 2500 Series, IP Plus IPSec 56 Feature Pack
CD25-B-11.3=	Cisco 2500 Series, IP/IPX/AT/DEC Feature Pack
CD25-BP-11.3=	Cisco 2500 Series, IP/IPX/AT/DEC Plus Feature Pack
CD25-AP-11.3=	Cisco 2500 Series, Enterprise Plus Feature Pack
CD25-AL-11.3=	Cisco 2500 Series, Enterprise Plus IPSec 56 Feature Pack
CD25-E-11.3=	Cisco 2500 Series, Remote Access Server Feature Pack
Cisco 2500 Series Bundles
Y2K-25A=	Cisco 2500 Y2K IOS Enterprise Bundle (Flash, DRAM, Boot ROM)
Y2K-25B=	Cisco 2500 Y2K IOS Desktop Bundle (Flash, DRAM, Boot ROM)
Y2K-25BS=	Cisco 2500 Y2K IOS Desktop & IBM Bundle (Flash, DRAM, Boot ROM)
Y2K-25CS=	Cisco 2500 Y2K IOS IP & IBM Bundle (Flash, DRAM, Boot ROM)
Y2K-25D=	Cisco 2500 Y2K IOS IP/IPX Bundle (Flash, DRAM, Boot ROM)
Y2K-25DS=	Cisco 2500 Y2K IOS IP/IPX & IBM Bundle (Flash, DRAM, Boot ROM
Y2K-25LF=	Cisco 2500 Y2K IOS LANFRAD Bundle (DRAM, Boot ROM)
Cisco 2500 Series Memory Options
MEM-1X4F=	Cisco 2500 Series, 4 MB Flash Upgrade
MEM-1X8F=	Cisco 2500 Series, 8 MB Flash Upgrade
MEM-1X8D=	Cisco 2500 Series, 8 MB DRAM Upgrade
MEM-1X16D=	Cisco 2500 Series, 16 MB DRAM Upgrade
Cisco 2500 Series Accessories
ACS-2500RM-19=	Cisco 2500 Series, Rack-Mount Kit, 19 Inches
ACS-2500RM-24=	Cisco 2500 Series, Rack-Mount Kit, 24 Inches
ACS-2500ASYN=	Cisco 2500/AS5200 Series, AUX/Console Part Cable Kit
ACS-2500RPS=	Cisco 2500 Series, RPS Field Upgrade
Cisco 2500 Series Basic Maintenance
CON-SNT-PKG4	Cisco 2500 Series (2501-2514, 2520-2522) SMARTnet (8 x 5 x NBD)
CON-SNT-PKG5	Cisco 2500 Series (2515, 2516, 2523-2525) SMARTnet (8 x 5 x NBD)

For More Information

See the Cisco 2500 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/accserv/as2500/

Cisco 2600 Series

Cisco Systems extends enterprise-class versatility, integration, and power to branch offices with the Cisco 2600 series. The Cisco 2600 series' modular architecture provides the versatility needed to adapt to changes in network technology as new services and applications become available. Driven by a powerful RISC processor, the Cisco 2600 series supports advanced Quality of Service (QoS), security, and network integration features required in today's evolving networks. By integrating the functions of multiple separate devices into a single unit, the Cisco 2600 Series reduces the complexity of managing remote networks. The Cisco 2600 series shares modular interfaces with the Cisco 1600, 1700, and 3600 series, providing a cost-effective solution for applications such as Internet/intranet access, multiservice voice/data integration, analog and digital dial access services, VPN access, ATM access concentration, VLANs, and routing bandwidth management.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 2600 Series	LAN to LAN routing, including bandwidth management Remote access server (analog and digital dial services) Multiservice voice/fax/data integration VPN/Extranet access with optional Firewall Security Serial device concentration WAN access, including ATM services
Cisco 2610	One Ethernet port
Cisco 2611	Two Ethernet ports for LAN segmentation or secure LAN isolation
Cisco 2612	One Token Ring port and one Ethernet port for mixed LANs and migrating from Token Ring to Ethernet
Cisco 2613	One Token Ring port
Cisco 2620	One autosensing 10/100 Mbps Ethernet port with VLAN support
Cisco 2621	Two autosensing 10/100 Mbps Ethernet ports with VLAN support

Key Features

Versatility/investment protection---field-upgradable modular interfaces enable thousands of customized solutions and easy migration to future network requirements
Integration/manageability---lowers cost of ownership and improves ease of remote management, providing integrated "branch-in-a-box" networking that combines CSU/DSUs, multiplexors, modems, voice/data gateways, ISDN NT1s, firewalls, VPNs, encryption, and compression devices
Multiservice voice/data networks---reduces phone costs between offices; using Cisco IOS QoS features (such as RSVP, WFQ, committed access rate [CAR], and Random Early Detection [RED]), voice traffic is digitized and encapsulated in IP packets and consolidated with data traffic

Specifications

Feature	Cisco 2610	Cisco 2611	Cisco 2612	Cisco 2613	Cisco 2620	Cisco 2621
Fixed LAN Ports (connections)	1-port Ethernet (RJ-45)	2-port Ethernet (RJ-45)	1-port Ethernet 1-port Token Ring	1-port Token Ring	1-port 10/100 Mbps Ethernet	2-port 10/100 Mbps Ethernet
Fixed WAN Ports	1-115.2 Kbps async only (aux port)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Network Module Slots	1	1	1	1	1	1
WAN Interface Card Slots	2	2	2	2	2	2
Advanced Integration Slots (AIM)	1	1	1	1	1	1
WAN Interface Cards	1-port ISDN BRI (S/T) 1-port ISDN BRI (U) 1-port 4-wire 56/64-kbps CSU/DSU 1-port T1/FT1 CSU/DSU 1- and 2-port high-speed (2 Mbps) sync serial 2-port low-speed (134 Kbps) async/sync serial	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Multiflex Voice and WAN Interface Cards¹	1- and 2-port T1/FT1 with CSU/DSU and optional Drop and Insert 1- and 2-port E1/frac E1 balanced/unbalanced modes, optional Drop and Insert	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Voice/Fax Network Modules	1- and 2-slot voice/fax 1-slot high-density voice/fax	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Voice Interface Card Modules	2-port voice---FXS 2-port voice---E&M 2-port voice---FXO 2-port voice---BRI (S/T-TE)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
LAN Modules	1- and 4-port Ethernet 10BaseT	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
WAN Modules	4- and 8-port BRI (S/T) 4- and 8-port BRI (U) w/ NT1 4- and 8-port async/sync serial 16- and 32-port async serial 1- and 2-port Channelized T1/PRI 1- and 2-port Channelized T1/PRI w/CSU 1- and 2-port Channelized E1/PRI balanced 1- and 2-port Channelized E1/PRI unbalanced	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
ATM Modules	1-port ATM-25 4- and 8-port T1 ATM IMA with CSU/DSU 4- and 8-port E1 ATM IMA	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Modem Modules	8- and 16-port analog	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
AIM Modules	Data Compression AIM (8 Mbps)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Processor Speed (type)	40-MHz (RISC)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	50-MHz (RISC)	50-MHz (RISC)
Flash Memory	8 MB (default) 16 MB (max)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
DRAM Memory	24 MB (default) 64 MB (max)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Power Supply	AC, DC optional, redundant power (external unit)	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Dimensions (HxWxD)	1.69 x 17.5 x 11.8 in.	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610	Same as Cisco 2610
Service Category	5	5	5	5	5	5

¹Packet Voice applications require the use of the high-density voice/fax network module.

Competitive Products

3Com: SuperStack II NETBuilder SI and Pathbuilder S400
Bay Networks: Advanced Remote Node (ARN)
Motorola: Vanguard 6450/6430
Shiva: LanRover Family

Cisco IOS Software and Memory Requirements

The Cisco 2600 Series in distribution ships with:

8-MB Flash memory
24-MB DRAM memory

To run the Cisco IOS 12.0(4)T Feature Packs, you need, at a minimum, the amount of memory shown in the following table. Some configurations will require more than the recommended minimum.

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required¹ DRAM Memory Required1

CD26-C-12.0(5)=

IP only

12.0(5)

4 MB

20 MB

CD26-CP-12.0(5)=

IP Plus

12.0(5)

8 MB

32 MB

CD26-CH-12.0(5)=

IP/Firewall with NAT

12.0(5)

4 MB

20 MB

CD26-CHL-12.0(5)=

IP/Firewall Plus IPSec 56

12.0(5)

8 MB

32 MB

CD26-CHK2-12.0(5)=

IP/Firewall Plus IPSec 3DES

12.0(5)

8 MB

32 MB

CD26-CW-12.0(5)=

IP Plus 40

12.0(5)

8 MB

32 MB

CD26-CL-12.0(5)=

IP Plus IPSec 56

12.0(5)

8 MB

32 MB

CD26-CK2-12.0(5)=

IP Plus IPSec SF-DES

12.0(5)

8 MB

32 MB

CD26-B-12.0(5)=

IP/IPX/AT/DEC

12.0(5)

8 MB

24 MB

CD26-BHP-12.0(5)=

IP/IPX/AT/DEC/Firewall Plus

12.0(5)

8 MB

32 MB

CD26-BP-12.0(5)=

IP/IPX/AT/DEC Plus

12.0(5)

8 MB

32 MB

CD26-AP-12.0(5)=

Enterprise Plus

12.0(5)

8 MB

40 MB

CD26-AHK2-12.0(5)=

Enterprise/Firewall Plus IPSec 3DES

12.0(5)

8 MB

40 MB

CD26-AHL-12.0(5)=

Enterprise/Firewall Plus IPSec 56

12.0(5)

8 MB

40 MB

CD26-AL-12.0(5)=

Enterprise Plus IPSec 56

12.0(5)

8 MB

40 MB

CD26-AK2-12.0(5)=

Enterprise Plus IPSec 3DES

12.0(5)

8 MB

40 MB

CD26-ANP-12.0(5)=

Enterprise/APPN Plus

12.0(5)

8 MB

40 MB

CD26-ANL-12.0(5)=

Enterprise/APPN Plus IPSec 56

12.0(5)

16 MB

40 MB

CD26-E-12.0(5)=

Remote Access Server

12.0(5)

4 MB

20 MB

¹Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.

Distribution Part Numbers and Ordering Information


Cisco 2600 Series Router Chassis¹
CISCO2610	1-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2610-DC	1-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, DC power supply, IP s/w
CISCO2610-RPS	1-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w
CISCO2611	2-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2611-DC	2-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, DC power supply, IP s/w
CISCO2611-RPS	2-port 10bT, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w
CISCO2612	1-port 10bT, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2612-DC	1-port 10bT, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w
CISCO2612-RPS	1-port 10bT, 1-port TR, 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w
CISCO2613	1-port Token Ring, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2613-DC	1-port Token Ring, 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w
CISCO2613-RPS	1-port Token Ring, 1 network module slot, 1AIM slot, 2 WIC slots, RPS adapter, IP s/w
CISCO2620	1-port 10/100, 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2620-DC	1-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots DC Power Supply, IP s/w
CISCO2620-RPS	1-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, RPS adapter, IP s/w
CISCO2621	2-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, IP s/w
CISCO2621-DC	2-port 10/100 (autosensing), 1 network module slot, 1 AIM slot, 2 WIC slots, DC Power Supply, IP s/w
CISCO2621-RPS	2-port 10/100 (autosensing), 2 network module slot, 1 AIM slot, 2 WIC slot, RPS adapter, IP s/w
Cisco 2600 Series LAN Modules
NM-1E=	1-port 10bT network module
NM-4E=	4-port 10bT network module
Cisco WAN Interface Cards (WICs)
WIC-1B-S/T=	1-port BRI (S/T) WAN Interface Card (Dial and Leased Line)
WIC-1B-U=	1-port BRI (U) w/NT-1 WAN Interface Card (Dial and Leased Line)
WIC-1DSU-56K4=	1-port Serial W/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
WIC-1DSU-T1=	1-port Serial w/ FrT1/T1 DSU/CSU WAN Interface Card
WIC-1T=	1-port Serial WAN Interface Card
WIC-2T=	2-port Serial WAN Interface Card
WIC-2A/S=	2-port Async/Sync Serial WAN Interface Card
Cisco 2600 and 3600 Series Multiflex Voice and WAN Interface Cards²
VWIC-1MFT-T1=	1-Port RJ-48 Multiflex Trunk - T1
VWIC-2MFT-T1=	2-Port RJ-48 Multiflex Trunk - T1
VWIC-2MFT-T1-DI=	2-Port RJ-48 Multiflex Trunk - T1 With Drop and Insert
VWIC-1MFT-E1=	1-Port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1=	2-Port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1-DI=	2-Port RJ-48 Multiflex Trunk - E1 With Drop and Insert
Cisco 2600 and 3600 Series Voice/Fax Network Modules
NM-1V=	1-Slot Voice/Fax network module
NM-2V=	2-Slot Voice/Fax network module
NM-HDV-1T1-24=	24 channel T1 high density voice/fax network module
NM-HDV-1T1-24E=	24 channel enhanced T1 high density voice/fax network module
NM-HDV=	High density voice network module, spare (no T1 or DSPs)
Cisco 2600 and 3600 Series Voice Interface Cards (VICs)
VIC-2E/M=	2-port E&M Voice Interface Card
VIC-2FXO=	2-port FXO Voice Interface Card
VIC-2FXS=	2-port FXS Voice Interface Card
VIC-2BRI-S/T-TE=	2-port BRI (S/T user side) Voice Interface Card
Cisco 2600 and 3600 Series WAN Network Modules
NM-4B-S/T	4-port BRI (S/T) network module
NM-8B-S/T	8-port BRI (S/T) network module
NM-4B-U	4-port BRI (U) w/ NT1 network module
NM-8B-U	8-port BRI (U) w/ NT1 network module
NM-4A/S=	4-port Async/Sync Serial network module
NM-8A/S=	8-port Async/Sync Serial network module
NM-16A=	16-port Async Serial network module
NM-32A=	32-port Async Serial network module
NM-1CT1	1-port Channelized T1/ISDN-PRI network module
NM-2CT1	2-port Channelized T1/ISDN-PRI network module
NM-1CT1-CSU	1-port Channelized T1/ISDN-PRI w/ CSU network module
NM-2CT1-CSU	2-port Channelized T1/ISDN-PRI w/ CSU network module
NM-1ATM-25	1-port ATM 25 network module
NM-4T1-ATM	4-port T1 ATM with IMA network module
NM-4E1-ATM	4-port E1 ATM with IMA network module
NM-8T1-ATM	8-port T1 ATM with IMA network module
NM-8E1-ATM	8-port E1 ATM with IMA network module
Cisco 2600 and 3600 Series Modem Network Modules
NM-8AM=	8-port Analog Modem network module
NM-16AM=	16-port Analog Modem network module
Cisco 2600 and 3600 Series Modem Management Technology Licenses (MMTL)³
MMTL-3600/2600-8=	MMTL for 8 Analog Modems
MMTL-3600/2600-16=	MMTL for 16 Analog Modems
Cisco 2600 Series Software Feature Packs
CD26-C-12.0(5)=	Cisco 2600 Series, IP Feature Pack
CD26-CP-12.0(5)=	Cisco 2600 Series, IP Plus Feature Pack
CD26-CH-12.0(5)=	Cisco 2600 Series, IP/Firewall Feature Pack
CD26-CHL-12.0(5)=	Cisco 2600 Series, IP/Firewall Plus IPSec 56 Feature Pack
CD26-CHK2-12.0(5)=	Cisco 2600 Series, IP/Firewall Plus IPSec 3DES Feature Pack
CD26-CW-12.0(5)=	Cisco 2600 Series, IP Plus 40 Feature Pack
CD26-CL-12.0(5)=	Cisco 2600 Series, IP Plus IPSec 56 Feature Pack
CD26-CK2-12.0(5)=	Cisco 2600 Series, IP Plus IPSec SF-DES Feature Pack
CD26-B-12.0(5)=	Cisco 2600 Series, IP/IPX/AT/DEC Feature Pack
CD26-BHP-12.0(5)=	Cisco 2600 Series, IP/IPX/AT/DEC/Firewall Plus Feature Pack
CD26-BP-12.0(5)=	Cisco 2600 Series, IP/IPX/AT/DEC Plus Feature Pack
CD26-AP-12.0(5)=	Cisco 2600 Series, Enterprise Plus Feature Pack
CD26-AHL-12.0(5)=	Cisco 2600 Series, Enterprise/Firewall Plus IPSec 56 Feature Pack
CD26-AL-12.0(5)=	Cisco 2600 Series, Enterprise Plus IPSec 56 Feature Pack
CD26-AK2-12.0(5)=	Cisco 2600 Series, Enterprise Plus IPSec 3DES Feature Pack
CD26-ANP-12.0(5)=	Cisco 2600 Series, Enterprise/APPN Plus Feature Pack
CD26-ANL-12.0(5)=	Cisco 2600 Series, Enterprise/APPN Plus IPSec 56 Feature Pack
CD26-ANK2-12.0(5)=	Cisco 2600 Series, Enterprise/APPN Plus IPSec 3DES Feature
CD26-E-12.0(5)=	Cisco 2600 Series, RAS Feature Pack
Cisco 2600 Series Memory Options
MEM2600-4F=	Cisco 2600 Series, 4 MB Flash SIMM-Spare
MEM2600-8F=	Cisco 2600 Series, 8 MB Flash SIMM-Spare
MEM2600-16F=	Cisco 2600 Series, 16 MB Flash SIMM-Spare
MEM2600-4U8FS=	Cisco 2600 Series, 4 to 8 MB Flash Memory Upgrade
MEM2600-4U16FS=	Cisco 2600 Series, 4 to 16 MB Flash Memory Upgrade
MEM2600-8U16FS=	Cisco 2600 Series, 8 to 16 MB Flash Upgrade
MEM2600-4D=	Cisco 2600 Series, 4 MB DRAM DIMM
MEM2600-8D=	Cisco 2600 Series, 8 MB DRAM DIMM
MEM2600-16D=	Cisco 2600 Series, 16 MB DRAM DIMM
MEM2600-32D=	Cisco 2600 Series, 32 MB DRAM DIMM
MEM2600-24U32D=	Cisco 2600 Series, 24 to 32 MB DRAM Upgrade
MEM2600-24U40D=	Cisco 2600 Series, 24 to 40 MB DRAM Upgrade
MEM2600-24U48D=	Cisco 2600 Series, 24 to 48 MB DRAM Upgrade
BOOT-2600=	Cisco 2600 Series, Boot ROM Upgrade
Cisco 2600 Series Advanced Integration Modules
AIM-COMPR2=	Data Compression AIM for the Cisco 2600 series
Cisco 2600 Series Accessories
ACS-2600RM-19=	Cisco 2600 Series, 19-Inch Rack Mount Kit
ACS-2600RM-24=	Cisco 2600 Series, 23/24-Inch Rack Mount Kit
ACS-2600ASYN=	Cisco 2600 Series, Auxiliary and Console Port Cable Kit
PWR-2600-AC=	Cisco 2600 Series, AC power supply (Spare)
PWR-2600-DC=	Cisco 2600 Series, DC power supply (Spare)
ACS-2600RPS=	Cisco 2600 Series, RPS adapter - Field Upgrade
ACS-2600NEBS/ETSI=	NEBS/ETSI Telco Accessory Kit for Cisco 2600 Series
WIC-BLANK-PANEL=	Blank WAN Interface Card (WIC) Panel
Cisco 2600 Series Basic Maintenance
CON-SNT-PKG5	Cisco 2600 Series SMARTnet Maintenance

For More Information

See the Cisco 2600 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/2600/

Cisco 3300 Series

The Cisco ISR 3303 combines SONET reliability and Layer 3 awareness at the edge of the network in a single platform. The Cisco ISR 3303 is generally deployed at the edge of the SONET network in a multi-tenant environment. Traditional leased-line DS1 services can be offered to support PBX digital trunk interfaces, digital loop carrier systems, T1 channel banks, T1 interfaces to Frame relay FRADs, or ATM T1 multiplexers. The Ethernet interfaces can support a variety of service interfaces that can be configured for either bridging or routing, and connect to a local LAN via 10BaseT to a hub, switch, or router.

These DS1 and 10BaseT interfaces can be then be mapped into a channelized SONET OC-3 interface for WAN connectivity into a SONET network either using Automatic Protection Switching (APS) or Uni-directional Path Switched Ring (UPSR) protection mechanisms. T1/DS1 services are mapped into VT 1.5s. Ethernet services are mapped into SONET compliant Wideband Packet-over-SONET (WPOS). WPOS provides data bandwidth scalability by mapping Ethernet services via PPP into a single DS1 for service rates of 1.4 Mbps, These DS1s encapsulating the data are then mapped directly into SONET to ensure network compatibility.

The system supports 1:1 redundancy for system processor/router, IOS and config file, Ethernet interfaces, DS1 interfaces, and system power. Pricing for a fully equipped system, including software, is $22,500.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 3303	When a SP is interested in providing a LAN/WAN service solutions When a SP is interested in providing traditional T1 leased line services When an Internet Service Provider is discussing plans to move from pure ISP to CLEC When an enterprise customer is thinking about deploying a fiber inter-campus network

Key Features

Combines SONET access multiplexer equipment with IOS router in a single, cost-efficient, and redundant platform.
Integrated IOS Software
Full system redundancy (processor/router, IOS and config file, Ethernet interfaces, DS1 interfaces, and system power)
NEBS Compliant, 19"x 11.3" x 2U
SONET UPSR or APS configurations (auto-provisioning of alarms and performance monitoring)

Specifications

Feature	Cisco 3303
SAM Interface Module	1 OC-3 interface (IR, SC), 8 10BaseT ports, 8 DS1 ports; a second SAM provides interface and processor redundancy
Optical Specifications	Intermediate Reach: 1270-1380 nm IR-1 Line Rate: 155.52 Mbps Connector type: SC Launch power (max.): -8 dBm Launch power (min.): -15 dBm Receiver power (max.): -8 dBm Receiver power (min.): -31 dBm Power budget: 16 Db
DS1 Interfaces	Up to 655 feet @ DSX-1 w/5 LBO settings Framing: SF, ESF, UNF, SLC Linecoding: AMI or B8ZS
Ethernet Interfaces	10BaseT, 100 Meters
Performance Monitoring	Per T1.403 Near-end for OC-3 Section Near-end and Far-end for OC-3 Line, STS-1 Path, VT 1.5s and DS1s
Loopbacks	OC-3 Optical Line, STS-1, VT 1.5
Processor Speed (type)	200 MHz (RISC)
Flash Memory	8 MB
DRAM Memory	64 MB
Dimensions (HxWxD)	3.5 x 11.8 x 17.5 in.

Competitive Products

Fujitsu: Fujitsu FLM-150 equipped with FASTLANE Ethernet Bridge Module
Lucent: DDM-2000 equipped with Ethernet bridging module
Nortel: OC-3 Express ADM equipped with EIM Modules
Positron (Marconi): OC-3 OSIRIS with Ethernet bridging module

Distribution Part Numbers and Ordering Information


Cisco 3303 Series Router Chassis¹
ISR 3303-R-SC	Cisco 3303 redundant system with Cisco IP software and two SAMs for system redundancy
ISR 3303-NR-SC	Cisco 3303 nonredundant system with a single SAM and Cisco IP software

For More Information

See the Cisco 3300 Series Web site: http://www.cisco.com/go/3300

Cisco 3600 Series

The Cisco 3600 Series is a family of modular, multifunction access platforms for medium and large-sized offices and Internet Service Providers. With over 70 modular interface options, the Cisco 3600 family provides solutions for voice/data integration, virtual private networks (VPNs), dial access, and multiprotocol data routing. Using Cisco's voice/fax network modules, the Cisco 3600 Series allows customers to consolidate voice, fax, and data traffic on a single network. The high-performance, modular architecture protects customers' investment in network technology and integrates the functions of several devices into a single, manageable solution. 3600 Bundles are also available to address specific RAS opportunities. Pricing for typical configurations starts at $5,200.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 3620	Medium-density WAN and dialup connectivity Medium-density LAN connectivity Low-density Voice over Data Low-density ATM connections Mid-density Modem over PRI Bundles
Cisco 3640	High-density WAN and dialup connectivity Medium- to high-density LAN connectivity Mid-density Voice over Data Low- to mid-density ATM connections Low-density Modem over BRI Bundles
Cisco 3660	Very high-density WAN and dialup connectivity High-density LAN connectivity Mid-density Voice over Data Mid-density ATM connections

Key Features

Combines dial access, advanced LAN-to-LAN routing services, ATM connectivity and multiservice integration of voice, video, and data in a single platform
Modular, scalable design provides performance, scalability, flexibility, and investment protection
High-density ISDN PRI capabilities
Preconfigured BRI and PRI modem bundles available
Support for Modem-over-BRI functionality
Integrated Cisco IOS software (price includes IP IOS software)
Full VPN support
Cisco IOS Firewall feature set provides security against network intrusion

Specifications

Feature	Cisco 3620	Cisco 3640	Cisco 3660
Fixed Ports	None	None	2 10/100 Ethernet
Network Module Slots	2	4	6
Advanced Integrations Module (AIM) Slots	None	None	2
LAN/Combo Modules	1- and 4-port 10BaseT Module 1- and 2-port 10BaseT, 2 WIC Slots 1 -port 10BaseT, 1-port TR, 2 WIC Slots 1-port 10/100BaseTX Module 1-port 100BaseFX Module 1-port 10/100bTX, 1-port Ch T1/ISDN-PRI 1-port 10/100bTX, 2-port Ch T1/ISDN-PRI 1-port 10/100bTX, 1-port Ch T1/ISDN-PRI w/ CSU 1-port 10/100BbTX, 2-port Channelized T1/ISDN-PRI w/ CSU 1-port 10/100bTX, 1-port Ch E1/PRI Unbal 1-port 10/100bTX, 2-port Ch E1/PRI Unbal 1-port 10/100bTX, 1-port Ch E1/PRI Bal 1-port 10/100bTX, 2-port Ch E1/PRI Bal	Same as Cisco 3620	1-port 10BaseT Module 4-port 10BaseT Module 1-port 10BaseT, 2 WIC Slots 2-port 10BaseT, 2 WIC Slots 1 -port 10BaseT, 1-port Token Ring, 2 WIC Slots 1-port 10/100BaseTX Module 1-port 100BaseFX Module
WAN Modules	4- and 8-port BRI (S/T) 4- and 8-port BRI (U) w/ NT-1 4-port serial 4- and 8-port async/sync serial 16- and 32-port async 1- and 2-port Channelized T1/ISDN-PRI 1- and 2-port Channelized T1/ISDN-PRI w/ CSU 1-port HSSI Compression	Same as Cisco 3620	4- and 8-port BRI (S/T) 4- and 8-port BRI (U) w/ NT-1 4-port serial 4- and 8-port async/sync serial 16- and 32-port async 1-port HSSI Compression
ATM Modules	1-port 25-MBps ATM 1-port OC3-155Mbps ATM 4- and 8-port T1 ATM (with IMA)	Same as Cisco 3620	1-port OC3-155Mbps ATM 4- and 8-port T1 ATM (with IMA)
Voice/Fax Modules	1- or 2-slot voice/fax 1-port T1 24 channel voice/fax 1-port T1 24 enhanced channel voice/fax 2-port T1 48 channel voice/fax	Same as Cisco 3620	Same as Cisco 3620
WAN Interface Card (WIC) Modules	1-port ISDN BRI (S/T) 1-port ISDN BRI (U) 1-port sync serial 1-port 4-wire 56-kbps CSU/DSU 1-port T1/FT1 CSU/DSU	Same as Cisco 3620	Same as Cisco 3620
Voice Interface Card (VIC) Modules	2-port voice---FXS 2-port voice---E&M 2-port voice---FXO 2-port voice---BRI (S/T-TE)	Same as Cisco 3620	Same as Cisco 3620
Modem Modules	6-, 12-, 18-, 24-, and 30-port digital modem 8- and 16-port analog modem	Same as Cisco 3620	Not supported at initial FCS
Processor Speed (type)	80-MHz (IDT R4700 RISC)	100-MHz (IDT R4700 RISC)	225-MHz (QED RM5271 RISC)
Flash Memory	8 MB (default); 32 MB (max)	Same as Cisco 3620	Same as Cisco 3620
DRAM Memory	32 MB (default) 64 MB (max)	32 MB (default) 128 MB (max)	32 MB (default) 256 MB (max)
Power Supply	AC, DC optional	AC, DC optional	Single or dual AC/DC
Dimensions (HxWxD)	1.75 x 17.5 x 13.5 in.	3.44 x 1.75 x 15 in.	8.7 x 17.5 x 11.8 in.
Service Category	7	10	10

Competitive Products

3Com: NETBuilder II and Netserver I-Modem
Bay: ASN and ARN
IBM: 2212
Intel/Shiva: Lanrover series
Livingston: Portmaster 2E/2ER
Nortel/Bay: 5400

Cisco IOS Software and Memory Requirements

The Cisco 3600 Series in distribution ships with:

8-MB Flash memory
32-MB DRAM memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required¹ DRAM Memory Required

CD36-C-12.0.5=

IP only

12.0(5)T

8 MB

24 MB

CD36-CH-12.0.5=

IP/FW

12.0(5)T

8 MB

24 MB

CD36-CHK2-12.0.5=

IP/FW Plus IPSec 3DES

12.0(5)T

8 MB

24 MB

CD36-CP-12.0.5=

IP Plus

12.0(5)T

8 MB

32 MB

CD36-CL-12.0.5=

IP Plus IPSec 56

12.0(5)T

8 MB

32 MB

CD36-CHL-12.0.5=

IP/FW Plus IPSec 56

12.0(5)T

8 MB

32 MB

CD36-B-12.0.5=

IP/IPX/AppleTalk/DECnet

12.0(5)T

8 MB

32 MB

CD36-BP-12.0.5=

IP/IPX/AppleTalk/DECnet Plus

12.0(5)T

16 MB

32 MB

CD36-BHP-12.0.5=

IP/IPX/AT/DEC/FW Plus

12.0(5)T

16 MB

32 MB

CD36-AP-12.0.5=

Enterprise Plus

12.0(5)T

16 MB

48 MB

CD36-AL-12.0.5=

Enterprise Plus IPSec 56

12.0(5)T

16 MB

48 MB

CD36-AHL-12.0.5=

Enterprise/FW Plus IPSec 56

12.0(5)T

16 MB

48 MB

CD36-AHK-12.0.5=

Enterprise/FW Plus IPSec 56 3DES

12.0(5)T

16 MB

48 MB

¹Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.

Distribution Part Numbers and Ordering Information


Cisco 3600 Series Router Chassis¹
CISCO3620	2-slot Modular Router-AC Power Supply, IP s/w
CISCO3620-DC	2-slot Modular Router-DC Power Supply, IP s/w
CISCO3620-RPS	2-slot Modular Router, w/ RPS, IP s/w
CISCO3640	4-slot Modular Router-AC Power Supply, IP s/w
CISCO3640-DC	4-slot Modular Router-DC Power Supply, IP s/w
CISCO3640-RPS	4-slot Modular Router, w/ RPS, IP s/w
Cisco 3661-DC	10/100 E Cisco 3660 6-slot Modular Router-DC with IP SW
Cisco 3661-AC	10/100 E Cisco 3660 6-slot Modular Router-AC with IP SW
Cisco 3662-DC	Dual 10/100 E Cisco 3660 6-slot Modular Router-DC with IP SW
Cisco 3662-AC	Dual 10/100 E Cisco 3660 6-slot Modular Router-AC with IP SW
Cisco 3600 Series Bundles
3640MBUNDLE-4B-S/T	3640 BRI Dial bundle. Includes 1E2W,12DM, 4 BRI-S/T, IP IOS
3640MBUNDLE-4B-U	3640 BRI Dial bundle. Includes 1E2W,12DM, 4 BRI-U, IP IOS
3640MBUNDLE-8B-S/T	3640 BRI Dial bundle. Includes 1E2W,18DM, 8 BRI-S/T, IP IOS
3640MBUNDLE-8B-U	3640 BRI Dial bundle. Includes 1E2W,18DM, 8 BRI-U, IP IOS
3620MBUNDLE-24DM	3620 PRI Dial bundle. Includes 1FE2CT1-CSU, 24DM, IP IOS
3620MBUNDLE-30DM	3620 PRI Dial bundle. Includes 1FE2CE1-U, 30DM, IP IOS
AS3640-T1-48DM	3600 Access Concentrator, 48 MICA Modems, 2 PRI/T1, Ethernet, IP IOS
AS3640-E1-60DM	3600 Access Concentrator, 60 MICA Modems, 2 PRI/T1, Ethernet, IP IOS
Cisco 3600 Series LAN/Combo Modules
NM-1E=	1-port 10bT Module
NM-4E=	4-port 10bT Module
NM-1FE-TX=	1-port 100bTX Module
NM-1FE-FX=	1-port 100bFX Module
NM-1E2W=	1-port 10bT, 2 WIC Slots Module
NM-2E2W=	2-port 10bT, 2 WIC Slots Module
NM-1E1R2W=	1-port 10bT, 1-port Token Ring, 2 WIC Slots Module
NM-1FE1CT1=	1-port 100bTX, 1-port Channelized T1/ISDN-PRI Module
NM-1FE1CT1-CSU=	1-port 100bTX, 1-port Channelized T1/ISDN-PRI with CSU Module
NM-1FE1CE1B=	1-port 100bTX, 1-port Channelized E1/ISDN-PRI (Balanced) Module
NM-1FE1CE1U=	1-port 100bTX, 1-port Channelized E1/ISDN-PRI (Unbalanced) Module
NM-1FE2CT1=	1-port 100bTX, 2-port Channelized T1/ISDN-PRI Module
NM-1FE2CT1-CSU=	1-port 100bTX, 2-port Channelized T1/ISDN-PRI with CSU Module
NM-1FE2CE1B=	1-port 100bTX, 2-port Channelized E1/ISDN-PRI (Balanced) Module
NM-1FE2CE1U=	1-port 100bTX, 2-port Channelized E1/ISDN-PRI (Unbalanced) Module
Cisco 3600 Series WAN Interface Cards (WICs)
WIC-1B-S/T=	1-port ISDN WAN Interface Card (Dial and Leased Line)
WIC-1B-U=	1-port BRI (U) w/ NT-1 WAN Interface Card (Dial and Leased Line)
WIC-1DSU-56K4=	1-port Serial w/ 4-Wire 56/64Kbps DSU/CSU WAN Interface Card
WIC-1DSU-T1=	1-port Serial w/ FrT1/T1 DSU/CSU WAN Interface Card
WIC-1T=	1-port Serial WAN Interface Card
Cisco 3600 Multiflex Voice/WAN Interface Cards
VWIC-1MFT-T1=	1-port RJ-48 Multiflex Trunk - T1
VWIC-2MFT-T1=	2-port RJ-48 Multiflex Trunk - T1
VWIC-2MFT-T1-D1=	2-port RJ-48 Multiflex Trunk - T1 With Drop and Insert
VWIC-1MFT-E1=	1-port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1=	2-port RJ-48 Multiflex Trunk - E1
VWIC-2MFT-E1-D1=	2-port RJ-48 Multiflex Trunk - E1 With Drop and Insert
Cisco 3600 Series Voice/Fax Modules
NM-1V=	1-slot Voice/fax Module
NM-2V=	2-slot Voice/fax Module
NM-HDV-1T1-24=	1-port T1 24 Channel Voice/fax Module
NM-HDV-1T1-24E=	1-port T1 24 Enhanced Channel Voice/fax Module
NM-HDV-2T1-48=	2-port T1 48 Channel T1 Voice/fax Module
NM-HDV=	1-slot High-Density Voice/fax Module
Cisco 3600 Series High-Density Voice/Fax DSP Options
PVDM-12=	12-channel Packet Voice DSP Module (SIMM)
Cisco 3600 Series Voice Interface (VIC) Cards
VIC-2E/M=	2-port Voice Interface Card - E&M
VIC-2FXO=	2-port Voice Interface Card - FXO
VIC-2FXS=	2-port Voice Interface Card - FXS
VIC-2BRI-S/T-TE=	2-port Voice Interface Card - BRI (S/T user side)
Cisco 3600 Series WAN Modules
NM-4B-S/T=	4-port BRI (S/T) Module
NM-8B-S/T=	8-port BRI (S/T) Module
NM-4B-U=	4-port BRI (U) w/ NT-1 Module
NM-8B-U=	8-port BRI (U) w/ NT-1 Module
NM-4T=	4-port Serial Module
NM-4A/S=	4-port Async/Sync Serial Module
NM-8A/S=	8-port Async/Sync Serial Module
NM-16A=	16-port Async Module
NM-32A=	32-port Async Module
NM-1CT1=	1-port Channelized T1/ISDN-PRI Module
NM-1CT1-CSU=	1-port Channelized T1/ISDN-PRI w/ CSU Module
NM-2CT1=	2-port Channelized T1/ISDN-PRI Module
NM-2CT1-CSU=	2-port Channelized T1/ISDN-PRI w/ CSU Module
NM-1HSSI=	1-port HSSI Module
NM-1ATM-25	1-port ATM 25 Module
NM-COMPR=	Compression Module
NM-1ATM-25=	1-port ATM 25 Module
NM-1A-OC3MM=	Single-Port 155-Mbps ATM OC-3 Multimode Network Module
NM-1A-OC3SMI=	Single-Port 155-Mbps ATM OC-3 Single-Mode Intermediate Reach Network Module
NM-1A-OC3SML=	Single-Port ATM 155-Mbps OC-3 Single-Mode Long-Reach Network Module
NM-4T-IMA=	4-port T1 ATM with Inverse Multiplexing over ATM (IMA) network module
NM-4E-IMA =	4-port E1 ATM with IMA network module +
NM-8T-IMA =	8-port T1 ATM with IMA network module +
NM-8E-IMA=	8-port E1 ATM with IMA network module +
AIM-UMPR4-4E	Cisco 3660 AIM module
Cisco 3600 Series Modem Modules
NM-6DM=	6-port Digital Modem Module
NM-8AM=	8-port Analog Modem Module
NM-12DM=	12-port Digital Modem Module
NM-16AM=	16-port Analog Modem Module
NM-18DM=	18-port Digital Modem Module
NM-24DM=	24-port Digital Modem Module
NM-30DM=	30-port Digital Modem Module
MICA-6MOD=	6-port Digital Modem Module (Spare)
Cisco 3600 Series Modem Management Technology Licenses²
MMTL-3600-6=	Modem Management Technology License (6 modems)
MMTL-3600-12=	Modem Management Technology License (12 modems)
MMTL-3600-18=	Modem Management Technology License (18 modems)
MMTL-3600-24=	Modem Management Technology License (24 modems)
MMTL-3600-30=	Modem Management Technology License (30 modems)
MMTL-3600/2600-8=	Modem Management Technology License (for 8 Analog Modems)
MMTL-3600/2600-16=	Modem Management Technology License (for 16 Analog Modems)
Cisco 3600 Series Software Feature Packs
CD36-C-12.0.5=	IP only Feature Pack
CD36-CH-12.0.5=	IP/FW Feature Pack
CD36-CHK2-12.0.5=	IP/FW Plus IPSec 3DES Feature Pack
CD36-CP-12.0.5=	IP Plus Feature Pack
CD36-CL-12.0.5=	IP Plus IPSec 56 Feature Pack
CD36-CHL-12.0.5=	IP/FW Plus IPSec 56 Feature Pack
CD36-B-12.0.5=	IP/IPX/AppleTalk/DECnet Feature Pack
CD36-BP-12.0.5=	IP/IPX/AppleTalk/DECnet Plus Feature Pack
CD36-BHP-12.0.5=	IP/IPX/AT/DEC/FW Plus Feature Pack
CD36-AP-12.0.5=	Enterprise Plus Feature Pack
CD36-AL-12.0.5=	Enterprise Plus IPSec 56 Feature Pack
CD36-AHL-12.0.5=	Enterprise/FW Plus IPSec 56 Feature Pack
CD36-AHK-12.0.5=	Enterprise/FW Plus IPSec 56 3DES Feature Pack
Cisco 3600 Series Memory Options
MEM3600-8FS=	Cisco 3600 Series 8 MB Flash
MEM3600-4FC=	Cisco 3600 Series 4 MB Flash PCMCIA Card
MEM3600-8FC=	Cisco 3600 Series 8 MB Flash PCMCIA Card
MEM3620-4D=	Cisco 3620, 4 MB DRAM SIMM
MEM3620-8D=	Cisco 3620, 8 MB DRAM SIMM
MEM3620-16D=	Cisco 3620, 16 MB DRAM SIMM
MEM3640-2X4D=	Cisco 3640, 8 MB DRAM (2x4 MB DRAM SIMMs)
MEM3640-2X8D=	Cisco 3640, 16 MB DRAM (2x8 MB DRAM SIMMs)
MEM3640-2X16D=	Cisco 3640, 32 MB DRAM (2x16 MB DRAM SIMMs)
MEM3640-2X32D=	Cisco 3640, 64 MB DRAM (2x32MB DRAM SIMMs)
MEM3640-4X32D=	Cisco 3640, 128 MB DRAM (4x32MB DRAM SIMMs)
BOOT-3600=	Boot ROM Upgrade for Cisco 3600
MEM3600-16FS=	3600 Series 16 MB Flash
MEM3660-16D=	Cisco 3660, 16 MB DRAM Field Upgrade
MEM3660-32D=	Cisco 3660, 32 MB DRAM Field Upgrade
MEM3660-128D=	Cisco 3660, 128 MB DRAM Field Upgrade
MEM3660-32FS=	Cisco 3660, 32 MB Flash Field Upgrade
MEM3660-2X64D=	Cisco 3660, 128 MB Flash (2x64 MB Flash SIMMs)
MEM3660-2X128D=	Cisco 3660, 256 MB Flash (2x128 MB Flash SIMMs)
MEM3600-2X8FS=	Cisco 3600, 16 MB Flash (2x8 MB Flash SIMMs)
MEM3600-2X16FS=	Cisco 3600, 32 MB Flash (2x16 MB Flash SIMMs)
MEM3600-16FC=	Cisco 3600 Series 16MB Flash Card
Cisco 3600 Series Accessories
ACS-3620RM-19=	Cisco 3620 - 19-Inch Rack Mount Kit
ACS-3620RM-24=	Cisco 3620 - 24-Inch Rack Mount Kit
PWR-3620-AC	Cisco 3620 - AC Power Supply
PWR-3620-DC	Cisco 3620 - DC Power Supply
ACS-3620RPS=	Cisco 3620 - RPS Field Upgrade
ACS-3640RM-19=	Cisco 3640 - 19-Inch Rack Mount Kit
ACS-3640RM-24=	Cisco 3640 - 24-Inch Rack Mount Kit
PWR-3640-AC	Cisco 3640 - AC Power Supply
PWR-3640-DC	Cisco 3640 - DC Power Supply
ACS-3640RPS=	Cisco 3640 - RPS Field Upgrade
NM-BLANK-PANEL=	Blank Network Module Panel
WIC-BLANK-PANEL=	Blank WAN Interface Card Panel
ACS-3660RM-19	19 inch Rack Mount Kit for the Cisco 3660
ACS-3660RM-23	23 inch Rack Mount Kit for the Cisco 3660
ACS-3660RM-24	24 inch Rack Mount Kit for the Cisco 3660
ACS-3660 NEBS/ETSI=	NEBS/ETSI Central Office Auxiliary Kit for Cisco 3660
PWR-Cisco3660-AC	AC Power Supply for Cisco 3660
PWR-Cisco3660-DC	DC Power Supply for Cisco 3660
Cisco 3600 Series Basic Maintenance
CON-SNT-PKG7	Cisco 3620 SMARTnet Maintenance
CON-SNT-PKG10	Cisco 3640 and 3660 SMARTnet Maintenance

For More Information

See the Cisco 3600 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/3600/

Cisco MC3810 Multiservice Concentrator

The Cisco MC3800 multiservice, integrated access platform enables organizations to integrate all traffic---voice, fax, video, legacy data, and LAN traffic---over a single network backbone. The Cisco MC3810 multiservice access concentrator can be deployed over private or public networks, dramatically reducing equipment and connection costs, simplifying network management, and improving application performance. The Cisco MC3810 combines switched voice, LAN traffic, and legacy data over Frame Relay, ATM, or leased lines at speeds up to T1/E1. The MC3810 is based on Cisco IOS software and is designed to operate with all IOS-based routers, the Cisco IGX 8400, and the LightStream® 1010.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco MC3810	Reduce access charges by integrating private branch exchange (PBX), video, and router access lines Multiservice branch connectivity Reduce interoffice voice costs (toll bypass) Voice ports can be analog or digital (channelized) Improve bandwidth efficiency by replacing TDM equipment

Key Features

Seamlessly integrates data, voice, and video
Leased line, Frame Relay, and ATM service compatible
Complete Cisco IOS-based multiprotocol routing, bridging, and Systems Network Architecture (SNA)
Quality voice compression at 8 kbps (G.729, G.729a), 32 kbps (adaptive differential pulse code modulation [ADPCM]), or 64 kbps pulse code modulation
Wire-speed T1/E1 router and serial data device with voice, video, and ATM capability

Specifications

Feature	Cisco MC3810
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)
Fixed WAN Ports (connections)	2-port sync serial (DB-60)
Modular Slots	3
Voice Modules	6-port analog voice 1-port digital voice 4-port BRI voice 1-port RS-366 video module
WAN Modules	1-port channelized T1/E1 multiflex trunk with optional BRI backup
Processor Speed (type)	40 MHz (Motorola 860 Power PC)
Flash Memory	8 MB (default) 16 MB (max)
DRAM Memory	32 MB (default)
Power Supply	AC; optional DC and redundant
Dimensions (HxWxD)	1.75 x 17.5 x 10.25 in.
Service Category	7

Competitive Products

Ascend: SA100 and SA50
Lucent: Yuri AC 10 and AC 10x
Motorola: Vanguard 64xx, 3xx, 6520, and 6560 MP Router
Newbridge: 3606, 3608, 3612, and 3620 Main Street products
Nortel: Passport 4430/4450/4700

Cisco IOS Software and Memory Requirements

The Cisco MC3810 in distribution ships with:

8-MB Flash memory
32-MB DRAM memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required DRAM Memory Required

CD381-C-12.0=

IP

12.0(2)T

4 MB

16 MB

CD381-CP-12.0=

IP Plus

12.0(2)T

8 MB

32 MB

CD381-AP-12.0=

Enterprise Plus

12.0(2)T

8 MB

32 MB

Distribution Part Numbers and Ordering Information


Cisco MC3810 Multiservice Access Concentrator¹
MC3810-V-AL	Cisco MC3810 Voice Ready Analog Low Density
MC3810-V-AH	Cisco MC3810 Voice Ready Analog High Density
MC3810-V-DL	Cisco MC3810 Voice Ready Digital Low Density
MC3810-V-DH	Cisco MC3810 Voice Ready Digital High Density
MC3810-V-R	Cisco MC3810 Voice Ready
MC3810-T1	MC3810 Chassis, T1 Digital with MFT, IP Plus s/w
MC3810-4E	MC3810 Chassis, 3 E&M cards, 1 FXO, IP Plus s/w
MC3810-4F	MC3810 Chassis, 3 FXS cards, 1 FXO, IP Plus s/w
MC3810-6E	MC3810 Chassis, 5 E&M cards, 1 FXO, IP Plus s/w
MC3810-6F	MC3810 Chassis, 5 FXS cards, 1 FXO, IP Plus s/w
MC3810-DV	MC3810 Chassis, T1 Digital with MFT, IP Plus s/w
MC3810-DVE	MC3810 Chassis, E1 Digital with MFT, IP Plus s/w
Cisco MC3810 Modules
MC3810-MFT-BNC=	3810 Multiflex Trunk w/ E1-BNC Interface
MC3810-MFT-E1=	3810 Multiflex Trunk w/ RJ-48 E1 Interface
MC3810-MFT-EUS	3810 Multiflex Trunk w/ E1-BNC & BRI (S/T) Interfaces
MC3810-MFT-T1=	3810 Multiflex Trunk w/ RJ-48 T1 Interface
MC3810-APM-EM=	E&M Analog Personality Module
MC3810-APM-FXO=	FXO Analog Personality Module
MC3810-APM-FXS=	FXS Analog Personality Module
MC3810-AVM6=	6-port Analog Voice Interface
MC3810-DVM-BNC=	MC3810 E1 Unbalanced Digital Voice Interface
MC3810-DVM-E1=	MC3810 Digital Voice Interface E1 Card
MC3810-DVM-T1=	MC3810 Digital Voice Interface T1 Card
MC3810-VCM3=	3 DSP Voice Compression Module
MC3810-VCM6=	6 DSP Voice Compression Module
MC3810-BVM=	MC3810 BRI Voice Module
MC3810-VDM=	MC3810 Video Dial Module
Cisco MC3810 Software Feature Packs
CD381-C-12.0=	Cisco MC3810, IP Feature Pack
CD381-CP-12.0=	Cisco MC3810, IP Plus Feature Pack
CD381-AP-12.0=	Cisco MC3810, Enterprise Plus Feature Pack
Cisco MC3810 Memory Options
MEM-381-1X8F=	Cisco MC3810, 8MB Flash Memory
MEM-381-1X32D=	Cisco MC3810, 32MB DRAM Memory
Cisco MC3810 Accessories
MC3810-DC48=	MC3810, -48 VDC Power Supply (Spare)
MC3810-AC40=	MC3810, 100-220VAC Power Supply (Spare)
Cisco MC3810 Basic Maintenance
CON-SNT-PKG7	Cisco 3810 Series SMARTnet Maintenance

For More Information

See the Cisco MC3810 Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/c3800/

Cisco 4000 Series

The Cisco 4000 Series routers are the leading modular midrange/regional routers in the industry. The modular interfaces supported include Ethernet, Fast Ethernet, Token Ring, ISDN Basic Rate Interface (BRI), ISDN Primary Rate Interface (PRI), serial and channelized T1/E1, async, ATM, Fiber Distributed Data Interface (FDDI), and High-Speed Serial Interface (HSSI).

The full suite of high-speed LAN support (Fast Ethernet, FDDI, ATM) provides the investment protection necessary for a platform that can grow with the increased local bandwidth generated from multimedia applications and the migration from a shared to a switched environment. Their high-performance RISC CPUs make the Cisco 4500-M and 4700-M excellent choices for supporting software functionality that is either calculation intensive or process switched. This performance, in conjunction with high-density synchronous and asynchronous serial interfaces, makes the Cisco 4000 Series a particularly good fit for integrating legacy equipment and protocols such as SNA into a robust, end-to-end IP network.

When to Sell

Sell This Product

When a Customer Needs These Features

Cisco 4500-M

Full suite of high-speed media (Fast Ethernet, FDDI, ATM, HSSI)
Calculation-intensive or process-switched Cisco IOS software features such as encryption and compression, certain IBM protocols, protocol translation, and X.25 switching
High-density LAN connectivity (up to 12 Ethernet ports, or 6 Token Ring ports, or a combination thereof)
Legacy environments requiring high-density synchronous and asynchronous serial support

Cisco 4700-M

30-50 percent higher performance for future growth, multiple high-speed interfaces, or configurations with multiple Cisco IOS security, QoS, and accounting features enabled
64-MB main memory for large Internet route tables

Key Features

Supports a full suite of Cisco IOS feature sets; customers can cost-effectively choose from a rich set of protocols (IP, Internetwork Packet Exchange [IPX], AppleTalk, DEC, VINES, and so on), QoS, security, redundancy and WAN optimization, and management and accounting features supported by the Cisco IOS software
High-performance RISC architecture to support high-speed media (Fast Ethernet, ATM, FDDI, HSSI) and calculation/process switching-intensive features
Optional redundant power system for very high reliability

Specifications

Feature	Cisco 4500-M	Cisco 4700-M
Fixed Ports	None	None
Modular Slots	3	3
LAN Modules	2-port 10 MB, Full Duplex 6-port 10BaseT Module 1-port 100BaseTX Module 1-port Token Ring Module 2-port Token Ring Module 1-port FDDI Module- Dual-Attached, multimode 1-port FDDI Module- Dual-Attached, single mode 1-port FDDI Module- Single-Attached	Same as Cisco 4500-M
WAN Modules	4-port BRI (S/T) 8-port BRI (S/T) 2-port Serial 4-port Serial 2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 & V.35 Support 2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 & X21 Support 2-port Serial, 16-port Async/Sync Serial (low speed) w/ EIA/TIA232 Support 2-port Serial, 16-port Async/Sync Serial (low speed) w/ V.35 Support 2-port Serial, 16-port Async/Sync Serial w/ X.21 Support 1-port Channelized T1/PRI 1-port HSSI	Same as Cisco 4500-M
Processor Speed (type)	100-MHz (IDT Orion RISC)	133-MHz (IDT Orion RISC)
Flash Memory	4 MB (default) 16 MB (max)	4 MB (default) 16 MB (max)
Shared Memory	4 MB (default) 8 or 16 MB (max)	4 MB (default) 16 MB (max) Secondary cache memory 512 KB
DRAM Memory	16 MB (default) 32 MB (max)	16 MB (default) 32 or 64 MB (max)
Power Supply	AC, DC, and RPS options	AC, DC, and RPS options
Dimensions (HxWxD)	3.4 x 17.6 x 17.7 in.	3.4 x 17.6 x 17.7 in.
Service Category	11	12

Competitive Products

3Com: NETBuilder II
Bay: ASN

Cisco IOS Software and Memory Requirements

The Cisco 4000 Series in distribution ships with

4-MB Flash memory
16-MB DRAM memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required¹ DRAM Memory Required1

CD45-C-11.2=

IP only

11.2(14)P

4 MB

16 MB

CD45-CP-11.2=

IP Plus

11.2(14)P

4 MB

16 MB

CD45-CW-11.2=

IP Plus 40

11.2(14)P

4 MB

16 MB

CD45-CY-11.2=

IP Plus 56

11.2(14)P

4 MB

16 MB

CD45-B-11.2=

IP/IPX/AT/DEC

11.2(14)P

4 MB

16 MB

CD45-BW-11.2=

IP/IPX/AT/DEC Plus

11.2(14)P

8 MB

16 MB

CD45-BY-11.2=

IP/IPX/AT/DEC Plus 40

11.2(14)P

8 MB

16 MB

CD45-BP-11.2=

IP/IPX/AppleTalk/DECnet Plus 56

11.2(14)P

8 MB

16 MB

CD45-A-11.2=

Enterprise

11.2(14)P

8 MB

16 MB

CD45-AP-11.2=

Enterprise Plus

11.2(14)P

8 MB

16 MB

CD45-AW-11.2=

Enterprise Plus 40

11.2(14)P

8 MB

16 MB

CD45-AY-11.2=

Enterprise Plus 56

11.2(14)P

8 MB

16 MB

¹Bold numbers indicate that more memory than the default amount is needed to run the Feature Pack.

Distribution Part Numbers and Ordering Information


Cisco 4000 Series Router Chassis ¹
CISCO4500-M-CH	3-slot Modular Chassis (100-MHz Processor), IP s/w
CISCO4700-M-CH	3-slot Modular Chassis (133-MHz Processor), IP s/w
Cisco 4000 Series LAN Modules
NP-2E-FDX=	2-port 10bTX (full duplex)
NP-6E=	6-port 10bT Module
NP-1FE=	1-port 100bTX Module
NP-1RV2=	1-port Token Ring Module
NP-2R=	2-port Token Ring Module
NP-1F-D-MM=	1-port FDDI Module (dual-attached, multimode)
NP-1F-D-SS=	1-port FDDI Module (dual-attached, single mode)
NP-1F-S-M=	1-port FDDI Module (single-attached)
Cisco 4000 Series WAN Modules
NP-4B=	4-port BRI (S/T) Module
NP-8B=	8-port BRI (S/T) Module
NP-2T=	2-port Serial Module
NP-4T=	4-port Serial Module
NP-CT1=	1-port Channelized T1/PRI Module
NP-2T16S-232V35=	2-port Serial, 16-port Async/Sync Serial (low speed) w/ RS232 & V.35 Support
NP-2T16S-232X21=	2-port Serial, 16-port Async/Sync Serial (low speed) w/ RS232 & X21 Support
NP-2T16S-RS232=	2-port Serial, 16-port Async/Sync Serial (low speed) w/ RS232 Support
NP-2T16S-X21=	2-port Serial, 16-port Async/Sync Serial w/ X.21 Support
NP-2T16S-V.35=	2-port Serial, 16-port Async/Sync Serial (low speed) w/ V.35 Support
NP-1HSSI=	1-port HSSI Module
Cisco 4000 Series Software Feature Packs
CD45-C-11.3=	Cisco 4500/4700, IP Feature Pack
CD45-CP-11.3=	Cisco 4500/4700, IP Plus Feature Pack
CD45-CW-11.3=	Cisco 4500/4700, IP Plus 40 Feature Pack
CD45-CY-11.3=	Cisco 4500/4700, IP Plus 56 Feature Pack
CD45-CL-11.3=	Cisco 4500/4700, IP Plus IPSec 56 Feature Pack
CD45-B-11.3=	Cisco 4500/4700, IP/IPX/AT/DEC Feature Pack
CD45-BP-11.3=	Cisco 4500/4700, IP/IPX/AT/DEC Plus Feature Pack
CD45-AP-11.3=	Cisco 4500/4700, Enterprise Plus Feature Pack
CD45-AW-11.3=	Cisco 4500/4700, Enterprise Plus 40 Feature Pack
CD45-AY-11.3=	Cisco 4500/4700, Enterprise Plus 56 Feature Pack
CD45-AL-11.3=	Cisco 4500/4700, Enterprise Plus IPSec 56 Feature Pack
Cisco 4000 Series Memory Options
MEM-4500M-4F=	Cisco 4500/4700, 4 MB Flash Upgrade
MEM-4500M-16F=	Cisco 4500/4700, 16 MB Flash Upgrade
MEM-4500M-8S=	Cisco 4500/4700, 8 MB Shared Upgrade
MEM-4500M-16S=	Cisco 4500/4700, 16 MB Shared Upgrade
MEM-4500M-16D=	Cisco 4500/4700, 16 MB Main Upgrade
MEM-4500M-32D=	Cisco 4500/4700, 32 MB Main Upgrade
MEM-4700M-64D=	Cisco 4700, 64 MB Main Upgrade (for Cisco 4700M only)
Cisco 4000 Series Accessories
ACS-NPRM=	Cisco 4000 Series, 19-Inch Rack Mount Kit
ACS-4000RPS=	Cisco 4000 Series, RPS Field Upgrade
Cisco 4000 Series Basic Maintenance
CON-SNT-PKG11	Cisco 4500 Series SMARTnet Maintenance
CON-SNT-PKG12	Cisco 4700 Series SMARTnet Maintenance

For More Information

See the Cisco 4000 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/4000/

Cisco AS5200/AS5300 Series

The AS5200/AS5300 series products are high-performance, medium- to high-density universal access servers that deliver hybrid asynchronous serial and ISDN line service to accommodate both mobile users and high-bandwidth users. By terminating analog modem, ISDN, and voice (AS5300) calls on the same chassis from the same trunk line, the AS5200/AS5300 products enable ISPs and enterprise network managers to meet traditional analog dial access needs, while supporting the growing demand for multiservice access. Also available are the high-end dial platforms---AS5800 and AccessPath.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco AS5200	Lowest possible price per port Hybrid async/ ISDN V.110 support for GSM cellular data Combines LAN, WAN, and async line support in a single package
Cisco AS5300	High performance async/ ISDN/VoIP IP telephony option Full range of Cisco IOS options Best-of-breed modem management Distributed access pools with WAN backhaul

Key Features

Universal access provides the ability to answer ISDN, 56K modem, and voice calls
Full support for Cisco IOS software
Industry-leading price/performance in the remote access market
Scalability and investment protection through redundant backhaul support
Key component of Dial Access Stack Architecture (DASA)
Supports all protocols and services on all asynchronous ports---including users dialing in, as well as asynchronous routing and users dialing out
Accommodates two PRI/T1 or PRI/E1 lines (AS5200); eight PRI/TI or PRI/EI lines (AS5300)
One 10-MB and one 10/100 MB Ethernet to allow for redundant, high-speed backhaul (AS5300)
AS5200 terminates up to 120 concurrent modem/ISDN data calls
AS5300 terminates up to 240 concurrent modem/ISDN data calls or up to 120 voice and FAX calls (E1)
The AS5300 is a voice over IP-capable machine

Specifications

Feature	AS5200	AS5300
Fixed LAN Ports (connections)	1-port Ethernet (10BaseT)	2-port Ethernet (one 10BaseT and one 100BaseT)
Fixed WAN Ports (connections)	2-port sync serial 2-port PRI (T1/E1)	4-port PRI (T1/E1) 8-port PRI (T1/E1) 4-port PRI sync serial
Modular Slots	3	3
Modules and Cards Available	MICA Carrier Card MICA Carrier Card and 4 Mica 6-port Modem Module MICA Carrier Card and 5 Mica 6-port Modem Module 12-port Microcom Modem Module Microcom/V110 Carrier Card Microcom CC + Two 12-port Microcom Modules Dual T1/PRI Card 6-Port MICA Modem Module	MICA Carrier Card Quad T1/PRI Card Quad E1/PRI Card-Balanced/Unbalanced Octal T1/PRI Card Octal E1/PRI Card-Balanced/Unbalanced VFC Carrier Card 6-Port MICA Modem Module
Processor Speed (type)	20-MHz (68030)	150-MHz (R4700)
Maximum Async Connections	48 (60 E1)	240
Flash Memory	16 MB (default) 16 MB (max)	8 MB boot Flash (default) 8 MB system Flash (default)
Shared Memory	4 MB (default) 16 MB (max)	16 MB packet (default) 16 MB main (max)
DRAM Memory	8 MB (default) 16 MB (max)	32 MB (default with Quad card) 64 MB (default with Octal card)
Power Supply	AC or DC	Single AC or DC (default) Internal Redundant AC or DC
Dimensions (HxWxD)	3.5 x 17 x 15 in.	3.5 x 17.5 x 18.25 in.
Service Category	13	14

Competitive Products

AS5200	AS5300
3Com: SuperStack II, RA 300, and USR TCH Ascend: MAX 4000 Lucent: PM-3 Nortel: Bay Versalar 8000	3Com: TCH HiPer Ascend: MAX 6000 Lucent: PM-3 Nortel: Bay Versalar 5000 Nortel: CVX 1800

Cisco IOS Software and Memory Requirements

The Cisco AS5200 in distribution ships with:

16-MB Flash memory
8-MB DRAM memory
4-MB Shared memory
8-MB Boot Flash memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required DRAM Memory Required Shared Memory Required Boot Flash Memory Required

CD52-C-12.0=

IP only

12.0(3)T

16 MB

8 MB

4 MB

8 MB

CD52-CP-12.0=

IP Plus

12.0(3)T

16 MB

8 MB

4 MB

8 MB

CD52-B-12.0=

Desktop

12.0(3)T

16 MB

8 MB

4 MB

8 MB

CD52-BP-12.0=

Desktop Plus

12.0(3)T

16 MB

8 MB

4 MB

8 MB

CD52-A-12.0=

Enterprise

12.0(3)T

16 MB

8 MB

4 MB

8 MB

CD52-AP-12.0=

Enterprise Plus

12.0(3)T

16 MB

8 MB

4 MB

8 MB

The Cisco AS5300 in distribution ships with:

8-MB Flash memory
32-MB DRAM memory with Quad card; 64-MB with Octal card
16-MB Shared memory
8-MB Boot Flash memory

To run the Cisco IOS Feature Packs, you need the amount of memory shown in the following table:

Distribution Part Number Feature Pack Description IOS Image Release Flash Memory Required DRAM Memory Required Shared Memory Required Boot Flash Memory Required

CD53-C-12.0=

IP only

12.0.2XD

8 MB

32 MB

16 MB

4 MB

CD53-CP-12.0=

IP Plus

12.0.2XD

8 MB

32 MB

16 MB

4 MB

CD53-B-12.0=

Desktop

12.0.2XD

8 MB

32 MB

16 MB

4 MB

CD53-BP-12.0=

Desktop Plus

12.0.2XD

8 MB

32 MB

16 MB

4 MB

CD53-A-12.0=

Enterprise

12.0.2XD

8 MB

32 MB

16 MB

4 MB

CD53-AP-12.0=

Enterprise Plus

12.0.2XD

8 MB

32 MB

16 MB

4 MB

Distribution Part Numbers and Ordering Information


Cisco AS5200 Series¹ Cisco AS5200 Access Server MICA Bundles

AS5224-DM-CH	AS5200 Chassis, 24 MICA® technology Modems, Dual T1, 1 MICA CC
AS5248-DM-CH	AS5200 Chassis, 48 MICA technology Modems, Dual T1, 2 MICA CC
Cisco AS5200 Modules/Cards
AS52-CC-DM=	MICA Carrier Card
AS52-24DM-CC=	MICA Carrier Card and 4 Mica 6-port Modem Module
AS52-30DM-CC=	MICA Carrier Card and 5 Mica 6-port Modem Module
AS52-12MCOM=	12-port Microcom Modem Module
AS52-24MCOM-CC=	Microcom CC + Two 12-port Microcom Modules
AS52-2CT1=	Dual T1/PRI Card
AS52-CC-MCOM=	Microcom/V110 Carrier Card
6DM=	6-Port MICA Modem Module
Cisco AS5200 Series Modem Management Technology Licenses²
FR52-MMTL-24=	Modem Management Technology License (24 Modems)
FR52-MMTL-30=	Modem Management Technology License (30 Modems)
FR52-MMTL-48=	Modem Management Technology License (48 Modems)
FR52-MMTL-60=	Modem Management Technology License (60 Modems)
FR52-MMTL-24/48=	Modem Management Technology License Upgrade (24 to 48)
FR52-MMTL-24/60=	Modem Management Technology License Upgrade (24 to 60)
FR52-MMTL-30/60=	Modem Management Technology License Upgrade (30 to 60)
FR52-MMTL-48/60=	Modem Management Technology License Upgrade (48 to 60)
Cisco AS5200 Series Software Feature Packs
CD52-C-12.0=	Cisco AS5200 Series, IP only Feature Pack
CD52-CP-12.0=	Cisco AS5200 Series, IP Plus Feature Pack
CD52-B-12.0=	Cisco AS5200 Series, Desktop Feature Pack
CD52-BP-12.0=	Cisco AS5200 Series, Desktop Plus Feature Pack
CD52-A-12.0=	Cisco AS5200 Series, Enterprise Feature Pack
CD52-AP-12.0=	Cisco AS5200 Series, Enterprise Plus Feature Pack
Cisco AS5200 Series Memory Options
MEM-1X16-AS52=	Cisco AS5200 Series, 16 MB Flash SIMM (Dual Flash Bank)
MEM-8S-52=	Cisco AS5200 Series, 4 MB to 8 MB Shared DRAM Upgrade
MEM-16S-52=	Cisco AS5200 Series, 4 MB to 16 MB Shared DRAM Upgrade
MEM-16M-52=	Cisco AS5200 Series, 12 MB to 16 MB Main DRAM Upgrade
MEM-8BF-52=	Cisco AS5200 Series, 4 MB to 8 MB Boot Flash Upgrade
Cisco AS5200 Series Accessories
AS5200RM-19=	Cisco AS5200 Series, 19-inch Rack Mount Kit
AS5200RM-24=	Cisco AS5200 Series, 24-inch Rack Mount Kit
ACS-2500ASYN=	Cisco 2500/AS5200 Series, AUX/Console Part Cable Kit
Cisco AS5200 Series Basic Maintenance
CON-SNT-PKG13	Cisco AS5200 Series SMARTnet Maintenance

Cisco AS5300 Series¹ Cisco AS5300 Series Access Server Bundles

AS53-48-CH

AS5301-CH, 48 Modems w/ Quad T1/PRI, IP s/w

AS53-96-CH

AS5301-CH, 96 Modems w/ Quad T1/PRI, IP s/w

AS53-96-RPS-CH

AS5301-CH, 96 Modems w/ Quad T1/PRI, RPS, IP s/w

AS53-108-CH

AS5301-CH, 108 Modems w/ Quad T1/PRI, IP s/w

AS53-192-RPS-CH

AS5300 Chassis, 192 Modems, Octal T1/PRI, Red AC Pwr, IP s/w

Cisco AS5300 Series Modules

AS53-4CT1=

Quad T1/PRI Card

AS53-4CE1=

Quad E1/PRI Card-Balanced/Unbalanced, Spare

AS53-CC-DM=

MICA Carrier Card

6DM=

6-Port MICA Modem Module

12DMM=

12-port Digital Modem Module (DMM)

AS53-48-C=

MICA Carrier Card and 8 MICA 6-port Modem Modules

AS53-4CT1+=

Quad T1/PRI Plus High Speed Serial

AS53-8CT1+=

Octal T1/PRI Plus High Speed Serial

AS53-96-CC2=

MICA CC2 carrier card and 8 MICA 12-port DMM modem modules

AS53-CC2-DM=

HMM/DMM MICA2 Carrier Card

Cisco AS5300 Series Modem Management Technology Licenses²

FR53-MMTL-48=

Modem Management Technology License (48 Modems)

FR53-MMTL-60=

Modem Management Technology License (60 Modems)

FR53-MMTL-96=

Modem Management Technology License (96 Modems)

FR53-MMTL-108=

Modem Management Technology License (108 Modems)

FR53-MMTL-120=

Modem Management Technology License (120 Modems)

Cisco AS5300 Series Software Feature Packs

CD53-C-12.0=

Cisco AS5300, IP only Feature Pack

CD53-CP-12.0=

Cisco AS5300, IP Plus Feature Pack

CD53-B-12.0=

Cisco AS5300, Desktop Feature Pack

CD53-BP-12.0=

Cisco AS5300, Desktop Plus Feature Pack

CD53-A-12.0=

Cisco AS5300, Enterprise Feature Pack

CD53-AP-12.0=

Cisco AS5300, Enterprise Plus Feature Pack

Cisco AS5300 Series Memory Options

MEM-16F-AS53=

Cisco AS5300, 8 MB to 16 MB Flash Upgrade

MEM-64M-AS53=

Cisco AS5300, 32 MB to 64 MB Main DRAM Upgrade

MEM-8BF-AS53=

Cisco AS5300, 4 MB to 8 MB Boot Flash Upgrade

Cisco AS5300 Series Accessories

AS5300RM-19=

Cisco AS5300, 19-Inch Rack Mount Kit

AS5300RM-24=

Cisco AS5300, 24-Inch Rack Mount Kit

AS53-AC-RPS=

Cisco AS5300, Dual AC Power Supply

Cisco AS5300 Series Basic Maintenance

CON-SNT-PKG14

Cisco AS5300 Series SMARTnet Maintenance

¹For the latest part number and pricing information, see the Distribution Product Reference Guide Web site: http://www.cisco.com/dprg. (Only available in some countries at this time; worldwide rollout in place.)
²Requires Plus feature pack.

For More Information

See the Cisco AS5200 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/accserv/as5200/

and the Cisco AS5300 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/accserv/as5300/

Cisco AS5300/Voice Gateway

The Cisco AS5300/Voice Gateway is an award-winning, high performance, Voice-over-IP (VoIP) gateway. It interfaces directly to digital switches, PBXs, and public telephone networks to carry/switch voice traffic across IP/packet networks. The AS5300/Voice Gateway is fully equipped with high-density Voice Feature Cards (VFCs) and voice-enabled Cisco IOS software, to support carrier-class VoIP and FAX-over-IP services. Furthermore, it is H.323 compliant and includes a family of industry voice CODECs including G.711 (64kb/s), G.729 (8kbps), and G.723.1 (5.3/6.3kbps), and also supports up to 14.4kbps Fax Relay. In addition to an integrated IVR system, it also includes RADIUS for generating call detail records (for billing and authentication) and SNMP for network/element management applications.

The AS5300/Voice Gateway supports 96 voice/fax channels in the 4-T1 configuration, and 120 voice/fax channels in the 4-E1 configuration.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco AS5300/Voice Gateway	Carrier class/industry leading voice quality: essential for SP applications, especially for the most demanding wholesale voice, long-distance voice, and corporate/enterprise applications. Digital T1/E1/PRI interfaces and integrated CSUs: essential for interfacing to digital switches, PBXs, and PSTN around the world, with no additional equipment.

Key Features

Industry leading and award-winning voice quality and performance
Supports up to 96 voice calls in 4 T1 configuration
Supports up to 120 voice/fax calls in 4 T1 configuration
Deployed world-wide
2 RU (rack unit) form factor
Provides easy, low cost entry into voice applications vs. expensive TDM products
Highly scalable
Supports Direct Inward Dial (DID) and 2-Stage applications with integrated IVR
Perfect for Service Provider and Enterprise applications
Interfaces to digital switches and PBXs
H.323 compliant

Specifications

Feature	AS5300/Voice Gateway
Fixed LAN Ports (connections)	2-port Ethernet (one 10bT, one 10/100bT, FE)
Fixed WAN Ports (connections)	4 T1 (AS5300 - 96VoIP) 4 E1 (AS5300 -120VoIP)
Modular Slots	3 (one for Quad T1/E1, two for VoIP feature cards)
Modules and Cards Available	All VoIP modules are already installed with this configuration
Maximum Voice/Fax Channels	96 voice channels with 4 T1 config;120 with 4 E1 config
Processor Speed (type)	150-MHz (R4700 RISC)
Flash Memory	16 MB
DRAM Memory	64 MB main DRAM
Power Supply	AC (AC dual/redundant, and DC versions optional)
Dimensions (HxWxD)	3.4 x 17.5 x 18.25 in.

Competitive Products

3Com: Total Control
Ascend: TNT, MAX 6000
Clarent: Gateway 3.0
Lucent: PM-4/PacketStar
Nuera: F200ip
VocalTec: Ensemble

Distribution Part Numbers


Cisco AS5300/Voice Gateway¹
Cisco AS5300/Voice Gateway¹
AS5300-96VoIP-A	A fully configured, 96 channel, Cisco AS5300/Voice Gateway system for T1/North America applications; it includes: AS5300 base unit 4 T1, 96 voice/fax channels IOS, IP Voice Plus, SF53-CVP All voice CODEC feature set software, VC-SWA-4.0x 16 MB Flash 64 MB DRAM AC power supply (DC or dual/redundant optional)
AS5300-120VoIP-A	A fully configured, 120 channel, Cisco AS5300/Voice Gateway system for E1/International applications. It includes: AS5300 base unit 4 E1, 120 voice/fax channels IOS, IP Voice Plus, SF53-CVP All voice CODEC feature set software, VC-SWA-4.0x 16 MB Flash 64 MB DRAM AC power supply (DC or dual/redundant optional)

For More Information

See the Cisco AS5300/Voice Gateway Web site: http://www.cisco.com/warp/public/cc/cisco/mkt/access/accserv/as5300/prodlit/vffc_ds.htm

Cisco AS5800/AccessPath ²

The Cisco high-end dial products are high-performance, high-density universal access servers that deliver hybrid asynchronous serial and ISDN line service to accommodate both mobile users and high-bandwidth users. By terminating both analog modem and ISDN calls on the same chassis from the same trunk line, the AS5x00 enables carrier-class service providers and enterprise network managers to meet traditional analog dial access needs, while supporting the growing demand for high-speed ISDN access. Products in this family include the AS5800 and AccessPath series. Also available are the midrange platforms---the AS5200 and AS5300.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco AS5800	High-density single system Highly available single system with multiple areas of redundancy Service provider or IP-focused installations Large scale system management with Cisco's System Controller
AccessPath	Large scale integrated solution Data or IP telephony concentrator Rapid deployment (integrated, pre-assembled, and preconfigured) Terminates up to 5040 concurrent data calls and up to 2520 concurrent VoIP calls Multiprotocol

Key Features

Cisco AS5800
- Universal access provides ability to answer both ISDN and 56K modems
- Key component of Dial Access Stack Architecture (DASA)
- NEBS compliant
- Large scale system management with Cisco's System Controller
- Up to 48 Channelized T1/E1/PRI or 2 Channelized T3 interfaces
- Distributed, multiprocessor design for maximum performance and growth
AccessPath
- Complete NEBS compliant solution for Dial and IP Telephony POPs, preconfigured and integrated at Cisco
- Terminates up to 5040 concurrent data calls and up to 2520 VoIP calls
- Up to 168 Channelized T1/E1/PRI or 6 Channelized T3 interfaces

Specifications

Feature	AS5800	AccessPath TS3/VS3
Expansion Slots	14	21
Maximum Port Capacity¹	1344 for both voice and data	5040 data 2520 voice ports
Processor Speed (type)	200-MHz (R5000 RISC) Router shelf: 300 MHz (R3000)	Dial shelf: 150 MHz (R4700) Router shelf: 200 MHz (R5000) System controller: 100 MHz (RISC)
Flash Memory	4 MB Boot Flash 16 MB PCMCIA	Dial shelf: 8 MB Router shelf: 20 MB System controller: 8 MB
Shared Memory	4 MB SRAM	Dial shelf: 16 MB
DRAM Memory	64 MB (default) 128 MB (max)	Dial shelf: 16 MB Router shelf: 64 MB System controller: 16 MB
Power Supply	Redundant/loadsharing AC or DC	Redundant/loadsharing AC or DC
Dimensions (HxWxD)	33.25 x 17.5 x 24 in.	79.5 x 25.94 x 30 in.

¹Dual router shelves are required for more than 1000 connections.

Competitive Products

3Com: TCH HiPer
Ascend: MAX TNT
Lucent: PM-4
Nortel: Aptis CVX 1800

For More Information

See the Cisco AS5800 Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/accserv/5800/

and the AccessPath Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/access/apath/

Cisco 7100 Series

The Cisco 7100 Series VPN Router is a full-featured, high-end, integrated VPN solution melding high-speed, industry leading routing with a comprehensive suite of VPN services. The Cisco 7100 Series VPN Router integrates key features of VPNs---tunneling, data encryption, security, firewall, advanced bandwidth management, and service level validation---to provide secure, scalable VPN platforms to better and more cost-effectively accommodate remote-access, remote-office, and extranet connectivity using public data services. The Cisco 7100 Series VPN Router offers specific hardware configurations optimized for VPN applications and network topologies. Embedded WAN and Fast Ethernet interfaces combined with high-performance routing and rich VPN services provide turnkey VPN routing solutions.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 7120	Entry-level Cisco 7100 Series VPN Router designed for 50+ Mbps, single WAN interface VPN environments
Cisco 7140	Customers seeking a high-end, VPN centric platform for central site remote access, intranet, and extranet applications Provides superior routing and VPN services performance for 90+Mbps VPN environments, as well as dual WAN interfaces and power supplies for increased VPN solution reliability

Key Features

Comprehensive suite of VPN services---tunneling, data encryption, security, firewall, advanced bandwidth management, and service level validation---integrated with industry leading routing
High performance RISC processor delivering high-speed, scalable VPN services and routing throughput and extensive memory for reliable, high-speed VPN services delivery
Single and dual-homed embedded WAN interfaces ranging from nxT1/E1 to DS-3/E3 and OC-3 for connectivity to the VPN and embedded dual autosensing 10/100BaseT Fast Ethernet ports for connectivity to the corporate LAN
Service Module slot providing a modular architecture for hardware acceleration of VPN services, like encryption and compression providing 2000 sessions and 3DES IPSec encryption at 90 Mbps
One expansion slot for LAN/WAN interface extensibility utilizing a Cisco 7xxx Series port adapter

Specifications

Feature	Cisco 7120	Cisco 7140
Embedded Dual 10/100BaseT Fast Ethernet Interfaces	Autosensing, RJ-45	Autosensing, RJ-45
Embedded WAN interface (by model)	One of the following included, embedded: 7120-4T1: 4T1/E1 serial with 5-in-1 serial interface supporting EIA/TIA-232, EIA/TIA-449, EIA-530, X.21, and V.35 7120-T3: T3 serial with integrated DSU and BNC connectors 7120-E3: E3 serial with integrated DSU and BNC connectors 7120-AT3: T3 ATM with BNC connectors 7120-AE3: E3 ATM with BNC connectors 7120-SMI3: OC3 ATM with SC connectors	One of the following included, embedded: 7140-2T3: Dual T3 with integrated DSU and BNC connectors 7140-2E3: Dual E3 with integrated DSU and BNC connectors 7140-2AT3: Dual T3 ATM with BNC connectors 7140-2AE3: Dual E3 ATM with BNC connectors 7140-2MM3: Dual OC3 ATM with SC connectors
Physical Interfaces	EIA/TIA-232, EIA/TIA-449, X.21, V.35, EIA-530, EIA/TIA-612, EIA/TIA-613, UNI 3.X, G.707, G.708, and SONET/SDH optical fiber (OC-3 or STM-1)	Same as Cisco 7120
WAN/LAN Interface Expansion Slot	1 slot	1 slot
Supported Network Port Adapters	Fast Ethernet 100BaseTX and 100BaseFX Fast Ethernet/ISL TX and ISL FX Ethernet 10BaseT and 10BaseFL Dedicated Token Ring ATM Synchronous Serial HSSI ISDN BRI	Same as Cisco 7120
Service Module Slot	1 slot	1 slot
Supported Service Modules	Integrated Services Module (ISM)	Integrated Services Module (ISM)
Console and Auxiliary Ports	1 of each, RJ-45 interface	1 of each, RJ-45 interface
SDRAM	64 MB packet 64 MB system (expandable to 256 MB)	64 MB packet 64 MB system (expandable to 256 MB)
Flash Memory	40 MB	40 MB
PCMCIA Slots for Flash Memory	2	2
Power Supply	Single AC	Dual AC
Dimensions (HxWxD)	3.5 in. x 17.5 in. x 18.25 in.	3.5 in. x 17.5 in. x 18.25 in.

Competitive Products

Nortel (Bay): Contivity 4000, 4500
3Com: PathBuilder S500 Series
Xedia: QVPN Series
OneBox: 1000/3U

Distribution Part Numbers and Ordering Information


Cisco 7120 Series¹
Cisco 7120 Series¹
CISCO7120-4T1	Cisco 7120 Router, 4-Port serial WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
CISCO7120-T3	Cisco 7120 Router, single T3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
CISCO7120-E3	Cisco 7120 Router, single E3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
CISCO7120-AT3	Cisco 7120 Router, single ATM T3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
CISCO7120-AE3	Cisco 7120 Router, single ATM E3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
CISCO7120-SMI3	Cisco 7120 Router, single ATM OC3-SMI WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, 1 AC power supply, IP software
Cisco 7140 Series
Cisco 7140 Series
CISCO7140-2T3	Cisco 7140 Router, Dual T3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, dual AC power supply, IP software
CISCO7140-2E3	Cisco 7140 Router, Dual E3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, dual AC power supply, IP software
CISCO7140-2AT3	Cisco 7140 Router, Dual ATM T3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, dual AC power supply, IP software
CISCO7140-2AE3	Cisco 7140 Router, Dual ATM E3 WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, dual AC power supply, IP software
CISCO7140-2MM3	Cisco 7140 Router, Dual OC3-MM WAN interface, dual 10/100 FE, processor, 64 MB packet memory, 64 MB system memory, 40 MB flash disk, dual AC power supply, IP software
Cisco 7100 Memory Options
Cisco 7100 Memory Options
MEM-7100-FLD40M	Cisco 7100 I/O PCMCIA Flash Disk, 40 MB (included with chassis)
MEM-7100-FLD40M=	Cisco 7100 I/O PCMCIA Flash Disk, 40 MB
MEM-7100-FLD110M=	Cisco 7100 I/O PCMCIA Flash Disk, 110 MB
MEM-7120/40-64P	Cisco 7100 64 MB SDRAM Packet Memory (included with chassis)
MEM-7120/40-64S	Cisco 7100 64 MB SDRAM System Memory (included with chassis)
MEM-7120/40-64P=	Cisco 7100 64 MB SDRAM Packet Memory Spare
MEM-7120/40-64S=	Cisco 7100 64 MB SDRAM System Memory Spare
MEM-7120/40-128S	Cisco 7100 128 MB SDRAM System Memory
MEM-7120/40-128S=	Cisco 7100 128 MB SDRAM System Memory Spare
MEM-7120/40-192S	Cisco 7100 192 MB SDRAM System Memory
MEM-7120/40-256S	Cisco 7100 256 MB SDRAM System Memory
Cisco 7100 Series Spares and Accessories
Cisco 7100 Series Spares and Accessories
PKG-7100=	Cisco 7100 Spare System Packaging Material
SM-BLANK=	Cisco 7100 Service Module Blank Face Plate
MAS-7100-PABLANK=	Port Adapter Slot Blank Face Plate
Cisco 7100 Series Software Options (with chassis)
Cisco 7100 Series Software Options (with chassis)
S71C-12.x.x	Cisco 7100 Series IOS IP (included w/ chassis)
S71CH-12.x.x	Cisco 7100 Series IOS IP/FW
S71CK2-12.x.x	Cisco 7100 Series IOS IP IPSec 3DES
S71CHK2-12.x.x	Cisco 7100 Series IOS IP/FW IPSec 3DES
S71CL-12.x.x	Cisco 7100 Series IOS IP IPSec 56
S71CHL-12.x.x	Cisco 7100 Series IOS IP/FW IPSec 56
S71A-12.x.x	Cisco 7100 Series IOS Enterprise
S71AH-12.x.x	Cisco 7100 Series IOS Enterprise FW
S71AK2-12.x.x	Cisco 7100 Series IOS Enterprise IPSec 3DES
S71AHK2-12.x.x	Cisco 7100 Series IOS Enterprise/FW IPSec 3DES
S71AL-12.x.x	Cisco 7100 Series IOS Enterprise IPSec 56
S71AHK2-12.x.x	Cisco 7100 Series IOS Enterprise/FW IPSec 56
Cisco 7100 Series Software Options (as spares)
Cisco 7100 Series Software Options (as spares)
S71C-12.x.x	Cisco 7100 Series IOS IP
S71CH-12.x.x	Cisco 7100 Series IOS IP/FW
S71CK2-12.x.x	Cisco 7100 Series IOS IP IPSec 3DES
S71CHK2-12.x.x	Cisco 7100 Series IOS IP/FW IPSec 3DES
S71CL-12.x.x	Cisco 7100 Series IOS IP IPSec 56
S71CHL-12.x.x	Cisco 7100 Series IOS IP/FW IPSec 56
S71A-12.x.x	Cisco 7100 Series IOS Enterprise
S71AH-12.x.x	Cisco 7100 Series IOS Enterprise FW
S71AK2-12.x.x	Cisco 7100 Series IOS Enterprise IPSec 3DES
S71AHK2-12.x.x	Cisco 7100 Series IOS Enterprise/FW IPSec 3DES
S71AL-12.x.x	Cisco 7100 Series IOS Enterprise IPSec 56
S71AHK2-12.x.x	Cisco 7100 Series IOS Enterprise/FW IPSec 56
Cisco 7100 Series IOS Feature Set Upgrades
Cisco 7100 Series IOS Feature Set Upgrades
FL71-C-A=	Cisco IOS 7100 Series IP to Enterprise Upgrade
FL71-L=	Cisco IOS 7100 Series IPSec 56 Upgrade
FL71-K2=	Cisco IOS 7100 Series IPSec 3DES Upgrade
FL71-H=	Cisco IOS 7100 Series Firewall Feature Set Upgrade

For More Information

See the Cisco 7100 Series Web site: http://www.cisco.com/go/7100

Cisco 7200 Series

The Cisco 7200 series routers deliver exceptional price/performance to meet the following requirements: regional and branch offices that need gateway connectivity to the WAN and the Internet; remote site aggregation for enterprise and service providers where multiple dispersed locations are interconnected through a central site; sites that require IBM data center connectivity; and sites that require multifunction capabilities that combine all the above for multiservice voice, video, and data traffic.

A key strength of the Cisco 7200 is its modularity. With a choice of 2-, 4- and 6-slot chassis, three processors providing up to 200 kpps, an extensive range of LAN and WAN interfaces with up to 48 ports, and single or dual power supplies, the customer gets the performance and capacity required. This modularity also provides investment protection and a guaranteed expansion path.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 7202	2-slot chassis 100-MHz processor
Cisco 7204	4-slot chassis 100-, 150-, or 200-MHz processor
Cisco 7206	6-slot chassis 100-, 150-, or 200-MHz processor

Key Features

High performance switching---Supports high-speed media and high-density configurations; with its RISC-based and SRAM-configured system processors, the Cisco 7200 can switch up to 200,000 packets per second
Full support for Cisco IOS software and enhancements for high-performance network services---Performs network services including quality of service, security, compression, and encryption at high speed
High port density---Provides high port density and an extensive range of LAN and WAN media, dramatically reducing the cost per port and allowing flexible configuration
Common port adapters---Uses the same port adapters as the Cisco 7500 Versatile Interface Processor (VIP), which simplifies stocking spares and protects customer investment in interfaces
High system availability---Maximizes network uptime through dual power supplies and online insertion and removal of port adapters and power supplies

Specifications

Feature	Cisco 7202	Cisco 7204	Cisco 7206
Fixed Ports	None	None	None
Modular Slots	1 configurable WAN port 1 configurable LAN/WAN port	4	6
LAN Port Adapters	4-port 10BaseT 8-port 10BaseT 5-port 10BaseFL 1-port 100BaseFX 1-port 100BaseTX 2-port 100BaseFX 2-port 100BaseTX 4-port Dedicated Token Ring 4/16 Mbps, Half/Full Duplex 4-port Token Ring 4/16 Mbps 4-port Token Ring 4/16 Mbps, Full Duplex 1-port FDDI Single Mode 1-port FDDI Single Mode, Full Duplex 1-port FDDI Multimode 1-port FDDI Multimode, Full Duplex	Same as Cisco 7202	Same as Cisco 7202
WAN Port Adapters	8-port BRI (S/T) 4-port BRI (U) w/ NT-1 4-port Serial - Enhanced 4-port E1 G.703 Serial, 120 ohm/balanced 4-port E1 G.703 Serial, 75 ohm/unbal 8-port Serial, EIA/TIA 8-port Serial, V.35 8-port Serial, X.21 2-port Channelized E1/PRI, 120 ohm 2-port Channelized E1/PRI, 75 ohm 2-port Channelized T1/PRI 4-port T1 CES + 1-port ATM OC single mode 4-port T1 CES + 1-port ATM T3 4-port E1 OC-3, 120 ohms E3/E1 CES, 120 ohms Channelized DS3, w/ 4-port T1 Breakout Connectors 1-port HSSI 1-port ATM OC-3, multimode 1-port ATM OC-3, single mode	Same as Cisco 7202	Same as Cisco 7202
Service Adapter Modules	None	Compression Encryption	Compression Encryption
Network Processing Engines	NPE-100	NPE-100, 150, or 200	NPE-100, 150, or 200
Processor Speed (type)	100 MHz (MIPS RISC)	100, 150, or 200 MHz (MIPS RISC)	100, 150, or 200 MHz (MIPS RISC)
Flash PCMCIA Memory	16 MB (default); 40 MB (max)	Same as Cisco 7202	Same as Cisco 7202
DRAM Memory	32 MB (default); 128 MB (max)	Same as Cisco 7202	Same as Cisco 7202
Power Supply	AC or DC, dual optional	AC or DC, dual optional	AC or DC, dual optional
Dimensions (HxWxD)	5.25 x 16.8 x 17 in.	5.25 x 16.8 x 17 in.	5.25 x 16.8 x 17 in.
Service Category	13	13	14

Competitive Products

3Com: NETBuilder II
Bay Networks: Backbone Link Node (BLN)
Sentient: Ultimate 1000
Packeteer: PacketShaper 4000

Distribution Part Numbers and Ordering Information


Cisco 7200 Series Router Chassis and Power Supply¹
CISCO7202=	2-slot Modular Router, AC Power Supply
CISCO7204-CH	4-slot Modular Router, AC Power Supply
CISCO7206-CH	6-slot Modular Router, AC Power Supply
Cisco 7200 Series Chassis and ATM Port Adapter Bundles
CISCO7202-A3-OC3MM	C7202 Bundle- 7200Chassis, ATM-OC3MM Port Adapter
CISCO7202-A3-OC3SM	C7202 Bundle- 7200Chassis, ATM-OC3SM Port Adapter
CISCO7202-A3-T3	C7202 Bundle- 7200Chassis, ATM-T3 Port Adapter
CISCO7202-MC-8T1	C7202 Bundle w/ 8-port Multichannel T1 Port Adapter
CISCO7202-OC3SML	C7202 Bundle w/ ATM-OC3SM (LR) Port Adapter
CISCO7202-POS-MM	C7202 Bundle w/ POS OC3 (MM) Port Adapter
CISCO7202-POS-SMI	C7202 Bundle w/ POS OC3 SM (IR) Port Adapter
CISCO7202-T3	C7202 Bundle w/ Serial T3 Port Adapter
Cisco 7200 Series I/O Bundles
C7200-I/O-16M-SW=	7200 Bundle- I/O w/ 16MB Flash and Layer 3 s/w
C72FE-I/O-16M-SW=	7200 Bundle- I/O w/ 16MB Flash, 1-port FE (RJ-45), Layer 3 s/w
Cisco 7200 Series Memory Options for I/O Controllers
MEM-I/O-FLC8M=	8 MB PCMCIA Flash Memory for I/O Controller
MEM-I/O-FLC16M=	I6 MB PCMCIA Flash Memory for I/O Controller
MEM-I/O-FLC20M=	20 MB PCMCIA Flash Memory for I/O Controller
Cisco 7200 Series Network Processing Engines
NPE-100=	Network Processing Engine 100 (Zero SRAM)
NPE-150=	Network Processing Engine 150 (1 MB SRAM)
NPE-200=	Network Processing Engine 200 (4 MB SRAM)
Cisco 7200 Series LAN Port Adapters
PA-4E=	4-port 10bT Port Adapter
PA-8E=	8-port 10bT Port Adapter
PA-FE-TX=	1-port 100bTX Port Adapter
PA-5EFL=	5-port 10bFL Port Adapter
PA-FE-FX=	1-port 100bFX Port Adapter
PA-4R-DTR=	4-port Dedicated Token Ring (4/16 Mbps) Port Adapter (half, full duplex)
PA-4R=	4-port Token Ring (4/16 Mbps) Port Adapter
PA-4R-FDX=	4-port Token Ring (4/16 Mbps), Port Adapter (full duplex)
PA-F-MM=	1-port FDDI Port Adapter (multimode)
PA-F-SM=	1-port FDDI Port Adapter (single mode)
PA-F/FD-MM=	1-port FDDI Port Adapter (multimode, full duplex)
PA-F/FD-SM=	1-port FDDI Port Adapter (single mode, full duplex)
Cisco 7200 Series WAN Port Adapters
PA-8B-S/T=	8-port BRI (S/T) Port Adapter
PA-4B-U=	4-port BRI (U) w/ NT-1 Port Adapter
PA-4T+=	4-port Serial Port Adapter (Enhanced)
PA-8T-232=	8-port Serial Port Adapter (232)
PA-8T-V35=	8-port Serial Port Adapter (V.35)
PA-8T-X21=	8-port Serial Port Adapter (X.21)
PA-4E1G/120=	4-port E1 G.703 Serial Port Adapter (120 Ohm/Balanced)
PA-4E1G/75=	4-port E1 G.703 Serial Port Adapter (75 Ohm/Unbalanced)
PA-2CE1/PRI-120=	2-port Channelized E1/PRI Port Adapter (120 Ohm)
PA-2CE1/PRI-75=	2-port Channelized E1/PRI Port Adapter (75 Ohm)
PA-2CT1/PRI=	2-port Channelized T1/PRI Port Adapter
PA-A1-OC3MM=	1-port ATM OC-3 Port Adapter (multimode)
PA-A1-OC3SM=	1-port ATM OC-3 Port Adapter (single mode, Intermediate Reach)
PA-A2-4T1C-OC3SM=	4-port T1 CES + 1-port ATM OC (single mode) Port Adapter
PA-A2-4T1C-T3ATM=	4-port T1 CES + 1-port ATM T3 Port Adapter
PA-A2-4E1XC-E3ATM=	E3/E1 CES Port Adapter (120 ohms)
PA-A2-4E1XC-OC3SM=	4-port E1 OC-3 Port Adapter (120 ohms)
PA-CT3/4T1=	Channelized DS3 Port Adapter w/ 4-port T1 Breakout Connectors
PA-H=	1-port HSSI Port Adapter
PA-MC-4T1=	Cisco 7200 Series, 4-port Multichannel T1 PA w/ CSU/DSUs
PA-MC-8T1=	Cisco 7200 Series, 8-port Multichannel T1 PA w/ CSU/DSUs
Cisco 7200 Series Service Adapters
S/A-COMP/1=	Service Adapter; Compression (64 VCs Stac)
S/A-COMP/4=	Service Adapter; Compression (256 VCs Stac)
Cisco 7200 Series Software Feature Packs
CD72-R-11.2=	Cisco 7200 Series, Network Layer 3 Switching Feature Pack
CD72-C-11.2=	Cisco 7200 Series, IP only Feature Pack
CD72-BS-11.2=	Cisco 7200 Series, Desktop and IBM Feature Pack
CD72-BSN-11.2=	Cisco 7200 Series, Desktop/IBM/APPN Feature Pack
CD72-A-11.2=	Cisco 7200 Series, Enterprise Feature Pack
CD72-AN-11.2=	Cisco 7200 Series, Enterprise and APPN Feature Pack
Cisco 7200 Series License for Advanced Software Options
FR-IR72=	Cisco 7200 Series, InterDomain Routing License
FR-WPP72=	Cisco 7200 Series, WAN Packet Protocols License
Cisco 7200 Series Memory Options
MEM-NPE-32MB=	Cisco 7200 Series, NPE 32 MB DRAM Upgrade Kit
MEM-NPE-64MB=	Cisco 7200 Series, NPE 64 MB DRAM Upgrade Kit
MEM-NPE-128MB=	Cisco 7200 Series, NPE 128 MB DRAM Upgrade Kit
Cisco 7200 Series Accessories
ACS-7200-RMK=	Cisco 7200 Series, Rack Mount Kit and Cable Management Bracket
PWR-7200-AC	Cisco 7200 Series, AC Power Supply (US Cord)
Cisco 7200 Series Basic Maintenance
CON-SNT-PKG13	Cisco 7202 and 7204 Series SMARTnet Maintenance
CON-SNT-PKG14	Cisco 7206 Series SMARTnet Maintenance

For More Information

See the Cisco 7200 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/core/7200/

Cisco 7500 Series ³

The Cisco 7500 series is Cisco's premier high-end platform of multiprotocol routers. These systems combine Cisco's proven software technology with exceptional reliability, availability, serviceability, and performance features to meet the requirements of today's most mission-critical internetworks. The Cisco 7500 series provides information system professionals with the flexibility they need to meet the constantly changing requirements at the core and distribution points of the internetwork.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 7505	One CyBus Solution for complex networking products in the data center, the workgroup, and the core of the network
Cisco 7507	Dual CyBuses High-bandwidth applications with medium-density requirements
Cisco 7513	Dual CyBuses Ideal solution for large, collapsed backbone environments or as an aggregation router supporting large numbers of remote users
Cisco 7576	Four CyBuses for a total aggregate chassis bandwidth of over 4 Gbps Ideal for high-density, high-bandwidth environments or as an aggregation router supporting access applications

Key Features

High-performance switching---Delivers high performance for mission-critical applications by supporting high-speed media and high-density configurations; using the processing capabilities of the Versatile Interface Processors (VIPs) and Cisco Express Forwarding, the Cisco 7500 series system capacity can exceed a million packets per second
Full support for Cisco IOS software and enhancements for high-performance network services---Performs network services such as quality of service, security, compression, and encryption at high speed; VIP technology extends the performance of these services though distributed IP services feature
High port density---Provides high port density and an extensive range of LAN and WAN media; this feature dramatically reduces the cost per port and allows a flexible configuration
Common port adapters---VIPs use the same port adapters as Cisco 7200, which simplifies sparing and protects customer investment in interfaces

Specifications

Feature	Cisco 7505	Cisco 7507	Cisco 7513	Cisco 7576
Routers per Chassis	1	1	1	2
Fixed Ports	None	None	None	None
Modular Slots	5	7	13	13
Interface Processor Slots	4	5	11	11
RSPs	1 (100-MHz RSP1 or 200-MHz RSP4)	2 (optional dual RSPs; 100-MHz RSP2 and/or 200-MHz RSP4)	2 (optional dual RSPs; 100-MHz RSP2 and/or 200-MHz RSP4)	2 (100-MHz RSP2 and/or 200-MHz RSP4)
LAN Port Adapters	4- or 8-port Ethernet 10BaseT 5-port Ethernet 10BaseFL 1-port Fast Ethernet 100BaseTX 1-port Fast Ethernet 100BaseFX 2-port Fast Ethernet/ISL 100BaseTX 2-port Fast Ethernet/ISL 100BaseFX 1-port 100BaseTx or100BaseFx 4-port Dedicated Token Ring 4/16 Mbps, Half/Full Duplex 4-port Token Ring 4/16 Mbps 4-port Token Ring 4/16 Mbps, Full Duplex 1-port FDDI multimode or single mode 1-port FDDI full duplex multimode or single mode 1-port 100VG	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
WAN Port Adapters	4-port serial, enhanced 8-port serial, V.35, or 232, or x.21 1- or 2-port HSSI 1-port Multichannel E3 1-port Multichannel T3 4-port Multichannel T1 with integrated CSU/DSUs 8-port Multichannel T1 with integrated CSU/DSUs 8-port Multichannel DS1 with integrated DSUs 8-port Multichannel E1 with G.703 120 ohm interface 1-port ATM OC3 single mode IR 1-port ATM OC3 multimode 1-port ATM Enhanced E3 1-port ATM Enhanced DS3 1-port ATM Enhanced OC3c/STM1 multimode 1-port ATM Enhanced OC3c/STM1 single mode (IR) 1-port ATM Enhanced OC3c/STM1 single mode (LR) 1-port POS OC3c/STM1 multimode 1-port POS OC3c/STM1 single mode (IR) 1-port POS OC3c/STM1 single mode (LR) 2-port channelized E1/PRI, 75 or 120 ohm 4-port E1 G.703 serial (75 ohm/unbalanced) 4-port E1 G.703 serial (120 ohm/balanced) 1-port E3 serial with E3 DSU 2-port E3 serial with DSUs 1-port T3 serial with T3 DSUs 2-port T3 serial with T3 DSUs 2-port JT2 6.3-Mbps serial	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
Advanced Technology Interface Processors	Gigabit Ethernet single mode Gigabit Ethernet multimode Packet over SONET OC-3/SDH multimode Packet over SONET OC-3/SDH single mode Channelized DS3	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
Service Adapter Modules	Compression Encryption	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
VIP Modules	VIP2-15, VIP2-40, VIP2-50	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
Processor	Mips RISC	Mips RISC	Mips RISC	Mips RISC
High-Speed Backplane	5 CyBus slots 1 Gbps backplane 4 interface processor slots 1 RSP slot	7 CyBus slots 2 Gbps backplane 5 interface processor slots 2 RSP slots	13 CyBus slots 2 Gbps backplane 11 interface processor slots 2 RSP slots	13 CyBus slots 4 Gbps backplane 11 interface processor slots 2 RSP slots
Boot Memory	256 KB	256 KB	256 KB	256 KB
Shared Memory	16 MB (min) 40 MB (max)	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
DRAM Memory	32 MB (default) 128 MB (RSP2 max) 256 MB (RSP4 max)	Same as Cisco 7505	Same as Cisco 7505	Same as Cisco 7505
Power Supply	AC, dual AC/DC, dual DC	Same as Cisco 7505	Same as Cisco 7505	2 standard, AC, dual AC/DC, dual DC
Dimensions (HxWxD)	10.5 x 17.5 x 17 in.	19.25 x 17.5 x 25 in.	33.75 x 17.5 x 22 in.	33.75 x 17.5 x 22 in.

For More Information

See the Cisco 7500 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/core/7500/

Cisco 12000 Series ⁴

The Cisco 12000 series gigabit switch router (GSR) family is the Cisco's premier gigabit routing platform for service providers. The product provides a cost-effective solution for implementing high bandwidth packet optimized core backbones. The GSR series combines carrier class design with Cisco's proven software technology in delivering a reliable and scalable (bandwidth and performance) system to meet the exponential growth in data traffic. The GSR series provides an industry leading breadth of interfaces including DS3, Fast Ethernet, Gigabit Ethernet, OC-3/Synchronous Transport Module level (STM-1), OC-12/STM-4, >and OC-48/STM-16.

When to Sell

Sell This Product	When a Customer Needs These Features
Cisco 12008	40 Gbps switching capacity High density broadband interfaces per system (up to 84 DS3 to 7 OC48/STM16 per rack) Compact design, ideal solution for high port densities per 7 ft rack (up to 252 DS3 to 21 OC48/STM16 per rack)
Cisco 12012	60 Gbps switching capacity High density broadband interfaces per system (up to 132 DS3s 11 OC48/STM16 per system)

Key Features

Scalable Performance
- Innovative switch fabric design supports virtual output queues (VoQs) to eliminate head-of-line blocking (HOLB) and increase overall system efficiency. Supports partial fulfillment for multicast traffic and replication of multicast traffic is performed by the switch fabric
- Distributed architecture delivers scalable Layer 3 switching performance through intelligent line cards (LCs) that can be added incrementally
Scalable Services
- Industry leading Cisco IOS ® software
- State-of-the-art queuing and congestion management techniques: random early detection (RED), weighted RED (WRED), and deficit round robin (DRR) that provide an enhanced weighted fair queuing (WFQ) mechanism
Carrier-Class Design
- Redundancy in all key system components

Specifications

Feature	Cisco 12008	Cisco 12012
Modular Slots	8 configurable 5 switch fabric	12 configurable 5 switch fabric
Line Card Slots	7 (maximum)	11 (maximum)
Supported Line Cards	1-port OC-48/STM-16 POS 1-port channelized OC-12 to DS3 1-port Gigabit Ethernet 1-port OC-12/STM-4 ATM 4-port OC-3/STM-1 ATM 1-port OC-12/STM-4 POS 4-port OC-3/STM-1 POS 12-port DS3 8-port Fast Ethernet 4-port OC-12/STM-4 POS 2-port/1 ring OC-12/STM-4 SRP	Same as Cisco 12008
Processor Speed (type)	200 MHz (R5000)	200 MHz (R5000)
Flash Memory	20 MB (default) 128 MB (maximum)	20 MB (default) 128 MB (maximum)
DRAM Memory	128 MB GRP (default); 256 MB EDO (max) 64 MB line cards (default); 256 MB EDO (max) 64 MB buffered memory (default) to 256 MB (max) varies by line card	Same as Cisco 12008
Power Supply	AC or DC	AC or DC
Dimensions (HxWxD)	24.85 x 17.4 x 21.2 in.	56 x 17.3 x 21 in.

Competitive Products

Juniper: M40

For More Information

See the Cisco 12000 Series Web site: http://www.cisco.com/warp/customer/cc/cisco/mkt/core/12000/

¹For ordering information on this product, contact your Cisco Account Team.
²For ordering information on these products, contact your Cisco Account Team.
³For ordering information on this product, contact your Cisco Account Team.
⁴For ordering information on this product, contact your Cisco Account Team.

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required¹	DRAM Memory Required1
CD25-C-11.3(9)=	IP only	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	4 MB 4 MB 4 MB
CD25-CH-11.3(9)=	IP/Firewall	11.3(9)T	8 MB	6 MB
CD25-CP-11.3(9)=	IP Plus	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	4 MB 4 MB 4 MB
CD25-CY-11.3(9)=	IP Plus 56	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	4 MB 4 MB 4 MB
CD25-CL-11.3(9)=	IP Plus IPSec 56	11.3(9)T	8 MB	4 MB
CD25-B-11.3(9)=	IP/IPX/AT/DEC	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	4 MB 4 MB 4 MB
CD25-BP-11.3(9)=	IP/IPX/AT/DEC Plus	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	6 MB 6 MB 6 MB
CD25-AP-11.3(9)=	Enterprise Plus	11.2(18) 11.3(9) 11.3(9)T	8 MB 16 MB 16 MB	6 MB 6 MB 6 MB
CD25-AL-11.3(9)=	Enterprise Plus IPSec 56	11.3(9)T	16 MB	8 MB
CD25-E-11.3(9)=	Remote access server	11.2(18) 11.3(9) 11.3(9)T	8 MB 8 MB 8 MB	4 MB 6 MB 6 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required¹	DRAM Memory Required1
CD26-C-12.0(5)=	IP only	12.0(5)	4 MB	20 MB
CD26-CP-12.0(5)=	IP Plus	12.0(5)	8 MB	32 MB
CD26-CH-12.0(5)=	IP/Firewall with NAT	12.0(5)	4 MB	20 MB
CD26-CHL-12.0(5)=	IP/Firewall Plus IPSec 56	12.0(5)	8 MB	32 MB
CD26-CHK2-12.0(5)=	IP/Firewall Plus IPSec 3DES	12.0(5)	8 MB	32 MB
CD26-CW-12.0(5)=	IP Plus 40	12.0(5)	8 MB	32 MB
CD26-CL-12.0(5)=	IP Plus IPSec 56	12.0(5)	8 MB	32 MB
CD26-CK2-12.0(5)=	IP Plus IPSec SF-DES	12.0(5)	8 MB	32 MB
CD26-B-12.0(5)=	IP/IPX/AT/DEC	12.0(5)	8 MB	24 MB
CD26-BHP-12.0(5)=	IP/IPX/AT/DEC/Firewall Plus	12.0(5)	8 MB	32 MB
CD26-BP-12.0(5)=	IP/IPX/AT/DEC Plus	12.0(5)	8 MB	32 MB
CD26-AP-12.0(5)=	Enterprise Plus	12.0(5)	8 MB	40 MB
CD26-AHK2-12.0(5)=	Enterprise/Firewall Plus IPSec 3DES	12.0(5)	8 MB	40 MB
CD26-AHL-12.0(5)=	Enterprise/Firewall Plus IPSec 56	12.0(5)	8 MB	40 MB
CD26-AL-12.0(5)=	Enterprise Plus IPSec 56	12.0(5)	8 MB	40 MB
CD26-AK2-12.0(5)=	Enterprise Plus IPSec 3DES	12.0(5)	8 MB	40 MB
CD26-ANP-12.0(5)=	Enterprise/APPN Plus	12.0(5)	8 MB	40 MB
CD26-ANL-12.0(5)=	Enterprise/APPN Plus IPSec 56	12.0(5)	16 MB	40 MB
CD26-E-12.0(5)=	Remote Access Server	12.0(5)	4 MB	20 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required¹	DRAM Memory Required
CD36-C-12.0.5=	IP only	12.0(5)T	8 MB	24 MB
CD36-CH-12.0.5=	IP/FW	12.0(5)T	8 MB	24 MB
CD36-CHK2-12.0.5=	IP/FW Plus IPSec 3DES	12.0(5)T	8 MB	24 MB
CD36-CP-12.0.5=	IP Plus	12.0(5)T	8 MB	32 MB
CD36-CL-12.0.5=	IP Plus IPSec 56	12.0(5)T	8 MB	32 MB
CD36-CHL-12.0.5=	IP/FW Plus IPSec 56	12.0(5)T	8 MB	32 MB
CD36-B-12.0.5=	IP/IPX/AppleTalk/DECnet	12.0(5)T	8 MB	32 MB
CD36-BP-12.0.5=	IP/IPX/AppleTalk/DECnet Plus	12.0(5)T	16 MB	32 MB
CD36-BHP-12.0.5=	IP/IPX/AT/DEC/FW Plus	12.0(5)T	16 MB	32 MB
CD36-AP-12.0.5=	Enterprise Plus	12.0(5)T	16 MB	48 MB
CD36-AL-12.0.5=	Enterprise Plus IPSec 56	12.0(5)T	16 MB	48 MB
CD36-AHL-12.0.5=	Enterprise/FW Plus IPSec 56	12.0(5)T	16 MB	48 MB
CD36-AHK-12.0.5=	Enterprise/FW Plus IPSec 56 3DES	12.0(5)T	16 MB	48 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required
CD381-C-12.0=	IP	12.0(2)T	4 MB	16 MB
CD381-CP-12.0=	IP Plus	12.0(2)T	8 MB	32 MB
CD381-AP-12.0=	Enterprise Plus	12.0(2)T	8 MB	32 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required¹	DRAM Memory Required1
CD45-C-11.2=	IP only	11.2(14)P	4 MB	16 MB
CD45-CP-11.2=	IP Plus	11.2(14)P	4 MB	16 MB
CD45-CW-11.2=	IP Plus 40	11.2(14)P	4 MB	16 MB
CD45-CY-11.2=	IP Plus 56	11.2(14)P	4 MB	16 MB
CD45-B-11.2=	IP/IPX/AT/DEC	11.2(14)P	4 MB	16 MB
CD45-BW-11.2=	IP/IPX/AT/DEC Plus	11.2(14)P	8 MB	16 MB
CD45-BY-11.2=	IP/IPX/AT/DEC Plus 40	11.2(14)P	8 MB	16 MB
CD45-BP-11.2=	IP/IPX/AppleTalk/DECnet Plus 56	11.2(14)P	8 MB	16 MB
CD45-A-11.2=	Enterprise	11.2(14)P	8 MB	16 MB
CD45-AP-11.2=	Enterprise Plus	11.2(14)P	8 MB	16 MB
CD45-AW-11.2=	Enterprise Plus 40	11.2(14)P	8 MB	16 MB
CD45-AY-11.2=	Enterprise Plus 56	11.2(14)P	8 MB	16 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required	Shared Memory Required	Boot Flash Memory Required
CD52-C-12.0=	IP only	12.0(3)T	16 MB	8 MB	4 MB	8 MB
CD52-CP-12.0=	IP Plus	12.0(3)T	16 MB	8 MB	4 MB	8 MB
CD52-B-12.0=	Desktop	12.0(3)T	16 MB	8 MB	4 MB	8 MB
CD52-BP-12.0=	Desktop Plus	12.0(3)T	16 MB	8 MB	4 MB	8 MB
CD52-A-12.0=	Enterprise	12.0(3)T	16 MB	8 MB	4 MB	8 MB
CD52-AP-12.0=	Enterprise Plus	12.0(3)T	16 MB	8 MB	4 MB	8 MB

Distribution Part Number	Feature Pack Description	IOS Image Release	Flash Memory Required	DRAM Memory Required	Shared Memory Required	Boot Flash Memory Required
CD53-C-12.0=	IP only	12.0.2XD	8 MB	32 MB	16 MB	4 MB
CD53-CP-12.0=	IP Plus	12.0.2XD	8 MB	32 MB	16 MB	4 MB
CD53-B-12.0=	Desktop	12.0.2XD	8 MB	32 MB	16 MB	4 MB
CD53-BP-12.0=	Desktop Plus	12.0.2XD	8 MB	32 MB	16 MB	4 MB
CD53-A-12.0=	Enterprise	12.0.2XD	8 MB	32 MB	16 MB	4 MB
CD53-AP-12.0=	Enterprise Plus	12.0.2XD	8 MB	32 MB	16 MB	4 MB

Cisco AS5300 Series¹ Cisco AS5300 Series Access Server Bundles

AS53-48-CH	AS5301-CH, 48 Modems w/ Quad T1/PRI, IP s/w
AS53-96-CH	AS5301-CH, 96 Modems w/ Quad T1/PRI, IP s/w
AS53-96-RPS-CH	AS5301-CH, 96 Modems w/ Quad T1/PRI, RPS, IP s/w
AS53-108-CH	AS5301-CH, 108 Modems w/ Quad T1/PRI, IP s/w
AS53-192-RPS-CH	AS5300 Chassis, 192 Modems, Octal T1/PRI, Red AC Pwr, IP s/w
Cisco AS5300 Series Modules
AS53-4CT1=	Quad T1/PRI Card
AS53-4CE1=	Quad E1/PRI Card-Balanced/Unbalanced, Spare
AS53-CC-DM=	MICA Carrier Card
6DM=	6-Port MICA Modem Module
12DMM=	12-port Digital Modem Module (DMM)
AS53-48-C=	MICA Carrier Card and 8 MICA 6-port Modem Modules
AS53-4CT1+=	Quad T1/PRI Plus High Speed Serial
AS53-8CT1+=	Octal T1/PRI Plus High Speed Serial
AS53-96-CC2=	MICA CC2 carrier card and 8 MICA 12-port DMM modem modules
AS53-CC2-DM=	HMM/DMM MICA2 Carrier Card
Cisco AS5300 Series Modem Management Technology Licenses²
FR53-MMTL-48=	Modem Management Technology License (48 Modems)
FR53-MMTL-60=	Modem Management Technology License (60 Modems)
FR53-MMTL-96=	Modem Management Technology License (96 Modems)
FR53-MMTL-108=	Modem Management Technology License (108 Modems)
FR53-MMTL-120=	Modem Management Technology License (120 Modems)
Cisco AS5300 Series Software Feature Packs
CD53-C-12.0=	Cisco AS5300, IP only Feature Pack
CD53-CP-12.0=	Cisco AS5300, IP Plus Feature Pack
CD53-B-12.0=	Cisco AS5300, Desktop Feature Pack
CD53-BP-12.0=	Cisco AS5300, Desktop Plus Feature Pack
CD53-A-12.0=	Cisco AS5300, Enterprise Feature Pack
CD53-AP-12.0=	Cisco AS5300, Enterprise Plus Feature Pack
Cisco AS5300 Series Memory Options
MEM-16F-AS53=	Cisco AS5300, 8 MB to 16 MB Flash Upgrade
MEM-64M-AS53=	Cisco AS5300, 32 MB to 64 MB Main DRAM Upgrade
MEM-8BF-AS53=	Cisco AS5300, 4 MB to 8 MB Boot Flash Upgrade
Cisco AS5300 Series Accessories
AS5300RM-19=	Cisco AS5300, 19-Inch Rack Mount Kit
AS5300RM-24=	Cisco AS5300, 24-Inch Rack Mount Kit
AS53-AC-RPS=	Cisco AS5300, Dual AC Power Supply
Cisco AS5300 Series Basic Maintenance
CON-SNT-PKG14	Cisco AS5300 Series SMARTnet Maintenance

Table of Contents

Routers and Access Products